[edk2-devel] [PATCH v2 1/1] Silicon/FitGen: Enhance Slot mode support force mode for multiple FV.
Aaron Li
aaron.li at intel.com
Tue Dec 22 01:56:23 UTC 2020
Hi Bob & Liming,
I had replied in previous mail.
If SlotSize is zero, is it valid or not?
-- Slot size should not be zero, I'll change the code.
What purpose is for this new check?
-- The slot size should be larger than microcode size, since the microcode is contained by slot.
Do you agree with adding this new check, if so, I'll not remove this in my next patch.
Thanks.
Best,
Aaron
-----Original Message-----
From: Feng, Bob C <bob.c.feng at intel.com>
Sent: Tuesday, December 22, 2020 9:47 AM
To: devel at edk2.groups.io; gaoliming at byosoft.com.cn; Li, Aaron <aaron.li at intel.com>
Subject: RE: [edk2-devel] [PATCH v2 1/1] Silicon/FitGen: Enhance Slot mode support force mode for multiple FV.
Aaron,
I have the same questions.
Thanks,
Bob
-----Original Message-----
From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of gaoliming
Sent: Tuesday, December 22, 2020 9:37 AM
To: devel at edk2.groups.io; Li, Aaron <aaron.li at intel.com>
Cc: Feng, Bob C <bob.c.feng at intel.com>
Subject: 回复: [edk2-devel] [PATCH v2 1/1] Silicon/FitGen: Enhance Slot mode support force mode for multiple FV.
Aaron:
I add my comment.
Thanks
Liming
> -----邮件原件-----
> 发件人: bounce+27952+69301+4905953+8761045 at groups.io
> <bounce+27952+69301+4905953+8761045 at groups.io> 代表 Aaron Li
> 发送时间: 2020年12月21日 14:26
> 收件人: devel at edk2.groups.io
> 抄送: Bob Feng <bob.c.feng at intel.com>; Liming Gao
> <gaoliming at byosoft.com.cn>
> 主题: [edk2-devel] [PATCH v2 1/1] Silicon/FitGen: Enhance Slot mode
support
> force mode for multiple FV.
>
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3122
>
> Adding "-LF"/"-lf" option to support slot mode without FFS GUID check.
> It will support the scenario that multiple Microcode FV with different
> FFS GUID enable slot mode.
> The size of slot should be 16 byte-aligned, and larger than every
> microcode.
>
> Signed-off-by: Aaron Li <aaron.li at intel.com>
> Cc: Bob Feng <bob.c.feng at intel.com>
> Cc: Liming Gao <gaoliming at byosoft.com.cn>
> ---
> Silicon/Intel/Tools/FitGen/FitGen.c | 39 +++++++++++++-------
> Silicon/Intel/Tools/FitGen/FitGen.h | 2 +-
> 2 files changed, 27 insertions(+), 14 deletions(-)
>
> diff --git a/Silicon/Intel/Tools/FitGen/FitGen.c
> b/Silicon/Intel/Tools/FitGen/FitGen.c
> index e9541c1e95cb..6f7ddedf7e5f 100644
> --- a/Silicon/Intel/Tools/FitGen/FitGen.c
> +++ b/Silicon/Intel/Tools/FitGen/FitGen.c
> @@ -333,9 +333,10 @@ Returns:
> "\t[-F <FitTablePointerOffset>] [-F
> <FitTablePointerOffset>]
[-V
> <FitHeaderVersion>]\n"
>
> "\t[-NA]\n"
>
> "\t[-A <MicrocodeAlignment>]\n"
>
> - "\t[-REMAP <TopFlashAddress>\n"
>
> + "\t[-REMAP <TopFlashAddress>\n"
>
> "\t[-CLEAR]\n"
>
> "\t[-L <MicrocodeSlotSize> <MicrocodeFfsGuid>]\n"
>
> + "\t[-LF <MicrocodeSlotSize>]\n"
>
> "\t[-I <BiosInfoGuid>]\n"
>
> "\t[-S <StartupAcmAddress
> StartupAcmSize>|<StartupAcmGuid>] [-V <StartupAcmVersion>]\n"
>
> "\t[-U <DiagnstAcmAddress>|<DiagnstAcmGuid>]\n"
>
> @@ -366,6 +367,7 @@ Returns:
> printf ("\tMicrocodeGuid - Guid of Microcode Module.\n");
>
> printf ("\tMicrocodeSlotSize - Occupied region size of each
> Microcode binary.\n");
>
> printf ("\tMicrocodeFfsGuid - Guid of FFS which is used to save
> Microcode binary");
>
> + printf ("\t-LF - Microcode Slot mode without FFS
> check, treat all Microcode FV as slot mode. In this case the Microcode
> FV should only contain one FFS.\n");
>
> printf ("\t-NA - No 0x800 aligned Microcode
> requirement. No -NA means Microcode is aligned with option
> MicrocodeAlignment value.\n");
>
> printf ("\tMicrocodeAlignment - HEX value of Microcode alignment.
