[edk2-devel] [PATCH v2 6/9] Platform/RaspberryPi: Power up sd, and tweak GPIOs

[Jeremy Linton]

It seems we should be powering up the sd cards, and possibly
the clocks as well to assure they are setup properly before
we attempt to access the controller.

Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
---
 Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
index 28f57438c5..e55ed63efa 100644
--- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
+++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
@@ -552,6 +552,16 @@ ApplyVariables (
       GpioPinFuncSet (37, GPIO_FSEL_ALT3);
       GpioPinFuncSet (38, GPIO_FSEL_ALT3);
       GpioPinFuncSet (39, GPIO_FSEL_ALT3);
+
+      /*
+       * power and clock everything by default
+       */
+      Status = mFwProtocol->SetPowerState (RPI_MBOX_POWER_STATE_SDHCI,
+                                           TRUE, TRUE); //SD on with wait
+      Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT, 
+                                           RPI_EXP_GPIO_DIR_OUT, TRUE); //3.3v
+      Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2, TRUE);
+      Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC, TRUE);
     }
   } else {
     DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n", mModelFamily));
-- 
2.13.7



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68913): https://edk2.groups.io/g/devel/message/68913
Mute This Topic: https://groups.io/mt/78986324/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-