Re: [edk2-devel] 回复: [RESEND PATCH v2] BaseTools: Add support for RISCV GOT/PLT relocations
Sunil V L
sunilvl at ventanamicro.com
Thu Jun 17 04:46:26 UTC 2021
Hi Liming,
Thank you very much for the review.
On Thu, Jun 17, 2021 at 09:43:21AM +0800, gaoliming wrote:
> Sunil:
> I add my comments below.
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: Sunil V L <sunilvl at ventanamicro.com>
> > 发送时间: 2021年6月11日 22:05
> > 收件人: devel at edk2.groups.io
> > 抄送: Sunil V L <sunilvl at ventanamicro.com>; Abner Chang
> > <abner.chang at hpe.com>; Daniel Schaefer <daniel.schaefer at hpe.com>; Bob
> > Feng <bob.c.feng at intel.com>; Liming Gao <gaoliming at byosoft.com.cn>;
> > Yuwei Chen <yuwei.chen at intel.com>; Heinrich Schuchardt
> > <xypron.glpk at gmx.de>
> > 主题: [RESEND PATCH v2] BaseTools: Add support for RISCV GOT/PLT
> > relocations
> >
> > Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3096
> >
> > This patch adds support for R_RISCV_CALL_PLT and R_RISCV_GOT_HI20
> > relocations generated by PIE enabled compiler. This also needed
> > changes to R_RISCV_32 and R_RISCV_64 relocations as explained in
> > https://github.com/riscv/riscv-gnu-toolchain/issues/905#issuecomment-8466
> > 82710
> >
> > Changes in v2:
> > - Addressed Daniel's comment on formatting
> >
> > Testing:
> > 1) Debian GCC 8.3.0 and booted sifive_u and QMEU virt models.
> > 2) Debian 10.2.0 and booted QEMU virt model.
> > 3) riscv-gnu-tool chain 9.2 and booted QEMU virt model.
> >
> > Signed-off-by: Sunil V L <sunilvl at ventanamicro.com>
> >
> > Acked-by: Abner Chang <abner.chang at hpe.com>
> > Reviewed-by: Daniel Schaefer <daniel.schaefer at hpe.com>
> > Tested-by: <daniel.schaefer at hpe.com>
>
> Tested-By format is invalid. Its format is same Reviewed-by.
Sure. Will fix it.
>
> >
> > Cc: Bob Feng <bob.c.feng at intel.com>
> > Cc: Liming Gao <gaoliming at byosoft.com.cn>
> > Cc: Yuwei Chen <yuwei.chen at intel.com>
> > Cc: Heinrich Schuchardt <xypron.glpk at gmx.de>
> > ---
> > BaseTools/Source/C/GenFw/Elf64Convert.c | 44
> > +++++++++++++++++++++----
> > 1 file changed, 38 insertions(+), 6 deletions(-)
> >
> > diff --git a/BaseTools/Source/C/GenFw/Elf64Convert.c
> > b/BaseTools/Source/C/GenFw/Elf64Convert.c
> > index d097db8632..d684318269 100644
> > --- a/BaseTools/Source/C/GenFw/Elf64Convert.c
> > +++ b/BaseTools/Source/C/GenFw/Elf64Convert.c
> > @@ -129,6 +129,8 @@ STATIC UINT32 mDebugOffset;
> > STATIC UINT8 *mRiscVPass1Targ = NULL;
> >
> > STATIC Elf_Shdr *mRiscVPass1Sym = NULL;
> >
> > STATIC Elf64_Half mRiscVPass1SymSecIndex = 0;
> >
> > +STATIC INT32 mRiscVPass1Offset;
> >
> > +STATIC INT32 mRiscVPass1GotFixup;
> >
> >
> >
> > //
> >
> > // Initialization Function
> >
> > @@ -479,11 +481,11 @@ WriteSectionRiscV64 (
> > break;
> >
> >
> >
> > case R_RISCV_32:
> >
> > - *(UINT32 *)Targ = (UINT32)((UINT64)(*(UINT32 *)Targ) -
> > SymShdr->sh_addr + mCoffSectionsOffset[Sym->st_shndx]);
> >
> > + *(UINT64 *)Targ = Sym->st_value + Rel->r_addend;
> >
> > break;
> >
> >
> >
> > case R_RISCV_64:
> >
> > - *(UINT64 *)Targ = *(UINT64 *)Targ - SymShdr->sh_addr +
> > mCoffSectionsOffset[Sym->st_shndx];
> >
> > + *(UINT64 *)Targ = Sym->st_value + Rel->r_addend;
> >
> > break;
> >
> >
> >
> > case R_RISCV_HI20:
> >
> > @@ -533,6 +535,18 @@ WriteSectionRiscV64 (
> > mRiscVPass1SymSecIndex = 0;
> >
> > break;
> >
> >
> >
> > + case R_RISCV_GOT_HI20:
