[edk2-devel] [edk2-platforms][PATCH v4 33/41] KabylakeSiliconPkg: Remove PCH SPI PPI and Protocol from package
Michael Kubacki
mikuback at linux.microsoft.com
Fri Jun 25 21:21:12 UTC 2021
From: Michael Kubacki <michael.kubacki at microsoft.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3307
The following PPI and Protocols have moved to IntelSiliconPkg. The
remaining definitions in KabylakeSiliconPkg are removed and libs
modules that need to reference IntelSiliconPkg are updated.
1. gPchSpiProtocolGuid
2. gPchSmmSpiProtocolGuid
3. gPchSpiPpiGuid
Cc: Chasel Chiu <chasel.chiu at intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty at intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki at microsoft.com>
Reviewed-by: Chasel Chiu <chasel.chiu at intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone at intel.com>
---
Silicon/Intel/KabylakeSiliconPkg/Hsti/Dxe/HstiSiliconDxe.inf | 3 +-
Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Ppi/Spi.h | 26 --
Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Protocol/Spi.h | 293 --------------------
Silicon/Intel/KabylakeSiliconPkg/Pch/Library/PeiSpiLib/PeiSpiLib.inf | 1 +
Silicon/Intel/KabylakeSiliconPkg/Pch/Spi/Smm/PchSpiSmm.inf | 1 +
Silicon/Intel/KabylakeSiliconPkg/SiPkg.dec | 3 -
6 files changed, 4 insertions(+), 323 deletions(-)
diff --git a/Silicon/Intel/KabylakeSiliconPkg/Hsti/Dxe/HstiSiliconDxe.inf b/Silicon/Intel/KabylakeSiliconPkg/Hsti/Dxe/HstiSiliconDxe.inf
index 52e3b6ceba3e..bd12fa691d40 100644
--- a/Silicon/Intel/KabylakeSiliconPkg/Hsti/Dxe/HstiSiliconDxe.inf
+++ b/Silicon/Intel/KabylakeSiliconPkg/Hsti/Dxe/HstiSiliconDxe.inf
@@ -46,6 +46,7 @@ [Sources]
[Packages]
MdePkg/MdePkg.dec
UefiCpuPkg/UefiCpuPkg.dec
+ IntelSiliconPkg/IntelSiliconPkg.dec
KabylakeSiliconPkg/SiPkg.dec
SecurityPkg/SecurityPkg.dec
@@ -92,7 +93,7 @@ [Protocols]
gEfiMpServiceProtocolGuid ## CONSUMES
gDxeSiPolicyProtocolGuid ## CONSUMES
gHstiPublishCompleteProtocolGuid ## PRODUCES
-
+
[FixedPcd]
gSiPkgTokenSpaceGuid.PcdHstiIhvFeature1
gSiPkgTokenSpaceGuid.PcdHstiIhvFeature2
diff --git a/Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Ppi/Spi.h b/Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Ppi/Spi.h
deleted file mode 100644
index e11f82edcaea..000000000000
--- a/Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Ppi/Spi.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/** @file
- This file defines the PCH SPI PPI which implements the
- Intel(R) PCH SPI Host Controller Compatibility Interface.
-
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-#ifndef _PCH_SPI_PPI_H_
-#define _PCH_SPI_PPI_H_
-
-#include <Protocol/Spi.h>
-
-//
-// Extern the GUID for PPI users.
-//
-extern EFI_GUID gPchSpiPpiGuid;
-
-/**
- Reuse the PCH_SPI_PROTOCOL definitions
- This is possible becaues the PPI implementation does not rely on a PeiService pointer,
- as it uses EDKII Glue Lib to do IO accesses
-**/
-typedef PCH_SPI_PROTOCOL PCH_SPI_PPI;
-
-#endif
diff --git a/Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Protocol/Spi.h b/Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Protocol/Spi.h
deleted file mode 100644
index 8c66e5063fa9..000000000000
--- a/Silicon/Intel/KabylakeSiliconPkg/Pch/Include/Protocol/Spi.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/** @file
- This file defines the PCH SPI Protocol which implements the
- Intel(R) PCH SPI Host Controller Compatibility Interface.
-
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-#ifndef _PCH_SPI_PROTOCOL_H_
-#define _PCH_SPI_PROTOCOL_H_
-
-//
-// Extern the GUID for protocol users.
