[edk2-devel] [PATCH 1/3] OvmfPkg/ResetVector: move SEV specific code in a separate file
Brijesh Singh via groups.io
brijesh.singh=amd.com at groups.io
Tue Jul 27 11:16:42 UTC 2021
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The PageTables64.asm was created to provide routines to set the CR3
register for 64-bit paging. During the SEV support, it grew to include a
lot of the SEV stuff. Before adding more SEV features, let's move all
the SEV-specific routines into a separate file.
No functionality change intended.
Cc: James Bottomley <jejb at linux.ibm.com>
Cc: Min Xu <min.m.xu at intel.com>
Cc: Jiewen Yao <jiewen.yao at intel.com>
Cc: Tom Lendacky <thomas.lendacky at amd.com>
Cc: Jordan Justen <jordan.l.justen at intel.com>
Cc: Ard Biesheuvel <ardb+tianocore at kernel.org>
Cc: Laszlo Ersek <lersek at redhat.com>
Cc: Erdem Aktas <erdemaktas at google.com>
Suggested-by: Laszlo Ersek <lersek at redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh at amd.com>
---
.../Ia32/{PageTables64.asm => AmdSev.asm} | 140 -------
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 391 ------------------
OvmfPkg/ResetVector/ResetVector.nasmb | 1 +
3 files changed, 1 insertion(+), 531 deletions(-)
copy OvmfPkg/ResetVector/Ia32/{PageTables64.asm => AmdSev.asm} (71%)
diff --git a/OvmfPkg/ResetVector/Ia32/PageTables64.asm b/OvmfPkg/ResetVector/Ia32/AmdSev.asm
similarity index 71%
copy from OvmfPkg/ResetVector/Ia32/PageTables64.asm
copy to OvmfPkg/ResetVector/Ia32/AmdSev.asm
index 5fae8986d9da..b32dd3b5d656 100644
--- a/OvmfPkg/ResetVector/Ia32/PageTables64.asm
+++ b/OvmfPkg/ResetVector/Ia32/AmdSev.asm
@@ -10,33 +10,6 @@
BITS 32
-%define PAGE_PRESENT 0x01
-%define PAGE_READ_WRITE 0x02
-%define PAGE_USER_SUPERVISOR 0x04
-%define PAGE_WRITE_THROUGH 0x08
-%define PAGE_CACHE_DISABLE 0x010
-%define PAGE_ACCESSED 0x020
-%define PAGE_DIRTY 0x040
-%define PAGE_PAT 0x080
-%define PAGE_GLOBAL 0x0100
-%define PAGE_2M_MBO 0x080
-%define PAGE_2M_PAT 0x01000
-
-%define PAGE_4K_PDE_ATTR (PAGE_ACCESSED + \
- PAGE_DIRTY + \
- PAGE_READ_WRITE + \
- PAGE_PRESENT)
-
-%define PAGE_2M_PDE_ATTR (PAGE_2M_MBO + \
- PAGE_ACCESSED + \
- PAGE_DIRTY + \
- PAGE_READ_WRITE + \
- PAGE_PRESENT)
-
-%define PAGE_PDP_ATTR (PAGE_ACCESSED + \
- PAGE_READ_WRITE + \
- PAGE_PRESENT)
-
;
; SEV-ES #VC exception handler support
;
@@ -213,119 +186,6 @@ IsSevEsEnabled:
SevEsDisabled:
OneTimeCallRet IsSevEsEnabled
-;
-; Modified: EAX, EBX, ECX, EDX
-;
-SetCr3ForPageTables64:
-
- OneTimeCall CheckSevFeatures
- xor edx, edx
- test eax, eax
- jz SevNotActive
-
- ; If SEV is enabled, C-bit is always above 31
- sub eax, 32
- bts edx, eax
-
-SevNotActive:
-
- ;
- ; For OVMF, build some initial page tables at
- ; PcdOvmfSecPageTablesBase - (PcdOvmfSecPageTablesBase + 0x6000).
- ;
- ; This range should match with PcdOvmfSecPageTablesSize which is
- ; declared in the FDF files.
- ;
- ; At the end of PEI, the pages tables will be rebuilt into a
- ; more permanent location by DxeIpl.
