[edk2-devel] [PATCH 4/6] NetworkPkg/IScsiDxe: support multiple hash algorithms for CHAP

Laszlo Ersek lersek at redhat.com
Tue Jun 22 15:57:16 UTC 2021


On 06/11/21 13:54, Rabeda, Maciej wrote:
> Laszlo,
> 
> Comments inline.
> 
> On 08-Jun-21 15:06, Laszlo Ersek wrote:
>> Introduce the "mChapHash" table, containing the hash algorithms supported
>> for CHAP. Hash algos listed at the beginning of the table are
>> preferred by
>> the initiator.
>>
>> In ISCSI_CHAP_STEP_ONE, send such a CHAP_A value that is the
>> comma-separated, ordered list of algorithm identifiers from "mChapHash".
>> Pre-format this value string at driver startup, in the new function
>> IScsiCHAPInitHashList().
>>
>> (In IScsiCHAPInitHashList(), also enforce that every hash algo's digest
>> size fit into ISCSI_CHAP_MAX_DIGEST_SIZE, as the latter controls the
>> digest, outgoing challenge, and hex *allocations*.)
>>
>> In ISCSI_CHAP_STEP_TWO, allow the target to select one of the offered
>> hash
>> algorithms, and remember the selection for the later steps. For
>> ISCSI_CHAP_STEP_THREE, hash the challenge from the target with the
>> selected hash algo.
>>
>> In ISCSI_CHAP_STEP_THREE, send the correctly sized digest to the target.
>> If the initiator wants mutual authentication, then generate a challenge
>> with as many bytes as the target's digest will have, in
>> ISCSI_CHAP_STEP_FOUR.
>>
>> In ISCSI_CHAP_STEP_FOUR (i.e., when mutual authentication is required by
>> the initiator), verify the target's response (digest) with the selected
>> algorithm.
>>
>> Clear the selected hash algorithm before every login (remember that in
>> IScsiDxe, every login is a leading login).
>>
>> There is no peer-observable change from this patch, as it only reworks
>> the
>> current MD5 support into the new internal representation.
>>
>> Cc: Jiaxin Wu <jiaxin.wu at intel.com>
>> Cc: Maciej Rabeda <maciej.rabeda at linux.intel.com>
>> Cc: Philippe Mathieu-Daudé <philmd at redhat.com>
>> Cc: Siyuan Fu <siyuan.fu at intel.com>
>> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
>> Signed-off-by: Laszlo Ersek <lersek at redhat.com>
>> ---
>>   NetworkPkg/IScsiDxe/IScsiCHAP.h   |  55 +++++++
>>   NetworkPkg/IScsiDxe/IScsiCHAP.c   | 158 +++++++++++++++++---
>>   NetworkPkg/IScsiDxe/IScsiDriver.c |   2 +
>>   NetworkPkg/IScsiDxe/IScsiProto.c  |   3 +
>>   4 files changed, 195 insertions(+), 23 deletions(-)
>>
>> diff --git a/NetworkPkg/IScsiDxe/IScsiCHAP.h
>> b/NetworkPkg/IScsiDxe/IScsiCHAP.h
>> index b8811b7580f0..1e5cc0b287ed 100644
>> --- a/NetworkPkg/IScsiDxe/IScsiCHAP.h
>> +++ b/NetworkPkg/IScsiDxe/IScsiCHAP.h
>> @@ -31,47 +31,91 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>>     #define ISCSI_CHAP_STEP_ONE                       1
>>   #define ISCSI_CHAP_STEP_TWO                       2
>>   #define ISCSI_CHAP_STEP_THREE                     3
>>   #define ISCSI_CHAP_STEP_FOUR                      4
>>       #pragma pack(1)
>>     typedef struct _ISCSI_CHAP_AUTH_CONFIG_NVDATA {
>>     UINT8 CHAPType;
>>     CHAR8 CHAPName[ISCSI_CHAP_NAME_STORAGE];
>>     CHAR8 CHAPSecret[ISCSI_CHAP_SECRET_STORAGE];
>>     CHAR8 ReverseCHAPName[ISCSI_CHAP_NAME_STORAGE];
>>     CHAR8 ReverseCHAPSecret[ISCSI_CHAP_SECRET_STORAGE];
>>   } ISCSI_CHAP_AUTH_CONFIG_NVDATA;
>>     #pragma pack()
>>   +//
>> +// Typedefs for collecting sets of hash APIs from BaseCryptLib.