-//
-extern EFI_GUID gPchSpiProtocolGuid;
-extern EFI_GUID gPchSmmSpiProtocolGuid;
-
-//
-// Forward reference for ANSI C compatibility
-//
-typedef struct _PCH_SPI_PROTOCOL PCH_SPI_PROTOCOL;
-
-//
-// SPI protocol data structures and definitions
-//
-
-/**
- Flash Region Type
-**/
-typedef enum {
- FlashRegionDescriptor,
- FlashRegionBios,
- FlashRegionMe,
- FlashRegionGbE,
- FlashRegionPlatformData,
- FlashRegionDer,
- FlashRegionAll,
- FlashRegionMax
-} FLASH_REGION_TYPE;
-
-//
-// Protocol member functions
-//
-
-/**
- Read data from the flash part.
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
- @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
- @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
- @param[out] Buffer The Pointer to caller-allocated buffer containing the dada received.
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_FLASH_READ) (
- IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
- IN UINT32 Address,
- IN UINT32 ByteCount,
- OUT UINT8 *Buffer
- );
-
-/**
- Write data to the flash part. Remark: Erase may be needed before write to the flash part.
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
- @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
- @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
- @param[in] Buffer Pointer to caller-allocated buffer containing the data sent during the SPI cycle.
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_FLASH_WRITE) (
- IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
- IN UINT32 Address,
- IN UINT32 ByteCount,
- IN UINT8 *Buffer
- );
-
-/**
- Erase some area on the flash part.
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for flash cycle which is listed in the Descriptor.
- @param[in] Address The Flash Linear Address must fall within a region for which BIOS has access permissions.
- @param[in] ByteCount Number of bytes in the data portion of the SPI cycle.
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_FLASH_ERASE) (
- IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
- IN UINT32 Address,
- IN UINT32 ByteCount
- );
-
-/**
- Read SFDP data from the flash part.
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] ComponentNumber The Componen Number for chip select
- @param[in] Address The starting byte address for SFDP data read.
- @param[in] ByteCount Number of bytes in SFDP data portion of the SPI cycle
- @param[out] SfdpData The Pointer to caller-allocated buffer containing the SFDP data received
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_FLASH_READ_SFDP) (
- IN PCH_SPI_PROTOCOL *This,
- IN UINT8 ComponentNumber,
- IN UINT32 Address,
- IN UINT32 ByteCount,
- OUT UINT8 *SfdpData
- );
-
-/**
- Read Jedec Id from the flash part.
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] ComponentNumber The Componen Number for chip select
- @param[in] ByteCount Number of bytes in JedecId data portion of the SPI cycle, the data size is 3 typically
- @param[out] JedecId The Pointer to caller-allocated buffer containing JEDEC ID received
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_FLASH_READ_JEDEC_ID) (
- IN PCH_SPI_PROTOCOL *This,
- IN UINT8 ComponentNumber,
- IN UINT32 ByteCount,
- OUT UINT8 *JedecId
- );
-
-/**
- Write the status register in the flash part.
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
- @param[in] StatusValue The Pointer to caller-allocated buffer containing the value of Status register writing
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_FLASH_WRITE_STATUS) (
- IN PCH_SPI_PROTOCOL *This,
- IN UINT32 ByteCount,
- IN UINT8 *StatusValue
- );
-
-/**
- Read status register in the flash part.
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] ByteCount Number of bytes in Status data portion of the SPI cycle, the data size is 1 typically
- @param[out] StatusValue The Pointer to caller-allocated buffer containing the value of Status register received.
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_FLASH_READ_STATUS) (
- IN PCH_SPI_PROTOCOL *This,
- IN UINT32 ByteCount,
- OUT UINT8 *StatusValue
- );
-
-/**
- Get the SPI region base and size, based on the enum type
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] FlashRegionType The Flash Region type for for the base address which is listed in the Descriptor.
- @param[out] BaseAddress The Flash Linear Address for the Region 'n' Base
- @param[out] RegionSize The size for the Region 'n'
-
- @retval EFI_SUCCESS Read success
- @retval EFI_INVALID_PARAMETER Invalid region type given
- @retval EFI_DEVICE_ERROR The region is not used
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_GET_REGION_ADDRESS) (
- IN PCH_SPI_PROTOCOL *This,
- IN FLASH_REGION_TYPE FlashRegionType,
- OUT UINT32 *BaseAddress,
- OUT UINT32 *RegionSize
- );
-
-/**
- Read PCH Soft Strap Values
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] SoftStrapAddr PCH Soft Strap address offset from FPSBA.
- @param[in] ByteCount Number of bytes in SoftStrap data portion of the SPI cycle
- @param[out] SoftStrapValue The Pointer to caller-allocated buffer containing PCH Soft Strap Value.
