[edk2-devel] [PATCH 0/4] MdeModulePkg/AtaAtapiPassThru: Add SATA error recovery

[Wu, Hao A]

> -----Original Message-----
> From: Albecki, Mateusz <mateusz.albecki at intel.com>
> Sent: Tuesday, November 3, 2020 9:24 PM
> To: devel at edk2.groups.io
> Cc: Albecki, Mateusz <mateusz.albecki at intel.com>; Ni, Ray
> <ray.ni at intel.com>; Wu, Hao A <hao.a.wu at intel.com>
> Subject: [PATCH 0/4] MdeModulePkg/AtaAtapiPassThru: Add SATA error
> recovery
> 
> To increase boot stability when booting from SATA drives SATA driver should
> implement the AHCI spec defined port error recovery. This will allow the
> driver to handle random fails on SATA link.
> 
> Performed tests on 2 setups. One with AHCI controller booting OS
> successfully without error recovery(control setup) and other which fails 1 in 5
> times(fail setup).
> 
> Tests performed:
> 1. Booted control setup to OS successfully.
> 2. Checked if during normal boot none of the packets is repeated(this came
> up after previous code version had a bug which repeated each DMA packet 5
> times).


Some more information:
For the bug mentioned above in point 2, the discussion can be referred here:
https://github.com/malbecki/edk2/commit/9ea81cadf38725e194ec01e0b0c556fd133f3ced#r43226067

For the other discussion we did before this patch, please refer to:
https://github.com/malbecki/edk2/commits/sata_recovery

Best Regards,
Hao Wu


> 3. Booted control setup to OS with simulated errors appearing on first packet
> of every DMA transaction.
> 4. Performed extensive tests on fail setup. Fail rate decreased from 20%
> failure to ~1% failure. 1% failure is observed during OS execution, not BIOS so
> in a way boot is 100% stable).
> 
> Change pushed to github:
> This series:
> https://github.com/malbecki/edk2/commits/sata_recovery2
> Simulated errors:
> https://github.com/malbecki/edk2/commits/sata_recovery_simulated_erro
> r
> 
> Signed-off-by: Mateusz Albecki <mateusz.albecki at intel.com>
> 
> Cc: Ray Ni <ray.ni at intel.com>
> Cc: Hao A Wu <hao.a.wu at intel.com>
> 
> Albecki (4):
>   MdeModulePkg/AtaAtapiPassThru: Check IS to check for command
>     completion
>   MdeModulePkg/AtaAtapiPassThru: Add SATA error recovery flow
>   MdeModulePkg/AtaAtapiPassThru: Restart failed packets
>   MdeModulePkg/AtaAtapiPassThru: Trace ATA packets
> 
>  .../Bus/Ata/AtaAtapiPassThru/AhciMode.c       | 801 +++++++++++-------
>  .../Bus/Ata/AtaAtapiPassThru/AhciMode.h       |  16 +-
>  2 files changed, 532 insertions(+), 285 deletions(-)
> 
> --
> 2.28.0.windows.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#66950): https://edk2.groups.io/g/devel/message/66950
Mute This Topic: https://groups.io/mt/78005842/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-