- ;
-
- mov ecx, 6 * 0x1000 / 4
- xor eax, eax
-clearPageTablesMemoryLoop:
- mov dword[ecx * 4 + PT_ADDR (0) - 4], eax
- loop clearPageTablesMemoryLoop
-
- ;
- ; Top level Page Directory Pointers (1 * 512GB entry)
- ;
- mov dword[PT_ADDR (0)], PT_ADDR (0x1000) + PAGE_PDP_ATTR
- mov dword[PT_ADDR (4)], edx
-
- ;
- ; Next level Page Directory Pointers (4 * 1GB entries => 4GB)
- ;
- mov dword[PT_ADDR (0x1000)], PT_ADDR (0x2000) + PAGE_PDP_ATTR
- mov dword[PT_ADDR (0x1004)], edx
- mov dword[PT_ADDR (0x1008)], PT_ADDR (0x3000) + PAGE_PDP_ATTR
- mov dword[PT_ADDR (0x100C)], edx
- mov dword[PT_ADDR (0x1010)], PT_ADDR (0x4000) + PAGE_PDP_ATTR
- mov dword[PT_ADDR (0x1014)], edx
- mov dword[PT_ADDR (0x1018)], PT_ADDR (0x5000) + PAGE_PDP_ATTR
- mov dword[PT_ADDR (0x101C)], edx
-
- ;
- ; Page Table Entries (2048 * 2MB entries => 4GB)
- ;
- mov ecx, 0x800
-pageTableEntriesLoop:
- mov eax, ecx
- dec eax
- shl eax, 21
- add eax, PAGE_2M_PDE_ATTR
- mov [ecx * 8 + PT_ADDR (0x2000 - 8)], eax
- mov [(ecx * 8 + PT_ADDR (0x2000 - 8)) + 4], edx
- loop pageTableEntriesLoop
-
- OneTimeCall IsSevEsEnabled
- test eax, eax
- jz SetCr3
-
- ;
- ; The initial GHCB will live at GHCB_BASE and needs to be un-encrypted.
- ; This requires the 2MB page for this range be broken down into 512 4KB
- ; pages. All will be marked encrypted, except for the GHCB.
- ;
- mov ecx, (GHCB_BASE >> 21)
- mov eax, GHCB_PT_ADDR + PAGE_PDP_ATTR
- mov [ecx * 8 + PT_ADDR (0x2000)], eax
-
- ;
- ; Page Table Entries (512 * 4KB entries => 2MB)
- ;
- mov ecx, 512
-pageTableEntries4kLoop:
- mov eax, ecx
- dec eax
- shl eax, 12
- add eax, GHCB_BASE & 0xFFE0_0000
- add eax, PAGE_4K_PDE_ATTR
- mov [ecx * 8 + GHCB_PT_ADDR - 8], eax
- mov [(ecx * 8 + GHCB_PT_ADDR - 8) + 4], edx
- loop pageTableEntries4kLoop
-
- ;
- ; Clear the encryption bit from the GHCB entry
- ;
- mov ecx, (GHCB_BASE & 0x1F_FFFF) >> 12
- mov [ecx * 8 + GHCB_PT_ADDR + 4], strict dword 0
-
- mov ecx, GHCB_SIZE / 4
- xor eax, eax
-clearGhcbMemoryLoop:
- mov dword[ecx * 4 + GHCB_BASE - 4], eax
- loop clearGhcbMemoryLoop
-
-SetCr3:
- ;
- ; Set CR3 now that the paging structures are available
- ;
- mov eax, PT_ADDR (0)
- mov cr3, eax
-
- OneTimeCallRet SetCr3ForPageTables64
-
-;
; Start of #VC exception handling routines
;
diff --git a/OvmfPkg/ResetVector/Ia32/PageTables64.asm b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
index 5fae8986d9da..eacdb69ddb9f 100644
--- a/OvmfPkg/ResetVector/Ia32/PageTables64.asm
+++ b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
@@ -37,182 +37,6 @@ BITS 32
PAGE_READ_WRITE + \
PAGE_PRESENT)
-;
-; SEV-ES #VC exception handler support
-;
-; #VC handler local variable locations
-;
-%define VC_CPUID_RESULT_EAX 0
-%define VC_CPUID_RESULT_EBX 4
-%define VC_CPUID_RESULT_ECX 8
-%define VC_CPUID_RESULT_EDX 12
-%define VC_GHCB_MSR_EDX 16
-%define VC_GHCB_MSR_EAX 20
-%define VC_CPUID_REQUEST_REGISTER 24
-%define VC_CPUID_FUNCTION 28
-
-; #VC handler total local variable size
-;
-%define VC_VARIABLE_SIZE 32
-
-; #VC handler GHCB CPUID request/response protocol values
-;
-%define GHCB_CPUID_REQUEST 4
-%define GHCB_CPUID_RESPONSE 5
-%define GHCB_CPUID_REGISTER_SHIFT 30
-%define CPUID_INSN_LEN 2
-
-
-; Check if Secure Encrypted Virtualization (SEV) features are enabled.