>> +//
>> +typedef
>> +UINTN
>> +(EFIAPI *CHAP_HASH_GET_CONTEXT_SIZE) (
>> +  VOID
>> +  );
>> +
>> +typedef
>> +BOOLEAN
>> +(EFIAPI *CHAP_HASH_INIT) (
>> +  OUT VOID *Context
>> +  );
>> +
>> +typedef
>> +BOOLEAN
>> +(EFIAPI *CHAP_HASH_UPDATE) (
>> +  IN OUT VOID       *Context,
>> +  IN     CONST VOID *Data,
>> +  IN     UINTN      DataSize
>> +  );
>> +
>> +typedef
>> +BOOLEAN
>> +(EFIAPI *CHAP_HASH_FINAL) (
>> +  IN OUT VOID  *Context,
>> +  OUT    UINT8 *HashValue
>> +  );
>> +
>> +typedef struct {
>> +  UINT8                      Algorithm;      //
>> ISCSI_CHAP_ALGORITHM_*, CHAP_A
> Any chance to define an enum type for Algorithm? IMHO it brings more
> meaning to that number and limits the set of values it is expected to have.

I picked UINT8 intentionally; I wanted to stay close to the definition at

https://www.iana.org/assignments/ppp-numbers/ppp-numbers.xhtml#ppp-numbers-9

which says, "A one octet field". (Hence the reference to "CHAP_A" in the
comment as well.)

If we want an enum here, then I need to prepend a patch, for first
replacing the existent ISCSI_CHAP_ALGORITHM_MD5 macro with an enum type
/ constant.

I still like UINT8 for this, but if you strongly prefer the enum, I can
certainly do it. Please advise :)


>> +  UINT32                     DigestSize;
>> +  CHAP_HASH_GET_CONTEXT_SIZE GetContextSize;
>> +  CHAP_HASH_INIT             Init;
>> +  CHAP_HASH_UPDATE           Update;
>> +  CHAP_HASH_FINAL            Final;
>> +} CHAP_HASH;
>> +
>>   ///
>>   /// ISCSI CHAP Authentication Data
>>   ///
>>   typedef struct _ISCSI_CHAP_AUTH_DATA {
>>     ISCSI_CHAP_AUTH_CONFIG_NVDATA *AuthConfig;
>>     UINT32                        InIdentifier;
>>     UINT8                         InChallenge[1024];
>>     UINT32                        InChallengeLength;
>>     //
>> +  // The hash algorithm (CHAP_A) that the target selects in
>> +  // ISCSI_CHAP_STEP_TWO.
>> +  //
>> +  CONST CHAP_HASH               *Hash;
>> +  //
>>     // Calculated CHAP Response (CHAP_R) value.
>>     //
>>     UINT8                        
>> CHAPResponse[ISCSI_CHAP_MAX_DIGEST_SIZE];
>>       //
>>     // Auth-data to be sent out for mutual authentication.
>>     //
>>     // While the challenge size is technically independent of the hashing
>>     // algorithm, it is good practice to avoid hashing *fewer bytes*
>> than the
>>     // digest size. In other words, it's good practice to feed *at
>> least as many
>>     // bytes* to the hashing algorithm as the hashing algorithm will
>> output.
>>     //
>>     UINT32                        OutIdentifier;
>>     UINT8                        
>> OutChallenge[ISCSI_CHAP_MAX_DIGEST_SIZE];
>>   } ISCSI_CHAP_AUTH_DATA;
>>     /**
>>     This function checks the received iSCSI Login Response during the
>> security
>>     negotiation stage.
>> @@ -92,20 +136,31 @@ IScsiCHAPOnRspReceived (
>>     This function fills the CHAP authentication information into the
>> login PDU
>>     during the security negotiation stage in the iSCSI connection login.
>>       @param[in]       Conn        The iSCSI connection.
>>     @param[in, out]  Pdu         The PDU to send out.
>>       @retval EFI_SUCCESS           All check passed and the
>> phase-related CHAP
>>                                   authentication info is filled into
>> the iSCSI
>>                                   PDU.
>>     @retval EFI_OUT_OF_RESOURCES  Failed to allocate memory.
>>     @retval EFI_PROTOCOL_ERROR    Some kind of protocol error occurred.
>>     **/
>>   EFI_STATUS
>>   IScsiCHAPToSendReq (
>>     IN      ISCSI_CONNECTION  *Conn,
>>     IN OUT  NET_BUF           *Pdu
>>     );
>>   +/**
>> +  Initialize the CHAP_A=<A1,A2...> *value* string for the entire
>> driver, to be
>> +  sent by the initiator in ISCSI_CHAP_STEP_ONE.
>> +
>> +  This function sanity-checks the internal table of supported CHAP
>> hashing
>> +  algorithms, as well.
