[edk2-devel] [PATCH v3 7/7] MdeModulePkg: PiSmmIpl: Update MessageLength calculation for MmCommunicate
Kun Qin
kuqin12 at gmail.com
Tue Aug 17 05:08:07 UTC 2021
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3398
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3430
This change added support of installing `EFI_MM_COMMUNICATION3_PROTOCOL`.
MmCommunicate v3 routine that calculates message length is also updated
to remove ambiguity in contrast to v1 routine.
Cc: Jian J Wang <jian.j.wang at intel.com>
Cc: Hao A Wu <hao.a.wu at intel.com>
Cc: Eric Dong <eric.dong at intel.com>
Cc: Ray Ni <ray.ni at intel.com>
Signed-off-by: Kun Qin <kuqin12 at gmail.com>
---
Notes:
v3:
- Newly added v3 communicate protocol instance
MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c | 187 ++++++++++++++++++++
MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf | 2 +
2 files changed, 189 insertions(+)
diff --git a/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c b/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c
index 599a0cd01d80..356efa172cfd 100644
--- a/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c
+++ b/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c
@@ -11,6 +11,7 @@
#include <Protocol/SmmBase2.h>
#include <Protocol/SmmCommunication.h>
#include <Protocol/MmCommunication2.h>
+#include <Protocol/MmCommunication3.h>
#include <Protocol/SmmAccess2.h>
#include <Protocol/SmmConfiguration.h>
#include <Protocol/SmmControl2.h>
@@ -34,6 +35,7 @@
#include <Library/UefiRuntimeLib.h>
#include <Library/PcdLib.h>
#include <Library/ReportStatusCodeLib.h>
+#include <Library/SafeIntLib.h>
#include "PiSmmCorePrivateData.h"
@@ -146,6 +148,41 @@ SmmCommunicationMmCommunicate2 (
IN OUT UINTN *CommSize OPTIONAL
);
+/**
+ Communicates with a registered handler.
+
+ This function provides a service to send and receive messages from a registered UEFI service.
+
+ @param[in] This The EFI_MM_COMMUNICATION3_PROTOCOL instance.
+ @param[in, out] CommBufferPhysical Physical address of the MM communication buffer, of which content must
+ start with EFI_MM_COMMUNICATE_HEADER_V3.
+ @param[in, out] CommBufferVirtual Virtual address of the MM communication buffer, of which content must
+ start with EFI_MM_COMMUNICATE_HEADER_V3.
+ @param[in, out] CommSize The size of the data buffer being passed in. On exit, the size of data
+ being returned. Zero if the handler does not wish to reply with any data.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS The message was successfully posted.
+ @retval EFI_INVALID_PARAMETER CommBufferPhysical was NULL or CommBufferVirtual was NULL.
+ @retval EFI_BAD_BUFFER_SIZE The buffer is too large for the MM implementation.
+ If this error is returned, the MessageLength field
+ in the CommBuffer header or the integer pointed by
+ CommSize, are updated to reflect the maximum payload
+ size the implementation can accommodate.
+ @retval EFI_ACCESS_DENIED The CommunicateBuffer parameter or CommSize parameter,
+ if not omitted, are in address range that cannot be
+ accessed by the MM environment.
+
+**/
+EFI_STATUS
+EFIAPI
+MmCommunicationMmCommunicate3 (
+ IN CONST EFI_MM_COMMUNICATION3_PROTOCOL *This,
+ IN OUT VOID *CommBufferPhysical,
+ IN OUT VOID *CommBufferVirtual,
+ IN OUT UINTN *CommSize OPTIONAL
+ );
+
/**
Event notification that is fired every time a gEfiSmmConfigurationProtocol installs.
@@ -275,6 +312,13 @@ EFI_MM_COMMUNICATION2_PROTOCOL mMmCommunication2 = {
SmmCommunicationMmCommunicate2
};
+//
+// PI 1.7 MM Communication Protocol 3 instance
+//
+EFI_MM_COMMUNICATION3_PROTOCOL mMmCommunication3 = {
+ MmCommunicationMmCommunicate3
+};
+
//
// SMM Core Private Data structure that contains the data shared between
// the SMM IPL and the SMM Core.
@@ -649,6 +693,148 @@ SmmCommunicationMmCommunicate2 (
CommSize);
}
+/**
+ Communicates with a registered handler.
+
+ This function provides a service to send and receive messages from a registered UEFI service.
+
+ @param[in] This The EFI_MM_COMMUNICATION3_PROTOCOL instance.
+ @param[in, out] CommBufferPhysical Physical address of the MM communication buffer, of which content must
+ start with EFI_MM_COMMUNICATE_HEADER_V3.
+ @param[in, out] CommBufferVirtual Virtual address of the MM communication buffer, of which content must
+ start with EFI_MM_COMMUNICATE_HEADER_V3.
+ @param[in, out] CommSize The size of the data buffer being passed in. On exit, the size of data
+ being returned. Zero if the handler does not wish to reply with any data.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS The message was successfully posted.
+ @retval EFI_INVALID_PARAMETER CommBufferPhysical was NULL or CommBufferVirtual was NULL.
+ @retval EFI_BAD_BUFFER_SIZE The buffer is too large for the MM implementation.
+ If this error is returned, the MessageLength field
+ in the CommBuffer header or the integer pointed by
+ CommSize, are updated to reflect the maximum payload
+ size the implementation can accommodate.