-;
-; Register usage is tight in this routine, so multiple calls for the
-; same CPUID and MSR data are performed to keep things simple.
-;
-; Modified: EAX, EBX, ECX, EDX, ESP
-;
-; If SEV is enabled then EAX will be at least 32.
-; If SEV is disabled then EAX will be zero.
-;
-CheckSevFeatures:
- ; Set the first byte of the workarea to zero to communicate to the SEC
- ; phase that SEV-ES is not enabled. If SEV-ES is enabled, the CPUID
- ; instruction will trigger a #VC exception where the first byte of the
- ; workarea will be set to one or, if CPUID is not being intercepted,
- ; the MSR check below will set the first byte of the workarea to one.
- mov byte[SEV_ES_WORK_AREA], 0
-
- ;
- ; Set up exception handlers to check for SEV-ES
- ; Load temporary RAM stack based on PCDs (see SevEsIdtVmmComm for
- ; stack usage)
- ; Establish exception handlers
- ;
- mov esp, SEV_ES_VC_TOP_OF_STACK
- mov eax, ADDR_OF(Idtr)
- lidt [cs:eax]
-
- ; Check if we have a valid (0x8000_001F) CPUID leaf
- ; CPUID raises a #VC exception if running as an SEV-ES guest
- mov eax, 0x80000000
- cpuid
-
- ; This check should fail on Intel or Non SEV AMD CPUs. In future if
- ; Intel CPUs supports this CPUID leaf then we are guranteed to have exact
- ; same bit definition.
- cmp eax, 0x8000001f
- jl NoSev
-
- ; Check for SEV memory encryption feature:
- ; CPUID Fn8000_001F[EAX] - Bit 1
- ; CPUID raises a #VC exception if running as an SEV-ES guest
- mov eax, 0x8000001f
- cpuid
- bt eax, 1
- jnc NoSev
-
- ; Check if SEV memory encryption is enabled
- ; MSR_0xC0010131 - Bit 0 (SEV enabled)
- mov ecx, 0xc0010131
- rdmsr
- bt eax, 0
- jnc NoSev
-
- ; Check for SEV-ES memory encryption feature:
- ; CPUID Fn8000_001F[EAX] - Bit 3
- ; CPUID raises a #VC exception if running as an SEV-ES guest
- mov eax, 0x8000001f
- cpuid
- bt eax, 3
- jnc GetSevEncBit
-
- ; Check if SEV-ES is enabled
- ; MSR_0xC0010131 - Bit 1 (SEV-ES enabled)
- mov ecx, 0xc0010131
- rdmsr
- bt eax, 1
- jnc GetSevEncBit
-
- ; Set the first byte of the workarea to one to communicate to the SEC
- ; phase that SEV-ES is enabled.
- mov byte[SEV_ES_WORK_AREA], 1
-
-GetSevEncBit:
- ; Get pte bit position to enable memory encryption
- ; CPUID Fn8000_001F[EBX] - Bits 5:0
- ;
- and ebx, 0x3f
- mov eax, ebx
-
- ; The encryption bit position is always above 31
- sub ebx, 32
- jns SevSaveMask
-
- ; Encryption bit was reported as 31 or below, enter a HLT loop
-SevEncBitLowHlt:
- cli
- hlt
- jmp SevEncBitLowHlt
-
-SevSaveMask:
- xor edx, edx
- bts edx, ebx
-
- mov dword[SEV_ES_WORK_AREA_ENC_MASK], 0
- mov dword[SEV_ES_WORK_AREA_ENC_MASK + 4], edx
- jmp SevExit
-
-NoSev:
- ;
- ; Perform an SEV-ES sanity check by seeing if a #VC exception occurred.
- ;
- cmp byte[SEV_ES_WORK_AREA], 0
- jz NoSevPass
-
- ;
- ; A #VC was received, yet CPUID indicates no SEV-ES support, something
- ; isn't right.
- ;
-NoSevEsVcHlt:
- cli
- hlt
- jmp NoSevEsVcHlt
-
-NoSevPass:
- xor eax, eax
-
-SevExit:
- ;
- ; Clear exception handlers and stack
- ;
- push eax
- mov eax, ADDR_OF(IdtrClear)
- lidt [cs:eax]
- pop eax
- mov esp, 0
-
- OneTimeCallRet CheckSevFeatures
-
-; Check if Secure Encrypted Virtualization - Encrypted State (SEV-ES) feature
-; is enabled.
