[edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs

[Jeremy Linton]

On 12/15/20 1:36 PM, Andrei Warkentin wrote:
> Reviewed-by: Andrey Warkentin <awarkentin at vmware.com>

Thanks,

To be clear i'm going to repost this one.


> ________________________________
> From: Jeremy Linton <jeremy.linton at arm.com>
> Sent: Tuesday, December 15, 2020 12:55 PM
> To: Andrei Warkentin <awarkentin at vmware.com>; devel at edk2.groups.io <devel at edk2.groups.io>
> Cc: ard.biesheuvel at arm.com <ard.biesheuvel at arm.com>; leif at nuviainc.com <leif at nuviainc.com>; pete at akeo.ie <pete at akeo.ie>; andrey.warkentin at gmail.com <andrey.warkentin at gmail.com>; samer.el-haj-mahmoud at arm.com <samer.el-haj-mahmoud at arm.com>
> Subject: Re: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
> 
> Hi,
> 
> On 12/15/20 12:21 PM, Andrei Warkentin wrote:
>> Could we rework some of these magic constants? Esp the SetPowerState ones.
> 
> Yes, I know from the mailbox description what the 1,1 do (on with
> wait?). But its clear as mud what the channel "0" really means. It seems
> to have varying definitions, from "power everything" to "power sd". So
> it may depend on model, but again, ugh, uboot is doing it.
> 
> 
>>
>> Do we need both EMMC and EMMC2 clocks enabled all the time?
> 
> I think so, not so much for edk2, but for the resulting OS. At least
> until we get AML to power on/enable them.
> 
> Which is sorta a todo at this point for the platform, we really should
> be supporting the ACPI power states and forwarding that info via mailbox
> commands.
> 
>>   > A
>> ________________________________
>> From: devel at edk2.groups.io <devel at edk2.groups.io> on behalf of Jeremy Linton via groups.io <jeremy.linton=arm.com at groups.io>
>> Sent: Monday, December 14, 2020 5:23 PM
>> To: devel at edk2.groups.io <devel at edk2.groups.io>
>> Cc: ard.biesheuvel at arm.com <ard.biesheuvel at arm.com>; leif at nuviainc.com <leif at nuviainc.com>; pete at akeo.ie <pete at akeo.ie>; andrey.warkentin at gmail.com <andrey.warkentin at gmail.com>; samer.el-haj-mahmoud at arm.com <samer.el-haj-mahmoud at arm.com>; Jeremy Linton <jeremy.linton at arm.com>
>> Subject: [edk2-devel] [PATCH 6/7] Platform/RaspberryPi: Power up sd, and tweak GPIOs
>>
>> It seems we should be powering up the sd cards, and possibly
>> the clocks as well to assure they are setup properly before
>> we attempt to access the controller.
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
>> ---
>>    Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 9 +++++++++
>>    1 file changed, 9 insertions(+)
>>
>> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> index 28f57438c5..8829740938 100644
>> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> @@ -552,6 +552,15 @@ ApplyVariables (
>>          GpioPinFuncSet (37, GPIO_FSEL_ALT3);
>>
>>          GpioPinFuncSet (38, GPIO_FSEL_ALT3);
>>
>>          GpioPinFuncSet (39, GPIO_FSEL_ALT3);
>>
>> +
>>
>> +      /*
>>
>> +       * power and clock everything by default
>>
>> +       */
>>
>> +      Status = mFwProtocol->SetPowerState (0, 1, 1); //SD on
>>
>> +      Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT,
>>
>> +                                           RPI_EXP_GPIO_DIR_OUT, 1); //3.3v
>>
>> +      Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2, 1);
>>
>> +      Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC, 1);
>>
>>        }
>>
>>      } else {
>>
>>        DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n", mModelFamily));
>>
>> --
>> 2.13.7
>>
>>
>>
>> -=-=-=-=-=-=
>> Groups.io Links: You receive all messages sent to this group.
>> View/Reply Online (#68818): https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Fmessage%2F68818&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=nSIj0mEg742NAcojf0oTDhWds2ZBoIJuQuvdo09sJzM%3D&reserved=0
>> Mute This Topic: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fmt%2F78964895%2F4387333&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ginptEm%2FCGAaCPtqLlmKqNMGEPWog3RhWBHuTh%2FIWG8%3D&reserved=0
>> Group Owner: devel+owner at edk2.groups.io
>> Unsubscribe: https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fedk2.groups.io%2Fg%2Fdevel%2Funsub&data=04%7C01%7Cawarkentin%40vmware.com%7C72669f70d63c494ac71408d8a12b1035%7Cb39138ca3cee4b4aa4d6cd83d9dd62f0%7C0%7C0%7C637436553643223033%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=NzTgITb5uDBkEggkjmjXgfdp0XpHEhJ8o9g1cPbVDNE%3D&reserved=0 [awarkentin at vmware.com]
>> -=-=-=-=-=-=
>>
>>
>>
> 
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68898): https://edk2.groups.io/g/devel/message/68898
Mute This Topic: https://groups.io/mt/78964895/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-