[edk2-devel] [PATCH 0/4] SEV Encrypted Boot for Ovmf
Dr. David Alan Gilbert
dgilbert at redhat.com
Thu Nov 12 19:38:04 UTC 2020
* Brijesh Singh (brijesh.singh at amd.com) wrote:
> Hi James,
>
> Thanks for series, I glanced at it, the changes looks okay to me. I have
> one questions.
>
> How does the grub locate the disk decryption key ? Am I correct in
> assuming that the gurb is iterating through a configuration table
> entries and comparing the Secret GUID to locate the secret key. As per
> the SEV spec, its possible that a guest owner can call the secret
> injection more than once. I don't see the patch consider that case,
> should we support this or limit to one inject? Maybe Qemu can enforce
> this property.
That's interesting, I hadn't realised that was possible - however,
I can't see a way to use it - for it to be useful, you would have to
have a way for the guest to communicate to the owner that it had
finished with the first injection and would like the next; but if you
already have a way to communicate from the guest to the owner to request
stuff, then you could pass a new secret by that comms route?
> Do you see any need for the Linux kernel needing to access the secret?
> Since the secret blob is available through configuration table, I
> believe we can have a platform driver that can read the configuration
> table and retrieve the secret blob.
I guess it depends if you get the Grub to pass the fs secret down to the
kernel or let it pick it up itself from the same place.
Dave
>
> thanks
>
> On 11/11/20 6:13 PM, James Bottomley wrote:
> > From: James Bottomley <James.Bottomley at HansenPartnership.com>
> >
> > This patch series is modelled on the structure of the Bhyve patches
> > for Ovmf, since it does somewhat similar things. This patch series
> > creates a separate build for an AmdSev OVMF.fd that does nothing
> > except combine with grub and boot straight through the internal grub
> > to try to mount an encrypted volume.
> >
> > Concept: SEV Secure Encrypted Images
> > ====================================
> >
> > The SEV patches in Linux and OVMF allow for the booting of SEV VMs in
> > an encrypted state, but don't really show how this could be done with
> > an encrypted image. Since the key used to decrypt the image must be
> > maintained within the SEV encryption envelope, encrypted QCOW is not
> > an option because the key would then have to be known to QEMU which is
> > outside the encryption envelope. The proposal here is that an
> > encrypted image should be a QCOW image consisting of two partitions,
> > the normal unencrypted EFI partition (Identifying it as an OVMF
> > bootable image) and a luks encrypted root partition. The kernel would
> > be inside the encrypted root in the /boot directory. The secret
> > injected securely through QEMU is extracted by OVMF and passed to grub
> > which uses it to mount the encrypted root and boot the kernel
> > normally. The creator of the secret bundle must be satisfied with the
> > SEV attestation before the secret is constructed. Unfortunately, the
> > SEV attestation can only be on the first QEMU firmware volume and
> > nothing else, so this patch series builds grub itself into a firmware
> > volume and places it inside OVMF so that the entire boot system can be
> > attested. In a normal OVMF KVM system, the variable store is on the
> > second flash volume (which is read/write). Unfortunately, this
> > mutable configuration provided by the variables is outside the
> > attestation envelope and can significantly alter the boot path,
> > possibly leading to secret leak, so encrypted image boot should only
> > be done with the OVMF.fd that combines both the code and variables.
> > the OVMF.fd is constructed so that it becomes impossible to interrupt
> > the boot sequence after attestation and the system will either boot
> > the image or fail. The boot sequence runs the grub.efi embedded in the
> > OVMF firmware volume so the encrypted image owner knows their own
> > version of grub is the only one that will boot before injecting the
> > secret. Note this boot path actually ignores the unencrypted EFI
> > partition. However, as part of this design, the encrypted image may be
> > booted by a standard OVMF KVM boot and in that case, the user will
> > have to type the encryption password. This standard boot will be
> > insecure but it might be used by the constructor of the encrypted
> > images on their own private laptop, for instance. The standard boot
> > path will use the unencrypted EFI partition.
> >
> > Patches Required Outside of OVMF
> > ================================
> >
> > There is a patch set to grub which allows it to extract the SEV secret
> > area from the configuration table and use the secret as a password to
> > do a luks crypto mount of root (this is the sevsecret grub module).
> >
> > There is also a patch to qemu which allows it to search through the
> > OVMF.fd and find the SEV secret area which is now described inside the
> > Reset Vector using the existing SEV_ES reset block. This area is the
> > place QEMU will inject the encrypted SEV secret bundle.
> >
> > Security of the System
> > ======================
> >
> > Since Grub is now part of the attested OVMF.fd bundle, the VM owner
> > knows absolutely that it will proceed straight to partition decryption
> > inside the attested code and boot the kernel off the encrypted
> > partition. Even if a different QCOW image is substituted, the boot
> > will fail without revealing the secret because the system is designed
> > to fail hard in that case and because the secret is always contained
> > within the encrypted envelope it should be impossible for the cloud
> > operator to obtain it even if they can pause the boot and examine the
> > machine memory.
