[edk2-devel] [edk2-platforms PATCH 0/4] ACPI MDIO support for Marvell SoCs
Marcin Wojtas
mw at semihalf.com
Tue Jun 29 14:17:52 UTC 2021
Hi Leif,
pon., 14 cze 2021 o 23:55 Leif Lindholm <leif at nuviainc.com> napisał(a):
>
> Hi Marcin,
>
> On Sun, Jun 13, 2021 at 20:16:27 +0200, Marcin Wojtas wrote:
> > Hi,
> >
> > The MDIO ACPI binding has been established and merged to the
> > Linux tree,
>
> Congratulations! :)
>
> Is FreeBSD expected to follow suit?
There's no driver yet, but once it's finally created I will make sure
it supports ACPI properly.
>
> > hence it is now possible to update the ACPI
> > description of the platforms that base on the Marvell SoCs.
> >
> > For convenience, the code is exposed in the public github branch:
> > https://github.com/semihalf-wojtas-marcin/edk2-platforms/commits/acpi-mdio-r20210613
> > There is also MacchiatoBin firmware binary avaialable for testing:
> > https://drive.google.com/file/d/1eigP_aeM4wYQpEaLAlQzs3IN_w1-kQr0
> >
> > I'm looking forward to the comments or remarks.
>
> The patches themselves look straightforward enough.
> I *would* prefer some tested-by, for these sources rather than the
> binary, before merging though.
>
I have some our patches queued, that are blocked by this patchset. In
case no time is found for external testers - if this may help to get
it pushed through, please see below logs from the next-20210628 tag
and unchanged firmware. All network ports of MacchiatoBin and
CN913x-DB work properly, with full 1G/10G PHY support via X/MDIO
interfaces:
MacchiatoBin
# uname -a
Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29
09:14:07 CEST 2021 aarch64 GNU/Linux
# dmesg | grep MRVL0101
[ 1.829659] mv88x3340 MRVL0101:00-mii:00: Firmware version 0.3.3.0
[ 1.839622] mv88x3340 MRVL0101:00-mii:08: Firmware version 0.3.3.0
[ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver
[mv88x3340] (irq=POLL)
[ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver
[mv88x3340] (irq=POLL)
# dmesg | grep MRVL0100
[ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver
[Marvell 88E1510] (irq=POLL)
# dmesg | grep mvpp2
[...]
[ 2.748351] mvpp2 MRVL0110:00 eth1: PHY [MRVL0101:00-mii:00] driver
[mv88x3340] (irq=POLL)
[ 2.756701] mvpp2 MRVL0110:00 eth1: configuring for phy/10gbase-r link mode
[ 2.767479] mvpp2 MRVL0110:01 eth2: PHY [MRVL0101:00-mii:08] driver
[mv88x3340] (irq=POLL)
[ 2.775834] mvpp2 MRVL0110:01 eth2: configuring for phy/10gbase-r link mode
[ 2.919424] mvpp2 MRVL0110:01 eth3: PHY [MRVL0100:00-mii:00] driver
[Marvell 88E1510] (irq=POLL)
[ 2.928285] mvpp2 MRVL0110:01 eth3: configuring for phy/sgmii link mode
[ 2.936351] mvpp2 MRVL0110:01 eth4: configuring for
inband/2500base-x link mode
[ 5.987259] mvpp2 MRVL0110:01 eth3: Link is Up - 1Gbps/Full - flow
control off
#
CN913x-DB
# uname -a
Linux buildroot 5.13.0-rc7-next-20210628 #6 SMP PREEMPT Tue Jun 29
09:14:07 CEST 2021 aarch64 GNU/Linux
# dmesg | grep MRVL0100
[ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver
[Marvell 88E1510] (irq=POLL)
[ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver
[Marvell 88E1510] (irq=POLL)
# dmesg | grep mvpp2
[...]
[ 2.544917] mvpp2 MRVL0110:00 eth1: configuring for
inband/10gbase-r link mode
[ 2.552480] mvpp2 MRVL0110:00 eth1: Link is Up - 10Gbps/Full - flow
control rx
[ 2.621201] mvpp2 MRVL0110:00 eth2: PHY [MRVL0100:00-mii:00] driver
[Marvell 88E1510] (irq=POLL)
[ 2.630060] mvpp2 MRVL0110:00 eth2: configuring for phy/rgmii-id link mode
[ 2.741199] mvpp2 MRVL0110:00 eth3: PHY [MRVL0100:00-mii:01] driver
[Marvell 88E1510] (irq=POLL)
[ 2.750056] mvpp2 MRVL0110:00 eth3: configuring for phy/rgmii-id link mode
[ 2.810169] mvpp2 MRVL0110:01 eth4: configuring for
inband/10gbase-r link mode
[ 2.817471] mvpp2 MRVL0110:01 eth4: Link is Up - 10Gbps/Full - flow
control rx
[ 5.693231] mvpp2 MRVL0110:00 eth2: Link is Up - 1Gbps/Full - flow
control off
[ 10.840942] mvpp2 MRVL0110:00 eth1: Link is Down
[ 10.864124] mvpp2 MRVL0110:01 eth4: Link is Down
#
Best regards,
Marcin
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#77274): https://edk2.groups.io/g/devel/message/77274
Mute This Topic: https://groups.io/mt/83513508/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list