- If the value of ByteCount is 0, the data type of SoftStrapValue should be UINT16 and SoftStrapValue will be PCH Soft Strap Length
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_READ_PCH_SOFTSTRAP) (
- IN PCH_SPI_PROTOCOL *This,
- IN UINT32 SoftStrapAddr,
- IN UINT32 ByteCount,
- OUT VOID *SoftStrapValue
- );
-
-/**
- Read CPU Soft Strap Values
-
- @param[in] This Pointer to the PCH_SPI_PROTOCOL instance.
- @param[in] SoftStrapAddr CPU Soft Strap address offset from FCPUSBA.
- @param[in] ByteCount Number of bytes in SoftStrap data portion of the SPI cycle.
- @param[out] SoftStrapValue The Pointer to caller-allocated buffer containing CPU Soft Strap Value.
- If the value of ByteCount is 0, the data type of SoftStrapValue should be UINT16 and SoftStrapValue will be PCH Soft Strap Length
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
-
- @retval EFI_SUCCESS Command succeed.
- @retval EFI_INVALID_PARAMETER The parameters specified are not valid.
- @retval EFI_DEVICE_ERROR Device error, command aborts abnormally.
-**/
-typedef
-EFI_STATUS
-(EFIAPI *PCH_SPI_READ_CPU_SOFTSTRAP) (
- IN PCH_SPI_PROTOCOL *This,
- IN UINT32 SoftStrapAddr,
- IN UINT32 ByteCount,
- OUT VOID *SoftStrapValue
- );
-
-/**
- These protocols/PPI allows a platform module to perform SPI operations through the
- Intel PCH SPI Host Controller Interface.
-**/
-struct _PCH_SPI_PROTOCOL {
- /**
- This member specifies the revision of this structure. This field is used to
- indicate backwards compatible changes to the protocol.
- **/
- UINT8 Revision;
- PCH_SPI_FLASH_READ FlashRead; ///< Read data from the flash part.
- PCH_SPI_FLASH_WRITE FlashWrite; ///< Write data to the flash part. Remark: Erase may be needed before write to the flash part.
- PCH_SPI_FLASH_ERASE FlashErase; ///< Erase some area on the flash part.
- PCH_SPI_FLASH_READ_SFDP FlashReadSfdp; ///< Read SFDP data from the flash part.
- PCH_SPI_FLASH_READ_JEDEC_ID FlashReadJedecId; ///< Read Jedec Id from the flash part.
- PCH_SPI_FLASH_WRITE_STATUS FlashWriteStatus; ///< Write the status register in the flash part.
- PCH_SPI_FLASH_READ_STATUS FlashReadStatus; ///< Read status register in the flash part.
- PCH_SPI_GET_REGION_ADDRESS GetRegionAddress; ///< Get the SPI region base and size
- PCH_SPI_READ_PCH_SOFTSTRAP ReadPchSoftStrap; ///< Read PCH Soft Strap Values
- PCH_SPI_READ_CPU_SOFTSTRAP ReadCpuSoftStrap; ///< Read CPU Soft Strap Values
-};
-
-/**
- PCH SPI PPI/PROTOCOL revision number
-
- Revision 1: Initial version
-**/
-#define PCH_SPI_SERVICES_REVISION 1
-
-#endif
diff --git a/Silicon/Intel/KabylakeSiliconPkg/Pch/Library/PeiSpiLib/PeiSpiLib.inf b/Silicon/Intel/KabylakeSiliconPkg/Pch/Library/PeiSpiLib/PeiSpiLib.inf
index 31f4ffe43a23..c6bc1ad406c8 100644
--- a/Silicon/Intel/KabylakeSiliconPkg/Pch/Library/PeiSpiLib/PeiSpiLib.inf