> >
> > + Value = (Sym->st_value - Rel->r_offset);
> >
> > + mRiscVPass1Offset = RV_X(Value, 0, 12);
> >
> > + Value = RV_X(Value, 12, 20);
> >
> > + *(UINT32 *)Targ = (Value << 12) | (RV_X(*(UINT32*)Targ, 0, 12));
> >
> > +
> >
> > + mRiscVPass1Targ = Targ;
> >
> > + mRiscVPass1Sym = SymShdr;
> >
> > + mRiscVPass1SymSecIndex = Sym->st_shndx;
> >
> > + mRiscVPass1GotFixup = 1;
> >
> > + break;
> >
> > +
> >
> > case R_RISCV_PCREL_HI20:
> >
> > mRiscVPass1Targ = Targ;
> >
> > mRiscVPass1Sym = SymShdr;
> >
> > @@ -545,11 +559,17 @@ WriteSectionRiscV64 (
> > if (mRiscVPass1Targ != NULL && mRiscVPass1Sym != NULL &&
> > mRiscVPass1SymSecIndex != 0) {
> >
> > int i;
> >
> > Value2 = (UINT32)(RV_X(*(UINT32 *)mRiscVPass1Targ, 12, 20));
> >
> > - Value = (UINT32)(RV_X(*(UINT32 *)Targ, 20, 12));
> >
> > - if(Value & (RISCV_IMM_REACH/2)) {
> >
> > - Value |= ~(RISCV_IMM_REACH-1);
> >
> > +
> >
> > + if(mRiscVPass1GotFixup) {
> >
> > + Value = (UINT32)(mRiscVPass1Offset);
> >
> > + } else {
> >
> > + Value = (UINT32)(RV_X(*(UINT32 *)Targ, 20, 12));
> >
> > + if(Value & (RISCV_IMM_REACH/2)) {
> >
> > + Value |= ~(RISCV_IMM_REACH-1);
> >
> > + }
> >
> > }
> >
> > Value = Value - (UINT32)mRiscVPass1Sym->sh_addr +
> > mCoffSectionsOffset[mRiscVPass1SymSecIndex];
> >
> > +
> >
> > if(-2048 > (INT32)Value) {
> >
> > i = (((INT32)Value * -1) / 4096);
> >
> > Value2 -= i;
> >
> > @@ -569,12 +589,21 @@ WriteSectionRiscV64 (
> > }
> >
> > }
> >
> >
> >
> > - *(UINT32 *)Targ = (RV_X(Value, 0, 12) << 20) |
> (RV_X(*(UINT32*)Targ,
> > 0, 20));
> >
> > + if(mRiscVPass1GotFixup) {
> >
> > + *(UINT32 *)Targ = (RV_X((UINT32)Value, 0, 12) << 20)
> >
> > + | (RV_X(*(UINT32*)Targ, 0, 20));
> >
> > + /* Convert LD instruction to ADDI */
> >
> > + *(UINT32 *)Targ = ((*(UINT32 *)Targ & ~0x707f) | 0x13);
> >
> Can you add the comments for the hard value 0x707f and 0x13?
Sure. Will add.
Thanks
Sunil
>
> Thanks
> Liming
>
> > + } else {
> >
> > + *(UINT32 *)Targ = (RV_X(Value, 0, 12) << 20) |
> > (RV_X(*(UINT32*)Targ, 0, 20));
> >
> > + }
> >
> > *(UINT32 *)mRiscVPass1Targ = (RV_X(Value2, 0, 20)<<12) |
> > (RV_X(*(UINT32 *)mRiscVPass1Targ, 0, 12));
> >
> > }
> >
> > mRiscVPass1Sym = NULL;
> >
> > mRiscVPass1Targ = NULL;
> >
> > mRiscVPass1SymSecIndex = 0;
> >
> > + mRiscVPass1Offset = 0;
> >
> > + mRiscVPass1GotFixup = 0;
> >
> > break;
> >
> >
> >
> > case R_RISCV_ADD64:
> >
> > @@ -586,6 +615,7 @@ WriteSectionRiscV64 (
> > case R_RISCV_GPREL_I:
> >
> > case R_RISCV_GPREL_S:
> >
> > case R_RISCV_CALL:
> >
> > + case R_RISCV_CALL_PLT:
> >
> > case R_RISCV_RVC_BRANCH:
> >
> > case R_RISCV_RVC_JUMP:
> >
> > case R_RISCV_RELAX:
> >
> > @@ -1528,6 +1558,7 @@ WriteRelocations64 (
> > case R_RISCV_GPREL_I:
> >
> > case R_RISCV_GPREL_S:
> >
> > case R_RISCV_CALL:
> >
> > + case R_RISCV_CALL_PLT:
> >
> > case R_RISCV_RVC_BRANCH:
> >
> > case R_RISCV_RVC_JUMP:
> >
> > case R_RISCV_RELAX:
> >
> > @@ -1537,6 +1568,7 @@ WriteRelocations64 (
> > case R_RISCV_SET16:
> >
> > case R_RISCV_SET32:
> >
> > case R_RISCV_PCREL_HI20:
> >
> > + case R_RISCV_GOT_HI20:
> >
> > case R_RISCV_PCREL_LO12_I:
> >
> > break;
> >
> >
> >
> > --
> > 2.25.1
>
>
>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#76647): https://edk2.groups.io/g/devel/message/76647
Mute This Topic: https://groups.io/mt/83595789/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list