[edk2-devel] [Patch V3 2/9] MdeModulePkg: Add new structure for the PCI Root Bridge Info Hob
Zhiguang Liu
zhiguang.liu at intel.com
Fri Jun 4 09:42:20 UTC 2021
Cc: Michael D Kinney <michael.d.kinney at intel.com>
Cc: Liming Gao <gaoliming at byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang at intel.com>
Cc: Hao A Wu <hao.a.wu at intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu at intel.com>
---
MdeModulePkg/Include/UniversalPayload/PciRootBridges.h | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MdeModulePkg/MdeModulePkg.dec | 6 ++++++
2 files changed, 95 insertions(+)
diff --git a/MdeModulePkg/Include/UniversalPayload/PciRootBridges.h b/MdeModulePkg/Include/UniversalPayload/PciRootBridges.h
new file mode 100644
index 0000000000..72e8331ede
--- /dev/null
+++ b/MdeModulePkg/Include/UniversalPayload/PciRootBridges.h
@@ -0,0 +1,89 @@
+/** @file
+ This file defines the structure for the PCI Root Bridges.
+
+ Copyright (c) 2021, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __PLD_PCI_ROOT_BRIDGES_H__
+#define __PLD_PCI_ROOT_BRIDGES_H__
+
+#include <UniversalPayload/UniversalPayload.h>
+
+#pragma pack(1)
+
+//
+// (Base > Limit) indicates an aperture is not available.
+//
+typedef struct {
+ //
+ // Base and Limit are the device address instead of host address when
+ // Translation is not zero
+ //
+ UINT64 Base;
+ UINT64 Limit;
+ //
+ // According to UEFI 2.7, Device Address = Host Address + Translation,
+ // so Translation = Device Address - Host Address.
+ // On platforms where Translation is not zero, the subtraction is probably to
+ // be performed with UINT64 wrap-around semantics, for we may translate an
+ // above-4G host address into a below-4G device address for legacy PCIe device
+ // compatibility.
+ //
+ // NOTE: The alignment of Translation is required to be larger than any BAR
+ // alignment in the same root bridge, so that the same alignment can be
+ // applied to both device address and host address, which simplifies the
+ // situation and makes the current resource allocation code in generic PCI
+ // host bridge driver still work.
+ //
+ UINT64 Translation;
+} PLD_PCI_ROOT_BRIDGE_APERTURE;
+
+///
+/// Payload PCI Root Bridge Information HOB
+///
+typedef struct {
+ UINT32 Segment; ///< Segment number.
+ UINT64 Supports; ///< Supported attributes.
+ ///< Refer to EFI_PCI_ATTRIBUTE_xxx used by GetAttributes()
+ ///< and SetAttributes() in EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ UINT64 Attributes; ///< Initial attributes.
+ ///< Refer to EFI_PCI_ATTRIBUTE_xxx used by GetAttributes()
+ ///< and SetAttributes() in EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
+ BOOLEAN DmaAbove4G; ///< DMA above 4GB memory.
+ ///< Set to TRUE when root bridge supports DMA above 4GB memory.
+ BOOLEAN NoExtendedConfigSpace; ///< When FALSE, the root bridge supports
+ ///< Extended (4096-byte) Configuration Space.
+ ///< When TRUE, the root bridge supports
+ ///< 256-byte Configuration Space only.
+ UINT64 AllocationAttributes; ///< Allocation attributes.
+ ///< Refer to EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM and
+ ///< EFI_PCI_HOST_BRIDGE_MEM64_DECODE used by GetAllocAttributes()
+ ///< in EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL.
+ PLD_PCI_ROOT_BRIDGE_APERTURE Bus; ///< Bus aperture which can be used by the root bridge.
+ PLD_PCI_ROOT_BRIDGE_APERTURE Io; ///< IO aperture which can be used by the root bridge.
+ PLD_PCI_ROOT_BRIDGE_APERTURE Mem; ///< MMIO aperture below 4GB which can be used by the root bridge.
+ PLD_PCI_ROOT_BRIDGE_APERTURE MemAbove4G; ///< MMIO aperture above 4GB which can be used by the root bridge.
+ PLD_PCI_ROOT_BRIDGE_APERTURE PMem; ///< Prefetchable MMIO aperture below 4GB which can be used by the root bridge.
+ PLD_PCI_ROOT_BRIDGE_APERTURE PMemAbove4G; ///< Prefetchable MMIO aperture above 4GB which can be used by the root bridge.
+ UINT32 HID; ///< PnP hardware ID of the root bridge. This value must match the corresponding
+ ///< _HID in the ACPI name space.
+ UINT32 UID; ///< Unique ID that is required by ACPI if two devices have the same _HID.
+ ///< This value must also match the corresponding _UID/_HID pair in the ACPI name space.
+} PLD_PCI_ROOT_BRIDGE;
+
+typedef struct {
+ PLD_GENERIC_HEADER PldHeader;
+ BOOLEAN ResourceAssigned;
+ UINT8 Count;
+ PLD_PCI_ROOT_BRIDGE RootBridge[0];
+} PLD_PCI_ROOT_BRIDGES;
+
+#pragma pack()
+
+#define PLD_PCI_ROOT_BRIDGES_REVISION 1
+
+extern GUID gPldPciRootBridgeInfoGuid;
+
+#endif // __PLD_PCI_ROOT_BRIDGES_H__
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 8d38383915..671d0f33c8 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -404,6 +404,12 @@
## Include/Guid/MigratedFvInfo.h
gEdkiiMigratedFvInfoGuid = { 0xc1ab12f7, 0x74aa, 0x408d, { 0xa2, 0xf4, 0xc6, 0xce, 0xfd, 0x17, 0x98, 0x71 } }
+ #
+ # GUID defined in UniversalPayload
+ #
+ ## Include/UniversalPayload/PciRootBridges.h
+ gPldPciRootBridgeInfoGuid = { 0xec4ebacb, 0x2638, 0x416e, { 0xbe, 0x80, 0xe5, 0xfa, 0x4b, 0x51, 0x19, 0x01 }}
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
--
2.30.0.windows.2
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#76057): https://edk2.groups.io/g/devel/message/76057
Mute This Topic: https://groups.io/mt/83304944/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list