>> +**/
>> +VOID
>> +IScsiCHAPInitHashList (
>> +  VOID
>> +  );
>>   #endif
>> diff --git a/NetworkPkg/IScsiDxe/IScsiCHAP.c
>> b/NetworkPkg/IScsiDxe/IScsiCHAP.c
>> index 744824e63d23..f02ada6444ce 100644
>> --- a/NetworkPkg/IScsiDxe/IScsiCHAP.c
>> +++ b/NetworkPkg/IScsiDxe/IScsiCHAP.c
>> @@ -1,148 +1,194 @@
>>   /** @file
>>     This file is for Challenge-Handshake Authentication Protocol (CHAP)
>>     Configuration.
>>     Copyright (c) 2004 - 2018, Intel Corporation. All rights
>> reserved.<BR>
>>   SPDX-License-Identifier: BSD-2-Clause-Patent
>>     **/
>>     #include "IScsiImpl.h"
>>   +//
>> +// Supported CHAP hash algorithms, mapped to sets of BaseCryptLib
>> APIs and
>> +// macros. CHAP_HASH structures at lower subscripts in the array are
>> preferred
>> +// by the initiator.
>> +//
>> +STATIC CONST CHAP_HASH mChapHash[] = {
>> +  {
>> +    ISCSI_CHAP_ALGORITHM_MD5,
>> +    MD5_DIGEST_SIZE,
>> +    Md5GetContextSize,
>> +    Md5Init,
>> +    Md5Update,
>> +    Md5Final
>> +  },
>> +};
>> +
>> +//
>> +// Ordered list of mChapHash[*].Algorithm values. It is formatted for
>> the
>> +// CHAP_A=<A1,A2...> value string, by the IScsiCHAPInitHashList()
>> function. It
>> +// is sent by the initiator in ISCSI_CHAP_STEP_ONE.
>> +//
>> +STATIC CHAR8 mChapHashListString[
>> +               3 +                                      // UINT8
>> identifier in
>> +                                                        //   decimal
>> +               (1 + 3) * (ARRAY_SIZE (mChapHash) - 1) + // comma
>> prepended for
>> +                                                        //   entries
>> after the
>> +                                                        //   first
>> +               1 +                                      // extra
>> character for
>> +                                                        //  
>> AsciiSPrint()
>> +                                                        //  
>> truncation check
>> +               1                                        //
>> terminating NUL
>> +               ];
>> +
>>   /**
>>     Initiator calculates its own expected hash value.
>>       @param[in]   ChapIdentifier     iSCSI CHAP identifier sent by
>> authenticator.
>>     @param[in]   ChapSecret         iSCSI CHAP secret of the
>> authenticator.
>>     @param[in]   SecretLength       The length of iSCSI CHAP secret.
>>     @param[in]   ChapChallenge      The challenge message sent by
>> authenticator.
>>     @param[in]   ChallengeLength    The length of iSCSI CHAP challenge
>> message.
>> +  @param[in]   Hash               Pointer to the CHAP_HASH structure
>> that
>> +                                  determines the hashing algorithm to
>> use. The
>> +                                  caller is responsible for making
>> Hash point
>> +                                  to an "mChapHash" element.
>>     @param[out]  ChapResponse       The calculation of the expected
>> hash value.
>>       @retval EFI_SUCCESS             The expected hash value was
>> calculatedly
>>                                     successfully.
>>     @retval EFI_PROTOCOL_ERROR      The length of the secret should be
>> at least
>>                                     the length of the hash value for
>> the hashing
>>                                     algorithm chosen.
>> -  @retval EFI_PROTOCOL_ERROR      MD5 hash operation fail.
>> -  @retval EFI_OUT_OF_RESOURCES    Fail to allocate resource to
>> complete MD5.
>> +  @retval EFI_PROTOCOL_ERROR      Hash operation fails.
>> +  @retval EFI_OUT_OF_RESOURCES    Failure to allocate resource to
>> complete
>> +                                  hashing.
