[edk2-devel] [PATCH v2 0/4] ArmPlatformPkg: Add support to generate HEST ACPI table
Sami Mujawar
sami.mujawar at arm.com
Mon Aug 2 12:49:41 UTC 2021
Hi Omkar,
Thank you for this patch series and for the clear explaination below.
The explaination below is very useful for anyone who is trying to
understand the code.
Since the cover letter will not be part of the patch commit messages,
would it be possible to include this explanation:
1. as part of a commit message for one of the patches in this series
(patch 2/4 or 3/4).
Or
2. in a Readme.md file
Regards,
Sami Mujawar
On 10/07/2021 05:18 PM, Omkar Anand Kulkarni wrote:
> Changes since v1:
> - Helper added for HEST ACPI table generation.
> - Rebased to the latest upstream code.
>
> Hardware Error Source Table (HEST)[1] and Software Delegated Exception Interface
> (SDEI)[2] ACPI tables are used to acomplish firmware first error handling.This
> patch series introduces a framework to build and install the HEST ACPI table
> dynamically.
>
> The following figure illustrates the possible usage of the dyanamic
> generation of HEST ACPI table.
>
> NS | S
> +--------------------------------------+--------------------------------------+
> | | |
> |+-------------------------------------+---------------------+ |
> || +---------------------+--------------------+| |
> || | | || |
> || +-----------+ |+------------------+ | +-----------------+|| +-------------+|
> || |HestTable | || HestErrorSource | | | HestErrorSource ||| | DMC-620 ||
> || | DXE | || DXE | | | StandaloneMM ||| |Standalone MM||
> || +-----------+ |+------------------+ | +-----------------+|| +-------------+|
> || |GHESv2 | || |
> || +---------------------+--------------------+| |
> || +--------------------+ | | |
> || |PlatformErrorHandler| | | |
> || | DXE | | | |
> || +--------------------+ | | |
> ||FF FWK | | |
> |+-------------------------------------+---------------------+ |
> | | |
> +--------------------------------------+--------------------------------------+
> |
> Figure: Firmware First Error Handling approach.
>
> All the hardware error sources are added to HEST table as GHESv2[3] error source
> descriptors. The framework comprises of following DXE and MM drivers:
>
> - HestTableDxe:
> Builds HEST table header and allows appending error source descriptors to the
> HEST table. Also provides protocol interface to install the built HEST table.
>
> - HestErrorSourceDxe & HestErrorSourceStandaloneMM:
> These two drivers together retrieve all possible error source descriptors of
> type GHESv2 from the MM drivers implementing HEST Error Source Descriptor
> protocol. Once all the descriptors are collected HestErrorSourceDxe appends
> it to HEST table using HestTableDxe driver.
>
> - PlatformErrorHandlerDxe:
> Builds and installs SDEI ACPI table. This driver does not initialize(load)
> until HestErrorSourceDxe driver has finished appending all possible GHESv2
> error source descriptors to the HEST table. Once that is complete using the
> HestTableDxe driver it installs the HEST table.
>
> This patch series provides reference implementation for DMC-620 Dynamic Memory
> Controller[4] that has RAS feature enabled. This is platform code
> implemented as Standalone MM driver in edk2-platforms.
>
> References:
> [1] : ACPI 6.3, Table 18-382, Hardware Error Source Table
> [2] : SDEI Platform Design Document, revision b, 10 Appendix C, ACPI table
> definitions for SDEI
> [3] : ACPI Reference Specification 6.3, Table 18-393 GHESv2 Structure
> [4] : DMC620 Dynamic Memory Controller, revision r1p0
> [5] : UEFI Reference Specification 2.8, Appendix N - Common Platform Error
> Record
> [6] : UEFI Reference Specification 2.8, Section N.2.5 Memory Error Section
>
> Link to github branch with the patches in this series -
> https://github.com/omkkul01/edk2/tree/ras_firmware_first_edk2
>
> Omkar Anand Kulkarni (4):
> ArmPlatformPkg: Allow dynamic generation of HEST ACPI table
> ArmPlatformPkg: add definition for MM_HEST_ERROR_SOURCE_DESC_PROTOCOL
> ArmPlatformPkg: retreive error source descriptors from MM
> ArmPlatformPkg: Add helpers for HEST table generation
>
> ArmPlatformPkg/ArmPlatformPkg.dec | 12 +
> .../Drivers/Apei/HestDxe/HestDxe.inf | 49 +++
> .../HestMmErrorSources/HestErrorSourceDxe.inf | 44 +++
> .../HestErrorSourceStandaloneMm.inf | 51 +++
> .../HestMmErrorSourceCommon.h | 37 ++
> ArmPlatformPkg/Include/HestAcpiHeader.h | 49 +++
> .../Include/Protocol/HestErrorSourceInfo.h | 64 ++++
> ArmPlatformPkg/Include/Protocol/HestTable.h | 71 ++++
> ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c | 354 ++++++++++++++++++
> .../HestMmErrorSources/HestErrorSourceDxe.c | 308 +++++++++++++++
> .../HestErrorSourceStandaloneMm.c | 312 +++++++++++++++
> 11 files changed, 1351 insertions(+)
> create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.inf
> create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.inf
> create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.inf
> create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestMmErrorSourceCommon.h
> create mode 100644 ArmPlatformPkg/Include/HestAcpiHeader.h
> create mode 100644 ArmPlatformPkg/Include/Protocol/HestErrorSourceInfo.h
> create mode 100644 ArmPlatformPkg/Include/Protocol/HestTable.h
> create mode 100644 ArmPlatformPkg/Drivers/Apei/HestDxe/HestDxe.c
> create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.c
> create mode 100644 ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.c
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78523): https://edk2.groups.io/g/devel/message/78523
Mute This Topic: https://groups.io/mt/84115237/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list