-;
-; Modified: EAX
-;
-; If SEV-ES is enabled then EAX will be non-zero.
-; If SEV-ES is disabled then EAX will be zero.
-;
-IsSevEsEnabled:
- xor eax, eax
-
- ; During CheckSevFeatures, the SEV_ES_WORK_AREA was set to 1 if
- ; SEV-ES is enabled.
- cmp byte[SEV_ES_WORK_AREA], 1
- jne SevEsDisabled
-
- mov eax, 1
-
-SevEsDisabled:
- OneTimeCallRet IsSevEsEnabled
-
;
; Modified: EAX, EBX, ECX, EDX
;
@@ -324,218 +148,3 @@ SetCr3:
mov cr3, eax
OneTimeCallRet SetCr3ForPageTables64
-
-;
-; Start of #VC exception handling routines
-;
-
-SevEsIdtNotCpuid:
- ;
- ; Use VMGEXIT to request termination.
- ; 1 - #VC was not for CPUID
- ;
- mov eax, 1
- jmp SevEsIdtTerminate
-
-SevEsIdtNoCpuidResponse:
- ;
- ; Use VMGEXIT to request termination.
- ; 2 - GHCB_CPUID_RESPONSE not received
- ;
- mov eax, 2
-
-SevEsIdtTerminate:
- ;
- ; Use VMGEXIT to request termination. At this point the reason code is
- ; located in EAX, so shift it left 16 bits to the proper location.
- ;
- ; EAX[11:0] => 0x100 - request termination
- ; EAX[15:12] => 0x1 - OVMF
- ; EAX[23:16] => 0xXX - REASON CODE
- ;
- shl eax, 16
- or eax, 0x1100
- xor edx, edx
- mov ecx, 0xc0010130
- wrmsr
- ;
- ; Issue VMGEXIT - NASM doesn't support the vmmcall instruction in 32-bit
- ; mode, so work around this by temporarily switching to 64-bit mode.
- ;
-BITS 64
- rep vmmcall
-BITS 32
-
- ;
- ; We shouldn't come back from the VMGEXIT, but if we do, just loop.
- ;
-SevEsIdtHlt:
- hlt
- jmp SevEsIdtHlt
- iret
-
- ;
- ; Total stack usage for the #VC handler is 44 bytes:
- ; - 12 bytes for the exception IRET (after popping error code)
- ; - 32 bytes for the local variables.
- ;
-SevEsIdtVmmComm:
- ;
- ; If we're here, then we are an SEV-ES guest and this
- ; was triggered by a CPUID instruction
- ;
- ; Set the first byte of the workarea to one to communicate that
- ; a #VC was taken.
- mov byte[SEV_ES_WORK_AREA], 1
-
- pop ecx ; Error code
- cmp ecx, 0x72 ; Be sure it was CPUID
- jne SevEsIdtNotCpuid
-
- ; Set up local variable room on the stack
- ; CPUID function : + 28
- ; CPUID request register : + 24
- ; GHCB MSR (EAX) : + 20
- ; GHCB MSR (EDX) : + 16
- ; CPUID result (EDX) : + 12
- ; CPUID result (ECX) : + 8
- ; CPUID result (EBX) : + 4
- ; CPUID result (EAX) : + 0
- sub esp, VC_VARIABLE_SIZE
-
- ; Save the CPUID function being requested
- mov [esp + VC_CPUID_FUNCTION], eax
-
- ; The GHCB CPUID protocol uses the following mapping to request
- ; a specific register:
- ; 0 => EAX, 1 => EBX, 2 => ECX, 3 => EDX
- ;
- ; Set EAX as the first register to request. This will also be used as a
- ; loop variable to request all register values (EAX to EDX).
- xor eax, eax
- mov [esp + VC_CPUID_REQUEST_REGISTER], eax
-
- ; Save current GHCB MSR value
- mov ecx, 0xc0010130
- rdmsr
- mov [esp + VC_GHCB_MSR_EAX], eax
- mov [esp + VC_GHCB_MSR_EDX], edx
-
-NextReg:
- ;
- ; Setup GHCB MSR
- ; GHCB_MSR[63:32] = CPUID function
- ; GHCB_MSR[31:30] = CPUID register
- ; GHCB_MSR[11:0] = CPUID request protocol
- ;
- mov eax, [esp + VC_CPUID_REQUEST_REGISTER]
- cmp eax, 4
- jge VmmDone
-
- shl eax, GHCB_CPUID_REGISTER_SHIFT
- or eax, GHCB_CPUID_REQUEST
- mov edx, [esp + VC_CPUID_FUNCTION]
- mov ecx, 0xc0010130
- wrmsr
-
- ;
- ; Issue VMGEXIT - NASM doesn't support the vmmcall instruction in 32-bit
- ; mode, so work around this by temporarily switching to 64-bit mode.