>>     **/
>>   EFI_STATUS
>>   IScsiCHAPCalculateResponse (
>>     IN  UINT32          ChapIdentifier,
>>     IN  CHAR8           *ChapSecret,
>>     IN  UINT32          SecretLength,
>>     IN  UINT8           *ChapChallenge,
>>     IN  UINT32          ChallengeLength,
>> +  IN  CONST CHAP_HASH *Hash,
>>     OUT UINT8           *ChapResponse
>>     )
>>   {
>> -  UINTN       Md5ContextSize;
>> -  VOID        *Md5Ctx;
>> +  UINTN       ContextSize;
>> +  VOID        *Ctx;
>>     CHAR8       IdByte[1];
>>     EFI_STATUS  Status;
>>       if (SecretLength < ISCSI_CHAP_SECRET_MIN_LEN) {
>>       return EFI_PROTOCOL_ERROR;
>>     }
>>   -  Md5ContextSize = Md5GetContextSize ();
>> -  Md5Ctx = AllocatePool (Md5ContextSize);
>> -  if (Md5Ctx == NULL) {
>> +  ASSERT (Hash != NULL);
>> +
>> +  ContextSize = Hash->GetContextSize ();
>> +  Ctx = AllocatePool (ContextSize);
>> +  if (Ctx == NULL) {
>>       return EFI_OUT_OF_RESOURCES;
>>     }
>>       Status = EFI_PROTOCOL_ERROR;
>>   -  if (!Md5Init (Md5Ctx)) {
>> +  if (!Hash->Init (Ctx)) {
>>       goto Exit;
>>     }
>>       //
>>     // Hash Identifier - Only calculate 1 byte data (RFC1994)
>>     //
>>     IdByte[0] = (CHAR8) ChapIdentifier;
>> -  if (!Md5Update (Md5Ctx, IdByte, 1)) {
>> +  if (!Hash->Update (Ctx, IdByte, 1)) {
>>       goto Exit;
>>     }
>>       //
>>     // Hash Secret
>>     //
>> -  if (!Md5Update (Md5Ctx, ChapSecret, SecretLength)) {
>> +  if (!Hash->Update (Ctx, ChapSecret, SecretLength)) {
>>       goto Exit;
>>     }
>>       //
>>     // Hash Challenge received from Target
>>     //
>> -  if (!Md5Update (Md5Ctx, ChapChallenge, ChallengeLength)) {
>> +  if (!Hash->Update (Ctx, ChapChallenge, ChallengeLength)) {
>>       goto Exit;
>>     }
>>   -  if (Md5Final (Md5Ctx, ChapResponse)) {
>> +  if (Hash->Final (Ctx, ChapResponse)) {
>>       Status = EFI_SUCCESS;
>>     }
>>     Exit:
>> -  FreePool (Md5Ctx);
>> +  FreePool (Ctx);
>>     return Status;
>>   }
>>     /**
>>     The initiator checks the CHAP response replied by target against
>> its own
>>     calculation of the expected hash value.
>>       @param[in]   AuthData             iSCSI CHAP authentication data.
>>     @param[in]   TargetResponse       The response from target.
>>       @retval EFI_SUCCESS               The response from target passed
>>                                       authentication.
>>     @retval EFI_SECURITY_VIOLATION    The response from target was not
>> expected
>>                                       value.
>>     @retval Others                    Other errors as indicated.
>>     **/
>>   EFI_STATUS
>>   IScsiCHAPAuthTarget (
>>     IN  ISCSI_CHAP_AUTH_DATA  *AuthData,
>>     IN  UINT8                 *TargetResponse
>>     )
>>   {
>>     EFI_STATUS  Status;
>>     UINT32      SecretSize;
>>     UINT8       VerifyRsp[ISCSI_CHAP_MAX_DIGEST_SIZE];
>>       Status      = EFI_SUCCESS;
>>       SecretSize  = (UINT32) AsciiStrLen
>> (AuthData->AuthConfig->ReverseCHAPSecret);
>> +
>> +  ASSERT (AuthData->Hash != NULL);
>> +
>>     Status = IScsiCHAPCalculateResponse (
>>                AuthData->OutIdentifier,
>>                AuthData->AuthConfig->ReverseCHAPSecret,
>>                SecretSize,
>>                AuthData->OutChallenge,
>> -             MD5_DIGEST_SIZE,                         // ChallengeLength
>> +             AuthData->Hash->DigestSize,              // ChallengeLength
>> +             AuthData->Hash,
>>                VerifyRsp
>>                );
>>   -  if (CompareMem (VerifyRsp, TargetResponse, MD5_DIGEST_SIZE) != 0) {
>> +  if (CompareMem (VerifyRsp, TargetResponse,
>> +        AuthData->Hash->DigestSize) != 0) {
>>       Status = EFI_SECURITY_VIOLATION;
>>     }
> Either break like regular function call or leave it in a single line for
> readability, since UEFI coding standard section 5.1.1 allows for lines
> up to 120.
> I opt for the latter, since param break will look ugly, but if it looks
> better in your editor than a line over 80 chars in size - go for it.

My mistake, sorry -- I forgot that the "condensed style" that we
actually prefer in ArmVirtPkg and OvmfPkg is not accepted in other packages.