> Ignored if \"-NA\" is specified. Default value is 0x800. The Microcode
update
> data must start at a 16-byte aligned linear address.\n");
>
> printf ("\tRecordType - FIT entry record type. User should
> ensure it is ordered.\n");
>
> @@ -882,11 +884,13 @@ Returns:
> UINTN FitEntryNumber;
>
> BOOLEAN BiosInfoExist;
>
> BOOLEAN SlotMode;
>
> + BOOLEAN SlotModeForce;
>
> BIOS_INFO_HEADER *BiosInfo;
>
> BIOS_INFO_STRUCT *BiosInfoStruct;
>
> UINTN BiosInfoIndex;
>
>
>
> - SlotMode = FALSE;
>
> + SlotMode = FALSE;
>
> + SlotModeForce = FALSE;
>
>
>
> //
>
> // Init index
>
> @@ -1031,7 +1035,9 @@ Returns:
> //
>
> if ((Index + 1 >= argc) ||
>
> ((strcmp (argv[Index], "-L") != 0) &&
>
> - (strcmp (argv[Index], "-l") != 0)) ) {
>
> + (strcmp (argv[Index], "-l") != 0) &&
>
> + (strcmp (argv[Index], "-LF") != 0) &&
>
> + (strcmp (argv[Index], "-lf") != 0))) {
>
> //
>
> // Bypass
>
> //
>
> @@ -1039,18 +1045,21 @@ Returns:
> } else {
>
> SlotSize = xtoi (argv[Index + 1]);
>
>
>
> - if (SlotSize == 0) {
>
> - printf ("Invalid slotsize = %d\n", SlotSize);
>
> + if (SlotSize & 0xF) {
>
> + printf ("Invalid slotsize = 0x%x, Microcode data must start at
> + a
> 16-byte aligned linear address!\n", SlotSize);
>
> return 0;
>
> }
>
If SlotSize is zero, is it valid or not?
> -
>
> - SlotMode = IsGuidData(argv[Index + 2], &MicrocodeFfsGuid);
>
> - if (!SlotMode) {
>
> - printf ("Need a ffs GUID for search uCode ffs\n");
>
> - return 0;
>
> + if (strcmp (argv[Index], "-LF") == 0 || strcmp (argv[Index],
> + "-lf")
== 0) {
>
> + SlotModeForce = TRUE;
>
> + Index += 2;
>
> + } else {
>
> + SlotMode = IsGuidData(argv[Index + 2], &MicrocodeFfsGuid);
>
> + if (!SlotMode) {
>
> + printf ("Need a ffs GUID for search uCode ffs\n");
>
> + return 0;
>
> + }
>
> + Index += 3;
>
> }
>
> -
>
> - Index += 3;
>
> }
>
>
>
> //
>
> @@ -1219,6 +1228,10 @@ Returns:
> gFitTableContext.FitEntryNumber++;
>
>
>
> if (SlotSize != 0) {
>
> + if (SlotSize < MicrocodeSize) {
>
> + printf ("Parameter incorrect, Slot size: %x is too
small
> for Microcode size: %x!\n", SlotSize, MicrocodeSize);
>
> + return 0;
>
> + }
What purpose is for this new check?
Thanks
Liming
>
> MicrocodeBuffer += SlotSize;
>
> } else {
>
> MicrocodeBuffer += MicrocodeSize;
>
> @@ -1228,7 +1241,7 @@ Returns:
> ///
>
> /// Check the remaining buffer
>
> ///
>
> - if (((UINT32)(MicrocodeBuffer - MicrocodeFileBuffer) <
> MicrocodeFileSize) && SlotMode != 0) {
>
> + if (((UINT32)(MicrocodeBuffer - MicrocodeFileBuffer) <
> MicrocodeFileSize) && (SlotMode || SlotModeForce)) {
>
> for (Walker = MicrocodeBuffer; Walker <
> MicrocodeFileBuffer + MicrocodeFileSize; Walker++) {
>
> if (*Walker != 0xFF) {
>
> printf ("Error: detect non-spare space after uCode
> array, please check uCode array!\n");
>
> diff --git a/Silicon/Intel/Tools/FitGen/FitGen.h
> b/Silicon/Intel/Tools/FitGen/FitGen.h
> index 435fc26209da..5add6a8870e9 100644
> --- a/Silicon/Intel/Tools/FitGen/FitGen.h
> +++ b/Silicon/Intel/Tools/FitGen/FitGen.h
> @@ -31,7 +31,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent //
> Utility version information
>
> //
>
> #define UTILITY_MAJOR_VERSION 0
>
> -#define UTILITY_MINOR_VERSION 63
>
> +#define UTILITY_MINOR_VERSION 64
>
> #define UTILITY_DATE __DATE__
>
>
>
> //
>
> --
> 2.29.2.windows.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#69301):
> https://edk2.groups.io/g/devel/message/69301
> Mute This Topic: https://groups.io/mt/79120990/4905953
> Group Owner: devel+owner at edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub
> [gaoliming at byosoft.com.cn]
> -=-=-=-=-=-=
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#69362): https://edk2.groups.io/g/devel/message/69362
Mute This Topic: https://groups.io/mt/79140789/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list