- ;
-BITS 64
- rep vmmcall
-BITS 32
-
- ;
- ; Read GHCB MSR
- ; GHCB_MSR[63:32] = CPUID register value
- ; GHCB_MSR[31:30] = CPUID register
- ; GHCB_MSR[11:0] = CPUID response protocol
- ;
- mov ecx, 0xc0010130
- rdmsr
- mov ecx, eax
- and ecx, 0xfff
- cmp ecx, GHCB_CPUID_RESPONSE
- jne SevEsIdtNoCpuidResponse
-
- ; Save returned value
- shr eax, GHCB_CPUID_REGISTER_SHIFT
- mov [esp + eax * 4], edx
-
- ; Next register
- inc word [esp + VC_CPUID_REQUEST_REGISTER]
-
- jmp NextReg
-
-VmmDone:
- ;
- ; At this point we have all CPUID register values. Restore the GHCB MSR,
- ; set the return register values and return.
- ;
- mov eax, [esp + VC_GHCB_MSR_EAX]
- mov edx, [esp + VC_GHCB_MSR_EDX]
- mov ecx, 0xc0010130
- wrmsr
-
- mov eax, [esp + VC_CPUID_RESULT_EAX]
- mov ebx, [esp + VC_CPUID_RESULT_EBX]
- mov ecx, [esp + VC_CPUID_RESULT_ECX]
- mov edx, [esp + VC_CPUID_RESULT_EDX]
-
- add esp, VC_VARIABLE_SIZE
-
- ; Update the EIP value to skip over the now handled CPUID instruction
- ; (the CPUID instruction has a length of 2)
- add word [esp], CPUID_INSN_LEN
- iret
-
-ALIGN 2
-
-Idtr:
- dw IDT_END - IDT_BASE - 1 ; Limit
- dd ADDR_OF(IDT_BASE) ; Base
-
-IdtrClear:
- dw 0 ; Limit
- dd 0 ; Base
-
-ALIGN 16
-
-;
-; The Interrupt Descriptor Table (IDT)
-; This will be used to determine if SEV-ES is enabled. Upon execution
-; of the CPUID instruction, a VMM Communication Exception will occur.
-; This will tell us if SEV-ES is enabled. We can use the current value
-; of the GHCB MSR to determine the SEV attributes.
-;
-IDT_BASE:
-;
-; Vectors 0 - 28 (No handlers)
-;
-%rep 29
- dw 0 ; Offset low bits 15..0
- dw 0x10 ; Selector
- db 0 ; Reserved
- db 0x8E ; Gate Type (IA32_IDT_GATE_TYPE_INTERRUPT_32)
- dw 0 ; Offset high bits 31..16
-%endrep
-;
-; Vector 29 (VMM Communication Exception)
-;
- dw (ADDR_OF(SevEsIdtVmmComm) & 0xffff) ; Offset low bits 15..0
- dw 0x10 ; Selector
- db 0 ; Reserved
- db 0x8E ; Gate Type (IA32_IDT_GATE_TYPE_INTERRUPT_32)
- dw (ADDR_OF(SevEsIdtVmmComm) >> 16) ; Offset high bits 31..16
-;
-; Vectors 30 - 31 (No handlers)
-;
-%rep 2
- dw 0 ; Offset low bits 15..0
- dw 0x10 ; Selector
- db 0 ; Reserved
- db 0x8E ; Gate Type (IA32_IDT_GATE_TYPE_INTERRUPT_32)
- dw 0 ; Offset high bits 31..16
-%endrep
-IDT_END:
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb b/OvmfPkg/ResetVector/ResetVector.nasmb
index 5fbacaed5f9d..8a3269cfc212 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -77,6 +77,7 @@
%define SEV_ES_WORK_AREA_ENC_MASK (FixedPcdGet32 (PcdSevEsWorkAreaBase) + 16)
%define SEV_ES_VC_TOP_OF_STACK (FixedPcdGet32 (PcdOvmfSecPeiTempRamBase) + FixedPcdGet32 (PcdOvmfSecPeiTempRamSize))
%include "Ia32/Flat32ToFlat64.asm"
+%include "Ia32/AmdSev.asm"
%include "Ia32/PageTables64.asm"
%endif
--
2.17.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#78211): https://edk2.groups.io/g/devel/message/78211
Mute This Topic: https://groups.io/mt/84479271/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list