So, I will insert the line breaks rigorously -- as explained elsewhere,
my strict 80 chars/line limit is not due to my editor, but to my desire
to fit two source code windows side-by-side, combined with my
not-so-great eyesight, and inability to use multiple monitors at the
same time (or one huge monitor).

I'll fix up the other instances of this same style issue as well.

Thanks!
Laszlo


>>       return Status;
>>   }
>>       /**
>>     This function checks the received iSCSI Login Response during the
>> security
>>     negotiation stage.
>>       @param[in] Conn             The iSCSI connection.
>>       @retval EFI_SUCCESS          The Login Response passed the CHAP
>> validation.
>>     @retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
>>     @retval EFI_PROTOCOL_ERROR   Some kind of protocol error occurred.
>>     @retval Others               Other errors as indicated.
>>     **/
>> @@ -150,38 +196,39 @@ EFI_STATUS
>>   IScsiCHAPOnRspReceived (
>>     IN ISCSI_CONNECTION  *Conn
>>     )
>>   {
>>     EFI_STATUS                  Status;
>>     ISCSI_SESSION               *Session;
>>     ISCSI_CHAP_AUTH_DATA        *AuthData;
>>     CHAR8                       *Value;
>>     UINT8                       *Data;
>>     UINT32                      Len;
>>     LIST_ENTRY                  *KeyValueList;
>>     UINTN                       Algorithm;
>>     CHAR8                       *Identifier;
>>     CHAR8                       *Challenge;
>>     CHAR8                       *Name;
>>     CHAR8                       *Response;
>>     UINT8                       TargetRsp[ISCSI_CHAP_MAX_DIGEST_SIZE];
>>     UINT32                      RspLen;
>>     UINTN                       Result;
>> +  UINTN                       HashIndex;
>>       ASSERT (Conn->CurrentStage == ISCSI_SECURITY_NEGOTIATION);
>>     ASSERT (Conn->RspQue.BufNum != 0);
>>       Session     = Conn->Session;
>>     AuthData    = &Session->AuthData.CHAP;
>>     Len         = Conn->RspQue.BufSize;
>>     Data        = AllocateZeroPool (Len);
>>     if (Data == NULL) {
>>       return EFI_OUT_OF_RESOURCES;
>>     }
>>     //
>>     // Copy the data in case the data spans over multiple PDUs.
>>     //
>>     NetbufQueCopy (&Conn->RspQue, 0, Len, Data);
>>       //
>>     // Build the key-value list from the data segment of the Login
>> Response.
>>     //
>> @@ -241,44 +288,54 @@ IScsiCHAPOnRspReceived (
>>       // Transit to CHAP step one.
>>       //
>>       Conn->AuthStep  = ISCSI_CHAP_STEP_ONE;
>>       Status          = EFI_SUCCESS;
>>       break;
>>       case ISCSI_CHAP_STEP_TWO:
>>       //
>>       // The Target replies with CHAP_A=<A> CHAP_I=<I> CHAP_C=<C>
>>       //
>>       Value = IScsiGetValueByKeyFromList (
>>                 KeyValueList,
>>                 ISCSI_KEY_CHAP_ALGORITHM
>>                 );
>>       if (Value == NULL) {
>>         goto ON_EXIT;
>>       }
>>         Algorithm = IScsiNetNtoi (Value);
>> -    if (Algorithm != ISCSI_CHAP_ALGORITHM_MD5) {
>> +    for (HashIndex = 0; HashIndex < ARRAY_SIZE (mChapHash);
>> HashIndex++) {
>> +      if (Algorithm == mChapHash[HashIndex].Algorithm) {
>> +        break;
>> +      }
>> +    }
>> +    if (HashIndex == ARRAY_SIZE (mChapHash)) {
>>         //
>>         // Unsupported algorithm is chosen by target.
>>         //
>>         goto ON_EXIT;
>>       }
>> +    //
>> +    // Remember the target's chosen hash algorithm.
>> +    //
>> +    ASSERT (AuthData->Hash == NULL);
>> +    AuthData->Hash = &mChapHash[HashIndex];
>>         Identifier = IScsiGetValueByKeyFromList (
>>                      KeyValueList,
>>                      ISCSI_KEY_CHAP_IDENTIFIER
>>                      );
>>       if (Identifier == NULL) {
>>         goto ON_EXIT;
>>       }
>>         Challenge = IScsiGetValueByKeyFromList (
>>                     KeyValueList,
>>                     ISCSI_KEY_CHAP_CHALLENGE
>>                     );
>>       if (Challenge == NULL) {
>>         goto ON_EXIT;
>>       }
>>       //
>>       // Process the CHAP identifier and CHAP Challenge from Target.