> >
> > Putting it All Together
> > =======================
> >
> > This is somewhat hard. You must first understand how to boot a QEMU
> > system so as to have the VM pause after firmware loading (-S option)
> > and use the qmp port to request an attestation. Only if the
> > attestation corresponds to the expected sha256sum of OVMF.fd should
> > the secret bundle be constructed and injected using qmp. The tools
> > for constructing the secret bundle are in
> >
> > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FAMDESE%2Fsev-tool%2F&data=04%7C01%7Cbrijesh.singh%40amd.com%7Ceb007b21e05c4e9c05cf08d8869fc874%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637407368116062086%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=BbCtv37bH0%2B6JDLM3afAubVN6K0Y%2FdO4TRz4ZkP1AKg%3D&reserved=0
>
>
> Where you able to use the sev-tool as-is to generate a secret blob that
> can be injected through the Qemu QMP interface? The reason why I am
> asking this is because the last time when I looked at the sev-tool I
> found that it did not generated the blob which was in the correct format.
>
>
> >
> > James
> >
> > ---
> >
> > James Bottomley (4):
> > OvmfPkg/Amdsev: Base commit to build encrypted boot specific OVMF
> > OvmfPkg/AmdSev: add Grub Firmware Volume Package
> > OvmfPkg: create a SEV secret area in the AmdSev memfd
> > OvmfPkg/AmdSev: Expose the Sev Secret area using a configuration table
> >
> > OvmfPkg/OvmfPkg.dec | 6 +
> > OvmfPkg/AmdSev/AmdSevX64.dsc | 1035 +++++++++++
> > OvmfPkg/AmdSev/AmdSevX64.fdf | 515 ++++++
> > OvmfPkg/AmdSev/Grub/Grub.inf | 37 +
> > .../SevLaunchSecret/SecretDxe/SecretDxe.inf | 38 +
> > .../SevLaunchSecret/SecretPei/SecretPei.inf | 46 +
> > .../PlatformBootManagerLibGrub.inf | 84 +
> > OvmfPkg/ResetVector/ResetVector.inf | 4 +
> > .../PlatformBootManagerLibGrub/BdsPlatform.h | 179 ++
> > .../SevLaunchSecret/SecretDxe/SecretDxe.c | 29 +
> > .../SevLaunchSecret/SecretPei/SecretPei.c | 26 +
> > .../PlatformBootManagerLibGrub/BdsPlatform.c | 1538 +++++++++++++++++
> > .../PlatformBootManagerLibGrub/PlatformData.c | 213 +++
> > OvmfPkg/AmdSev/Grub/.gitignore | 1 +
> > OvmfPkg/AmdSev/Grub/grub.cfg | 35 +
> > OvmfPkg/AmdSev/Grub/grub.sh | 54 +
> > OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 4 +
> > OvmfPkg/ResetVector/ResetVector.nasmb | 2 +
> > 18 files changed, 3846 insertions(+)
> > create mode 100644 OvmfPkg/AmdSev/AmdSevX64.dsc
> > create mode 100644 OvmfPkg/AmdSev/AmdSevX64.fdf
> > create mode 100644 OvmfPkg/AmdSev/Grub/Grub.inf
> > create mode 100644 OvmfPkg/AmdSev/SevLaunchSecret/SecretDxe/SecretDxe.inf
> > create mode 100644 OvmfPkg/AmdSev/SevLaunchSecret/SecretPei/SecretPei.inf
> > create mode 100644 OvmfPkg/Library/PlatformBootManagerLibGrub/PlatformBootManagerLibGrub.inf
> > create mode 100644 OvmfPkg/Library/PlatformBootManagerLibGrub/BdsPlatform.h
> > create mode 100644 OvmfPkg/AmdSev/SevLaunchSecret/SecretDxe/SecretDxe.c
> > create mode 100644 OvmfPkg/AmdSev/SevLaunchSecret/SecretPei/SecretPei.c
> > create mode 100644 OvmfPkg/Library/PlatformBootManagerLibGrub/BdsPlatform.c
> > create mode 100644 OvmfPkg/Library/PlatformBootManagerLibGrub/PlatformData.c
> > create mode 100644 OvmfPkg/AmdSev/Grub/.gitignore
> > create mode 100644 OvmfPkg/AmdSev/Grub/grub.cfg
> > create mode 100644 OvmfPkg/AmdSev/Grub/grub.sh
> >
>
--
Dr. David Alan Gilbert / dgilbert at redhat.com / Manchester, UK
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#67399): https://edk2.groups.io/g/devel/message/67399
Mute This Topic: https://groups.io/mt/78198617/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list