[edk2-devel] [PATCH v3 1/1] Silicon/FitGen: Enhance Slot mode support force mode for multiple FV.
Bob Feng
bob.c.feng at intel.com
Tue Dec 22 05:24:35 UTC 2020
Reviewed-by: Bob Feng <bob.c.feng at intel.com>
-----Original Message-----
From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Aaron Li
Sent: Tuesday, December 22, 2020 10:52 AM
To: devel at edk2.groups.io
Cc: Feng, Bob C <bob.c.feng at intel.com>; Liming Gao <gaoliming at byosoft.com.cn>
Subject: [edk2-devel] [PATCH v3 1/1] Silicon/FitGen: Enhance Slot mode support force mode for multiple FV.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3122
Adding "-LF"/"-lf" option to support slot mode without FFS GUID check.
It will support the scenario that multiple Microcode FV with different FFS GUID enable slot mode.
The size of slot should be 16 byte-aligned, and larger than every microcode.
Signed-off-by: Aaron Li <aaron.li at intel.com>
Cc: Bob Feng <bob.c.feng at intel.com>
Cc: Liming Gao <gaoliming at byosoft.com.cn>
---
Silicon/Intel/Tools/FitGen/FitGen.c | 39 +++++++++++++------- Silicon/Intel/Tools/FitGen/FitGen.h | 2 +-
2 files changed, 27 insertions(+), 14 deletions(-)
diff --git a/Silicon/Intel/Tools/FitGen/FitGen.c b/Silicon/Intel/Tools/FitGen/FitGen.c
index e9541c1e95cb..36e6e3c90518 100644
--- a/Silicon/Intel/Tools/FitGen/FitGen.c
+++ b/Silicon/Intel/Tools/FitGen/FitGen.c
@@ -333,9 +333,10 @@ Returns:
"\t[-F <FitTablePointerOffset>] [-F <FitTablePointerOffset>] [-V <FitHeaderVersion>]\n" "\t[-NA]\n" "\t[-A <MicrocodeAlignment>]\n"- "\t[-REMAP <TopFlashAddress>\n"+ "\t[-REMAP <TopFlashAddress>\n" "\t[-CLEAR]\n" "\t[-L <MicrocodeSlotSize> <MicrocodeFfsGuid>]\n"+ "\t[-LF <MicrocodeSlotSize>]\n" "\t[-I <BiosInfoGuid>]\n" "\t[-S <StartupAcmAddress StartupAcmSize>|<StartupAcmGuid>] [-V <StartupAcmVersion>]\n" "\t[-U <DiagnstAcmAddress>|<DiagnstAcmGuid>]\n"@@ -366,6 +367,7 @@ Returns:
printf ("\tMicrocodeGuid - Guid of Microcode Module.\n"); printf ("\tMicrocodeSlotSize - Occupied region size of each Microcode binary.\n"); printf ("\tMicrocodeFfsGuid - Guid of FFS which is used to save Microcode binary");+ printf ("\t-LF - Microcode Slot mode without FFS check, treat all Microcode FV as slot mode. In this case the Microcode FV should only contain one FFS.\n"); printf ("\t-NA - No 0x800 aligned Microcode requirement. No -NA means Microcode is aligned with option MicrocodeAlignment value.\n"); printf ("\tMicrocodeAlignment - HEX value of Microcode alignment. Ignored if \"-NA\" is specified. Default value is 0x800. The Microcode update data must start at a 16-byte aligned linear address.\n"); printf ("\tRecordType - FIT entry record type. User should ensure it is ordered.\n");@@ -882,11 +884,13 @@ Returns:
UINTN FitEntryNumber; BOOLEAN BiosInfoExist; BOOLEAN SlotMode;+ BOOLEAN SlotModeForce; BIOS_INFO_HEADER *BiosInfo; BIOS_INFO_STRUCT *BiosInfoStruct; UINTN BiosInfoIndex; - SlotMode = FALSE;+ SlotMode = FALSE;+ SlotModeForce = FALSE; // // Init index@@ -1031,7 +1035,9 @@ Returns:
// if ((Index + 1 >= argc) || ((strcmp (argv[Index], "-L") != 0) &&- (strcmp (argv[Index], "-l") != 0)) ) {+ (strcmp (argv[Index], "-l") != 0) &&+ (strcmp (argv[Index], "-LF") != 0) &&+ (strcmp (argv[Index], "-lf") != 0))) { // // Bypass //@@ -1039,18 +1045,21 @@ Returns:
} else { SlotSize = xtoi (argv[Index + 1]); - if (SlotSize == 0) {- printf ("Invalid slotsize = %d\n", SlotSize);+ if (SlotSize == 0 || SlotSize & 0xF) {+ printf ("Invalid slotsize = 0x%x, slot size should not be zero, or start at a non-16-byte aligned linear address!\n", SlotSize); return 0; }-- SlotMode = IsGuidData(argv[Index + 2], &MicrocodeFfsGuid);- if (!SlotMode) {- printf ("Need a ffs GUID for search uCode ffs\n");- return 0;+ if (strcmp (argv[Index], "-LF") == 0 || strcmp (argv[Index], "-lf") == 0) {+ SlotModeForce = TRUE;+ Index += 2;+ } else {+ SlotMode = IsGuidData(argv[Index + 2], &MicrocodeFfsGuid);+ if (!SlotMode) {+ printf ("Need a ffs GUID for search uCode ffs\n");+ return 0;+ }+ Index += 3; }-- Index += 3; } //@@ -1219,6 +1228,10 @@ Returns:
gFitTableContext.FitEntryNumber++; if (SlotSize != 0) {+ if (SlotSize < MicrocodeSize) {+ printf ("Parameter incorrect, Slot size: %x is too small for Microcode size: %x!\n", SlotSize, MicrocodeSize);+ return 0;+ } MicrocodeBuffer += SlotSize; } else { MicrocodeBuffer += MicrocodeSize;@@ -1228,7 +1241,7 @@ Returns:
/// /// Check the remaining buffer ///- if (((UINT32)(MicrocodeBuffer - MicrocodeFileBuffer) < MicrocodeFileSize) && SlotMode != 0) {+ if (((UINT32)(MicrocodeBuffer - MicrocodeFileBuffer) < MicrocodeFileSize) && (SlotMode || SlotModeForce)) { for (Walker = MicrocodeBuffer; Walker < MicrocodeFileBuffer + MicrocodeFileSize; Walker++) { if (*Walker != 0xFF) { printf ("Error: detect non-spare space after uCode array, please check uCode array!\n");diff --git a/Silicon/Intel/Tools/FitGen/FitGen.h b/Silicon/Intel/Tools/FitGen/FitGen.h
index 435fc26209da..5add6a8870e9 100644
--- a/Silicon/Intel/Tools/FitGen/FitGen.h
+++ b/Silicon/Intel/Tools/FitGen/FitGen.h
@@ -31,7 +31,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
// Utility version information // #define UTILITY_MAJOR_VERSION 0-#define UTILITY_MINOR_VERSION 63+#define UTILITY_MINOR_VERSION 64 #define UTILITY_DATE __DATE__ //--
2.29.2.windows.2
-=-=-=-=-=-=
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#69368): https://edk2.groups.io/g/devel/message/69368
Mute This Topic: https://groups.io/mt/79141784/1768742
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [bob.c.feng at intel.com] -=-=-=-=-=-=
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#69370): https://edk2.groups.io/g/devel/message/69370
Mute This Topic: https://groups.io/mt/79141784/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list