>>       // Calculate Response value.
>> @@ -289,76 +346,78 @@ IScsiCHAPOnRspReceived (
>>       }
>>         AuthData->InIdentifier      = (UINT32) Result;
>>       AuthData->InChallengeLength = (UINT32) sizeof
>> (AuthData->InChallenge);
>>       Status = IScsiHexToBin (
>>                  (UINT8 *) AuthData->InChallenge,
>>                  &AuthData->InChallengeLength,
>>                  Challenge
>>                  );
>>       if (EFI_ERROR (Status)) {
>>         Status = EFI_PROTOCOL_ERROR;
>>         goto ON_EXIT;
>>       }
>>       Status = IScsiCHAPCalculateResponse (
>>                  AuthData->InIdentifier,
>>                  AuthData->AuthConfig->CHAPSecret,
>>                  (UINT32) AsciiStrLen (AuthData->AuthConfig->CHAPSecret),
>>                  AuthData->InChallenge,
>>                  AuthData->InChallengeLength,
>> +               AuthData->Hash,
>>                  AuthData->CHAPResponse
>>                  );
>>         //
>>       // Transit to next step.
>>       //
>>       Conn->AuthStep = ISCSI_CHAP_STEP_THREE;
>>       break;
>>       case ISCSI_CHAP_STEP_THREE:
>>       //
>>       // One way CHAP authentication and the target would like to
>>       // authenticate us.
>>       //
>>       Status = EFI_SUCCESS;
>>       break;
>>       case ISCSI_CHAP_STEP_FOUR:
>>       ASSERT (AuthData->AuthConfig->CHAPType == ISCSI_CHAP_MUTUAL);
>>       //
>>       // The forth step, CHAP_N=<N> CHAP_R=<R> is received from Target.
>>       //
>>       Name = IScsiGetValueByKeyFromList (KeyValueList,
>> ISCSI_KEY_CHAP_NAME);
>>       if (Name == NULL) {
>>         goto ON_EXIT;
>>       }
>>         Response = IScsiGetValueByKeyFromList (
>>                    KeyValueList,
>>                    ISCSI_KEY_CHAP_RESPONSE
>>                    );
>>       if (Response == NULL) {
>>         goto ON_EXIT;
>>       }
>>   -    RspLen = MD5_DIGEST_SIZE;
>> +    ASSERT (AuthData->Hash != NULL);
>> +    RspLen = AuthData->Hash->DigestSize;
>>       Status = IScsiHexToBin (TargetRsp, &RspLen, Response);
>> -    if (EFI_ERROR (Status) || RspLen != MD5_DIGEST_SIZE) {
>> +    if (EFI_ERROR (Status) || RspLen != AuthData->Hash->DigestSize) {
>>         Status = EFI_PROTOCOL_ERROR;
>>         goto ON_EXIT;
>>       }
>>         //
>>       // Check the CHAP Name and Response replied by Target.
>>       //
>>       Status = IScsiCHAPAuthTarget (AuthData, TargetRsp);
>>       break;
>>       default:
>>       break;
>>     }
>>     ON_EXIT:
>>       if (KeyValueList != NULL) {
>>       IScsiFreeKeyValueList (KeyValueList);
>>     }
>> @@ -442,88 +501,141 @@ IScsiCHAPToSendReq (
>>         Session->ConfigData->SessionConfigData.TargetName
>>         );
>>         if (Session->AuthType == ISCSI_AUTH_TYPE_NONE) {
>>         Value = ISCSI_KEY_VALUE_NONE;
>>         ISCSI_SET_FLAG (LoginReq, ISCSI_LOGIN_REQ_PDU_FLAG_TRANSIT);
>>       } else {
>>         Value = ISCSI_AUTH_METHOD_CHAP;
>>       }
>>         IScsiAddKeyValuePair (Pdu, ISCSI_KEY_AUTH_METHOD, Value);
>>         break;
>>       case ISCSI_CHAP_STEP_ONE:
>>       //
>>       // First step, send the Login Request with CHAP_A=<A1,A2...>
>> key-value
>>       // pair.
>>       //
>> -    AsciiSPrint (ValueStr, sizeof (ValueStr), "%d",
>> ISCSI_CHAP_ALGORITHM_MD5);
>> -    IScsiAddKeyValuePair (Pdu, ISCSI_KEY_CHAP_ALGORITHM, ValueStr);
>> +    IScsiAddKeyValuePair (Pdu, ISCSI_KEY_CHAP_ALGORITHM,
>> mChapHashListString);
>>         Conn->AuthStep = ISCSI_CHAP_STEP_TWO;
>>       break;
>>       case ISCSI_CHAP_STEP_THREE:
>>       //
>>       // Third step, send the Login Request with CHAP_N=<N> CHAP_R=<R> or
>>       // CHAP_N=<N> CHAP_R=<R> CHAP_I=<I> CHAP_C=<C> if target
>> authentication is
>>       // required too.
