[edk2-devel] [PATCH v2 6/9] Platform/RaspberryPi: Power up sd, and tweak GPIOs
Ard Biesheuvel
ard.biesheuvel at arm.com
Mon Jan 4 16:10:22 UTC 2021
On 1/4/21 5:08 PM, Jeremy Linton wrote:
> Hi,
>
> On 12/15/20 3:00 PM, Jeremy Linton wrote:
>> It seems we should be powering up the sd cards, and possibly
>> the clocks as well to assure they are setup properly before
>> we attempt to access the controller.
>
> Looks like this hasn't been merged yet. I sent this patch as a
> replacement for 6/9 in the original set, rather than resend the entire set.
>
> Would it help if I resent the entire series?
>
Yes please,
--
Ard.
>
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
>> ---
>> Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> index 28f57438c5..e55ed63efa 100644
>> --- a/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> +++ b/Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c
>> @@ -552,6 +552,16 @@ ApplyVariables (
>> GpioPinFuncSet (37, GPIO_FSEL_ALT3);
>> GpioPinFuncSet (38, GPIO_FSEL_ALT3);
>> GpioPinFuncSet (39, GPIO_FSEL_ALT3);
>> +
>> + /*
>> + * power and clock everything by default
>> + */
>> + Status = mFwProtocol->SetPowerState (RPI_MBOX_POWER_STATE_SDHCI,
>> + TRUE, TRUE); //SD on with
>> wait
>> + Status = mFwProtocol->SetGpioConfig (RPI_EXP_GPIO_SD_VOLT,
>> + RPI_EXP_GPIO_DIR_OUT,
>> TRUE); //3.3v
>> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC2,
>> TRUE);
>> + Status = mFwProtocol->SetClockState (RPI_MBOX_CLOCK_RATE_EMMC,
>> TRUE);
>> }
>> } else {
>> DEBUG ((DEBUG_ERROR, "Model Family %d not supported...\n",
>> mModelFamily));
>>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#69595): https://edk2.groups.io/g/devel/message/69595
Mute This Topic: https://groups.io/mt/78986324/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list