[edk2-devel] [PATCH v2 2/4] OvmfPkg/VmgExitLib: Add support for new MMIO MOV opcodes

[Laszlo Ersek]

On 04/27/21 18:21, Lendacky, Thomas wrote:
> From: Tom Lendacky <thomas.lendacky at amd.com>
> 
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
> 
> Enabling TPM support results in guest termination of an SEV-ES guest
> because it uses MMIO opcodes that are not currently supported.
> 
> Add support for the new MMIO opcodes (0xA0 - 0xA3), MOV instructions which
> use a memory offset directly encoded in the instruction. Also, add a DEBUG
> statement to identify an unsupported MMIO opcode being used.
> 
> Fixes: c45f678a1ea2080344e125dc55b14e4b9f98483d
> Cc: Laszlo Ersek <lersek at redhat.com>
> Cc: Ard Biesheuvel <ardb+tianocore at kernel.org>
> Cc: Jordan Justen <jordan.l.justen at intel.com>
> Cc: Brijesh Singh <brijesh.singh at amd.com>
> Cc: Erdem Aktas <erdemaktas at google.com>
> Cc: James Bottomley <jejb at linux.ibm.com>
> Cc: Jiewen Yao <jiewen.yao at intel.com>
> Cc: Min Xu <min.m.xu at intel.com>
> Signed-off-by: Tom Lendacky <thomas.lendacky at amd.com>
> ---
>  OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c | 111 ++++++++++++++++++++
>  1 file changed, 111 insertions(+)
> 
> diff --git a/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c b/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c
> index dd117f971134..4d001406d30f 100644
> --- a/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c
> +++ b/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c
> @@ -678,6 +678,7 @@ MmioExit (
>    UINTN   Bytes;
>    UINT64  *Register;
>    UINT8   OpCode, SignByte;
> +  UINTN   Address;
>  
>    Bytes = 0;
>  
> @@ -727,6 +728,57 @@ MmioExit (
>      }
>      break;
>  
> +  //
> +  // MMIO write (MOV moffsetX, aX)
> +  //
> +  case 0xA2:
> +    Bytes = 1;
> +    //
> +    // fall through
> +    //
> +  case 0xA3:
> +    Bytes = ((Bytes != 0) ? Bytes :
> +             (InstructionData->DataSize == Size16Bits) ? 2 :
> +             (InstructionData->DataSize == Size32Bits) ? 4 :
> +             (InstructionData->DataSize == Size64Bits) ? 8 :
> +             0);
> +
> +    InstructionData->ImmediateSize = (UINTN) (1 << InstructionData->AddrSize);
> +    InstructionData->End += InstructionData->ImmediateSize;
> +
> +    //
> +    // This code is X64 only, so a possible 8-byte copy to a UINTN is ok.
> +    // Use a STATIC_ASSERT to be certain the code is being built as X64.
> +    //
> +    STATIC_ASSERT (
> +      sizeof (UINTN) == sizeof (UINT64),
> +      "sizeof (UINTN) != sizeof (UINT64), this file must be built as X64"
> +      );
> +
> +    Address = 0;
> +    CopyMem (
> +      &Address,
> +      InstructionData->Immediate,
> +      InstructionData->ImmediateSize
> +      );
> +
> +    Status = ValidateMmioMemory (Ghcb, Address, Bytes);
> +    if (Status != 0) {
> +      return Status;
> +    }
> +
> +    ExitInfo1 = Address;
> +    ExitInfo2 = Bytes;
> +    CopyMem (Ghcb->SharedBuffer, &Regs->Rax, Bytes);
> +
> +    Ghcb->SaveArea.SwScratch = (UINT64) Ghcb->SharedBuffer;
> +    VmgSetOffsetValid (Ghcb, GhcbSwScratch);
> +    Status = VmgExit (Ghcb, SVM_EXIT_MMIO_WRITE, ExitInfo1, ExitInfo2);
> +    if (Status != 0) {
> +      return Status;
> +    }
> +    break;
> +
>    //
>    // MMIO write (MOV reg/memX, immX)
>    //
> @@ -809,6 +861,64 @@ MmioExit (
>      CopyMem (Register, Ghcb->SharedBuffer, Bytes);
>      break;
>  
> +  //
> +  // MMIO read (MOV aX, moffsetX)
> +  //
> +  case 0xA0:
> +    Bytes = 1;
> +    //
> +    // fall through
> +    //
> +  case 0xA1:
> +    Bytes = ((Bytes != 0) ? Bytes :
> +             (InstructionData->DataSize == Size16Bits) ? 2 :
> +             (InstructionData->DataSize == Size32Bits) ? 4 :
> +             (InstructionData->DataSize == Size64Bits) ? 8 :
> +             0);
> +
> +    InstructionData->ImmediateSize = (UINTN) (1 << InstructionData->AddrSize);
> +    InstructionData->End += InstructionData->ImmediateSize;
> +
> +    //
> +    // This code is X64 only, so a possible 8-byte copy to a UINTN is ok.
> +    // Use a STATIC_ASSERT to be certain the code is being built as X64.
> +    //
> +    STATIC_ASSERT (
> +      sizeof (UINTN) == sizeof (UINT64),
> +      "sizeof (UINTN) != sizeof (UINT64), this file must be built as X64"
> +      );
> +
> +    Address = 0;
> +    CopyMem (
> +      &Address,
> +      InstructionData->Immediate,
> +      InstructionData->ImmediateSize
> +      );
> +
> +    Status = ValidateMmioMemory (Ghcb, Address, Bytes);
> +    if (Status != 0) {
> +      return Status;
> +    }
> +
> +    ExitInfo1 = Address;
> +    ExitInfo2 = Bytes;
> +
> +    Ghcb->SaveArea.SwScratch = (UINT64) Ghcb->SharedBuffer;
> +    VmgSetOffsetValid (Ghcb, GhcbSwScratch);
> +    Status = VmgExit (Ghcb, SVM_EXIT_MMIO_READ, ExitInfo1, ExitInfo2);
> +    if (Status != 0) {
> +      return Status;
> +    }
> +
> +    if (Bytes == 4) {
> +      //
> +      // Zero-extend for 32-bit operation
> +      //
> +      Regs->Rax = 0;
> +    }
> +    CopyMem (&Regs->Rax, Ghcb->SharedBuffer, Bytes);
> +    break;
> +
>    //
>    // MMIO read w/ zero-extension ((MOVZX regX, reg/memX)
>    //
> @@ -886,6 +996,7 @@ MmioExit (
>      break;
>  
>    default:
> +    DEBUG ((DEBUG_ERROR, "Invalid MMIO opcode (%x)\n", OpCode));
>      Status = GP_EXCEPTION;
>      ASSERT (FALSE);
>    }
> 

Thanks for the updates!

Acked-by: Laszlo Ersek <lersek at redhat.com>

Laszlo



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#74568): https://edk2.groups.io/g/devel/message/74568
Mute This Topic: https://groups.io/mt/82407856/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-