>>       //
>>       // CHAP_N=<N>
>>       //
>>       IScsiAddKeyValuePair (
>>         Pdu,
>>         ISCSI_KEY_CHAP_NAME,
>>         (CHAR8 *) &AuthData->AuthConfig->CHAPName
>>         );
>>       //
>>       // CHAP_R=<R>
>>       //
>> +    ASSERT (AuthData->Hash != NULL);
>>       BinToHexStatus = IScsiBinToHex (
>>                          (UINT8 *) AuthData->CHAPResponse,
>> -                       MD5_DIGEST_SIZE,
>> +                       AuthData->Hash->DigestSize,
>>                          Response,
>>                          &RspLen
>>                          );
>>       ASSERT_EFI_ERROR (BinToHexStatus);
>>       IScsiAddKeyValuePair (Pdu, ISCSI_KEY_CHAP_RESPONSE, Response);
>>         if (AuthData->AuthConfig->CHAPType == ISCSI_CHAP_MUTUAL) {
>>         //
>>         // CHAP_I=<I>
>>         //
>>         IScsiGenRandom ((UINT8 *) &AuthData->OutIdentifier, 1);
>>         AsciiSPrint (ValueStr, sizeof (ValueStr), "%d",
>> AuthData->OutIdentifier);
>>         IScsiAddKeyValuePair (Pdu, ISCSI_KEY_CHAP_IDENTIFIER, ValueStr);
>>         //
>>         // CHAP_C=<C>
>>         //
>> -      IScsiGenRandom ((UINT8 *) AuthData->OutChallenge,
>> MD5_DIGEST_SIZE);
>> +      IScsiGenRandom ((UINT8 *) AuthData->OutChallenge,
>> +        AuthData->Hash->DigestSize);
> Coding standard. Parameter break.
>>         BinToHexStatus = IScsiBinToHex (
>>                            (UINT8 *) AuthData->OutChallenge,
>> -                         MD5_DIGEST_SIZE,
>> +                         AuthData->Hash->DigestSize,
>>                            Challenge,
>>                            &ChallengeLen
>>                            );
>>         ASSERT_EFI_ERROR (BinToHexStatus);
>>         IScsiAddKeyValuePair (Pdu, ISCSI_KEY_CHAP_CHALLENGE, Challenge);
>>           Conn->AuthStep = ISCSI_CHAP_STEP_FOUR;
>>       }
>>       //
>>       // Set the stage transition flag.
>>       //
>>       ISCSI_SET_FLAG (LoginReq, ISCSI_LOGIN_REQ_PDU_FLAG_TRANSIT);
>>       break;
>>       default:
>>       Status = EFI_PROTOCOL_ERROR;
>>       break;
>>     }
>>       FreePool (Response);
>>     FreePool (Challenge);
>>       return Status;
>>   }
>> +
>> +/**
>> +  Initialize the CHAP_A=<A1,A2...> *value* string for the entire
>> driver, to be
>> +  sent by the initiator in ISCSI_CHAP_STEP_ONE.
>> +
>> +  This function sanity-checks the internal table of supported CHAP
>> hashing
>> +  algorithms, as well.
>> +**/
>> +VOID
>> +IScsiCHAPInitHashList (
>> +  VOID
>> +  )
>> +{
>> +  CHAR8           *Position;
>> +  UINTN           Left;
>> +  UINTN           HashIndex;
>> +  CONST CHAP_HASH *Hash;
>> +  UINTN           Printed;
>> +
>> +  Position = mChapHashListString;
>> +  Left = sizeof (mChapHashListString);
>> +  for (HashIndex = 0; HashIndex < ARRAY_SIZE (mChapHash); HashIndex++) {
>> +    Hash = &mChapHash[HashIndex];
>> +
>> +    //
>> +    // Format the next hash identifier.
>> +    //
>> +    // Assert that we can format at least one non-NUL character, i.e.
>> that we
>> +    // can progress. Truncation is checked after printing.
>> +    //
>> +    ASSERT (Left >= 2);
>> +    Printed = AsciiSPrint (Position, Left, "%a%d", (HashIndex == 0) ?
>> "" : ",",
>> +                Hash->Algorithm);
> Coding standard. Parameter break.