+ @retval EFI_ACCESS_DENIED The CommunicateBuffer parameter or CommSize parameter,
+ if not omitted, are in address range that cannot be
+ accessed by the MM environment.
+
+**/
+EFI_STATUS
+EFIAPI
+MmCommunicationMmCommunicate3 (
+ IN CONST EFI_MM_COMMUNICATION3_PROTOCOL *This,
+ IN OUT VOID *CommBufferPhysical,
+ IN OUT VOID *CommBufferVirtual,
+ IN OUT UINTN *CommSize OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ EFI_MM_COMMUNICATE_HEADER_V3 *CommunicateHeader;
+ BOOLEAN OldInSmm;
+ UINTN TempCommSize;
+ UINT64 LongCommSize;
+
+ //
+ // Check parameters
+ //
+ if (CommBufferPhysical == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ CommunicateHeader = (EFI_MM_COMMUNICATE_HEADER_V3 *) CommBufferPhysical;
+
+ if (CommSize == NULL) {
+ Status = SafeUint64Add (sizeof (EFI_MM_COMMUNICATE_HEADER_V3), CommunicateHeader->MessageSize, &LongCommSize);
+ if (EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = SafeUint64ToUintn (LongCommSize, &TempCommSize);
+ if (EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ } else {
+ TempCommSize = *CommSize;
+ //
+ // CommSize must hold the entire EFI_MM_COMMUNICATE_HEADER_V3
+ //
+ if (TempCommSize < sizeof (EFI_MM_COMMUNICATE_HEADER_V3)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // If not already in SMM, then generate a Software SMI
+ //
+ if (!gSmmCorePrivate->InSmm && gSmmCorePrivate->SmmEntryPointRegistered) {
+ //
+ // Put arguments for Software SMI in gSmmCorePrivate
+ //
+ gSmmCorePrivate->CommunicationBuffer = CommBufferPhysical;
+ gSmmCorePrivate->BufferSize = TempCommSize;
+
+ //
+ // Generate Software SMI
+ //
+ Status = mSmmControl2->Trigger (mSmmControl2, NULL, NULL, FALSE, 0);
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Return status from software SMI
+ //
+ if (CommSize != NULL) {
+ *CommSize = gSmmCorePrivate->BufferSize;
+ }
+ return gSmmCorePrivate->ReturnStatus;
+ }
+
+ //
+ // If we are in SMM, then the execution mode must be physical, which means that
+ // OS established virtual addresses can not be used. If SetVirtualAddressMap()
+ // has been called, then a direct invocation of the Software SMI is not allowed,
+ // so return EFI_INVALID_PARAMETER.
+ //
+ if (EfiGoneVirtual()) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // If we are not in SMM, don't allow call SmiManage() directly when SMRAM is closed or locked.
+ //
+ if ((!gSmmCorePrivate->InSmm) && (!mSmmAccess->OpenState || mSmmAccess->LockState)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Save current InSmm state and set InSmm state to TRUE
+ //
+ OldInSmm = gSmmCorePrivate->InSmm;
+ gSmmCorePrivate->InSmm = TRUE;
+
+ //
+ // Before SetVirtualAddressMap(), we are in SMM or SMRAM is open and unlocked, call SmiManage() directly.
+ //
+ TempCommSize -= sizeof (EFI_MM_COMMUNICATE_HEADER_V3);
+ Status = gSmmCorePrivate->Smst->SmiManage (
+ &CommunicateHeader->MessageGuid,
+ NULL,
+ CommunicateHeader->MessageData,
+ &TempCommSize
+ );
+ TempCommSize += sizeof (EFI_MM_COMMUNICATE_HEADER_V3);
+ if (CommSize != NULL) {
+ *CommSize = TempCommSize;
+ }
+
+ //
+ // Restore original InSmm state
+ //
+ gSmmCorePrivate->InSmm = OldInSmm;
+
+ return (Status == EFI_SUCCESS) ? EFI_SUCCESS : EFI_NOT_FOUND;
+}
+
/**
Event notification that is fired when GUIDed Event Group is signaled.
@@ -1832,6 +2018,7 @@ SmmIplEntry (
&gEfiSmmBase2ProtocolGuid, &mSmmBase2,
&gEfiSmmCommunicationProtocolGuid, &mSmmCommunication,
&gEfiMmCommunication2ProtocolGuid, &mMmCommunication2,
+ &gEfiMmCommunication3ProtocolGuid, &mMmCommunication3,
NULL
);
ASSERT_EFI_ERROR (Status);
diff --git a/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf b/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
index 6109d6b5449c..afab228cc04c 100644
--- a/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
+++ b/MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
@@ -46,11 +46,13 @@ [LibraryClasses]
DxeServicesLib
PcdLib
ReportStatusCodeLib
+ SafeIntLib
[Protocols]
gEfiSmmBase2ProtocolGuid ## PRODUCES
gEfiSmmCommunicationProtocolGuid ## PRODUCES
gEfiMmCommunication2ProtocolGuid ## PRODUCES
+ gEfiMmCommunication3ProtocolGuid ## PRODUCES
gEfiSmmAccess2ProtocolGuid ## CONSUMES
## NOTIFY
## CONSUMES
--
2.32.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79404): https://edk2.groups.io/g/devel/message/79404
Mute This Topic: https://groups.io/mt/84941524/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list