+++ b/Silicon/Intel/KabylakeSiliconPkg/Pch/Library/PeiSpiLib/PeiSpiLib.inf
@@ -32,6 +32,7 @@ [LibraryClasses]
[Packages]
MdePkg/MdePkg.dec
+ IntelSiliconPkg/IntelSiliconPkg.dec
KabylakeSiliconPkg/SiPkg.dec
[Sources]
diff --git a/Silicon/Intel/KabylakeSiliconPkg/Pch/Spi/Smm/PchSpiSmm.inf b/Silicon/Intel/KabylakeSiliconPkg/Pch/Spi/Smm/PchSpiSmm.inf
index 964489064a74..819dc2439f30 100644
--- a/Silicon/Intel/KabylakeSiliconPkg/Pch/Spi/Smm/PchSpiSmm.inf
+++ b/Silicon/Intel/KabylakeSiliconPkg/Pch/Spi/Smm/PchSpiSmm.inf
@@ -30,6 +30,7 @@ [LibraryClasses]
[Packages]
MdePkg/MdePkg.dec
+IntelSiliconPkg/IntelSiliconPkg.dec
KabylakeSiliconPkg/SiPkg.dec
KabylakeSiliconPkg/KabylakeSiliconPrivate.dec
diff --git a/Silicon/Intel/KabylakeSiliconPkg/SiPkg.dec b/Silicon/Intel/KabylakeSiliconPkg/SiPkg.dec
index 5ff7b39ca60e..d9ae9f6dfd91 100644
--- a/Silicon/Intel/KabylakeSiliconPkg/SiPkg.dec
+++ b/Silicon/Intel/KabylakeSiliconPkg/SiPkg.dec
@@ -294,13 +294,11 @@ [Protocols]
##
## PCH
##
-gPchSpiProtocolGuid = {0xc7d289, 0x1347, 0x4de0, {0xbf, 0x42, 0xe, 0x26, 0x9d, 0xe, 0xf3, 0x4a}}
gPchSerialGpioProtocolGuid = {0xf52c3858, 0x5ef8, 0x4d41, {0x83, 0x4e, 0xc3, 0x9e, 0xef, 0x8a, 0x45, 0xa3}}
gWdtProtocolGuid = {0xb42b8d12, 0x2acb, 0x499a, {0xa9, 0x20, 0xdd, 0x5b, 0xe6, 0xcf, 0x09, 0xb1}}
gPchInfoProtocolGuid = {0x984eb4e9, 0x5a95, 0x41de, {0xaa, 0xd0, 0x53, 0x66, 0x8c, 0xa5, 0x13, 0xc0}}
gPchSerialIoUartDebugInfoProtocolGuid = {0x2fd2b1bd, 0x0387, 0x4ec6, {0x94, 0x1f, 0xf1, 0x4b, 0x7f, 0x1c, 0x94, 0xb6}}
gEfiSmmSmbusProtocolGuid = {0x72e40094, 0x2ee1, 0x497a, {0x8f, 0x33, 0x4c, 0x93, 0x4a, 0x9e, 0x9c, 0x0c}}
-gPchSmmSpiProtocolGuid = {0x56521f06, 0xa62, 0x4822, {0x99, 0x63, 0xdf, 0x1, 0x9d, 0x72, 0xc7, 0xe1}}
gPchSmmIoTrapControlGuid = {0x514d2afd, 0x2096, 0x4283, {0x9d, 0xa6, 0x70, 0x0c, 0xd2, 0x7d, 0xc7, 0xa5}}
gPchTcoSmiDispatchProtocolGuid = {0x9e71d609, 0x6d24, 0x47fd, {0xb5, 0x72, 0x61, 0x40, 0xf8, 0xd9, 0xc2, 0xa4}}
gPchPcieSmiDispatchProtocolGuid = {0x3e7d2b56, 0x3f47, 0x42aa, {0x8f, 0x6b, 0x22, 0xf5, 0x19, 0x81, 0x8d, 0xab}}
@@ -361,7 +359,6 @@ [Ppis]
## PCH
##
gWdtPpiGuid = {0xf38d1338, 0xaf7a, 0x4fb6, {0x91, 0xdb, 0x1a, 0x9c, 0x21, 0x83, 0x57, 0x0d}}
-gPchSpiPpiGuid = {0xdade7ce3, 0x6971, 0x4b75, {0x82, 0x5e, 0xe, 0xe0, 0xeb, 0x17, 0x72, 0x2d}}
gPeiSmbusPolicyPpiGuid = {0x63b6e435, 0x32bc, 0x49c6, {0x81, 0xbd, 0xb7, 0xa1, 0xa0, 0xfe, 0x1a, 0x6c}}
gPchResetCallbackPpiGuid = {0x17865dc0, 0x0b8b, 0x4da8, {0x8b, 0x42, 0x7c, 0x46, 0xb8, 0x5c, 0xca, 0x4d}}
gPchResetPpiGuid = {0x433e0f9f, 0x05ae, 0x410a, {0xa0, 0xc3, 0xbf, 0x29, 0x8e, 0xcb, 0x25, 0xac}}
--
2.28.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#77130): https://edk2.groups.io/g/devel/message/77130
Mute This Topic: https://groups.io/mt/83794822/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list