>> +    //
>> +    // There's no way to differentiate between the "buffer filled to
>> the brim,
>> +    // but not truncated" result and the "truncated" result of
>> AsciiSPrint().
>> +    // This is why "mChapHashListString" has an extra byte allocated,
>> and the
>> +    // reason why we use the less-than (rather than the
>> less-than-or-equal-to)
>> +    // relational operator in the assertion below -- we enforce "no
>> truncation"
>> +    // by excluding the "completely used up" case too.
>> +    //
>> +    ASSERT (Printed + 1 < Left);
>> +
>> +    Position += Printed;
>> +    Left -= Printed;
>> +
>> +    //
>> +    // Sanity-check the digest size for Hash.
>> +    //
>> +    ASSERT (Hash->DigestSize <= ISCSI_CHAP_MAX_DIGEST_SIZE);
>> +  }
>> +}
>> diff --git a/NetworkPkg/IScsiDxe/IScsiDriver.c
>> b/NetworkPkg/IScsiDxe/IScsiDriver.c
>> index 98b73308c118..485c92972113 100644
>> --- a/NetworkPkg/IScsiDxe/IScsiDriver.c
>> +++ b/NetworkPkg/IScsiDxe/IScsiDriver.c
>> @@ -1763,38 +1763,40 @@ IScsiDriverEntryPoint (
>>       goto Error1;
>>     }
>>       //
>>     // Install the iSCSI Initiator Name Protocol.
>>     //
>>     Status = gBS->InstallProtocolInterface (
>>                     &ImageHandle,
>>                     &gEfiIScsiInitiatorNameProtocolGuid,
>>                     EFI_NATIVE_INTERFACE,
>>                     &gIScsiInitiatorName
>>                     );
>>     if (EFI_ERROR (Status)) {
>>       goto Error2;
>>     }
>>       //
>>     // Create the private data structures.
>>     //
>> +  IScsiCHAPInitHashList ();
>> +
>>     mPrivate = AllocateZeroPool (sizeof (ISCSI_PRIVATE_DATA));
>>     if (mPrivate == NULL) {
>>       Status = EFI_OUT_OF_RESOURCES;
>>       goto Error3;
>>     }
>>       InitializeListHead (&mPrivate->NicInfoList);
>>     InitializeListHead (&mPrivate->AttemptConfigs);
>>       //
>>     // Initialize the configuration form of iSCSI.
>>     //
>>     Status = IScsiConfigFormInit
>> (gIScsiIp4DriverBinding.DriverBindingHandle);
>>     if (EFI_ERROR (Status)) {
>>       goto Error4;
>>     }
>>       //
>>     // Create the Maximum Attempts.
>> diff --git a/NetworkPkg/IScsiDxe/IScsiProto.c
>> b/NetworkPkg/IScsiDxe/IScsiProto.c
>> index 69d1b39dbb1f..e62736bc041f 100644
>> --- a/NetworkPkg/IScsiDxe/IScsiProto.c
>> +++ b/NetworkPkg/IScsiDxe/IScsiProto.c
>> @@ -416,38 +416,41 @@ IScsiGetIp6NicInfo (
>>       return Status;
>>   }
>>     /**
>>     Re-set any stateful session-level authentication information that
>> is used by
>>     the leading login / leading connection.
>>       (Note that this driver only supports a single connection per
>> session -- see
>>     ISCSI_MAX_CONNS_PER_SESSION.)
>>       @param[in,out] Session  The iSCSI session.
>>   **/
>>   STATIC
>>   VOID
>>   IScsiSessionResetAuthData (
>>     IN OUT ISCSI_SESSION *Session
>>     )
>>   {
>> +  if (Session->AuthType == ISCSI_AUTH_TYPE_CHAP) {
>> +    Session->AuthData.CHAP.Hash = NULL;
>> +  }
>>   }
>>     /**
>>     Login the iSCSI session.
>>       @param[in]  Session           The iSCSI session.
>>       @retval EFI_SUCCESS           The iSCSI session login procedure
>> finished.
>>     @retval EFI_OUT_OF_RESOURCES  Failed to allocate memory.
>>     @retval EFI_NO_MEDIA          There was a media error.
>>     @retval Others                Other errors as indicated.
>>     **/
>>   EFI_STATUS
>>   IScsiSessionLogin (
>>     IN ISCSI_SESSION  *Session
>>     )
>>   {
>>     EFI_STATUS        Status;
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#76849): https://edk2.groups.io/g/devel/message/76849
Mute This Topic: https://groups.io/mt/83395028/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-





More information about the edk2-devel-archive mailing list