[edk2-devel] [PATCH edk2-platforms v2 1/4] SbsaQemu: Build infrastructure for StandaloneMm image
Leif Lindholm
leif at nuviainc.com
Mon Mar 1 17:05:07 UTC 2021
On Mon, Mar 01, 2021 at 14:19:49 +0900, Masahisa Kojima wrote:
> Add the build infrastructure for compilation of StandaloneMm image.
>
> Signed-off-by: Masahisa Kojima <masahisa.kojima at linaro.org>
> ---
> .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc | 132 ++++++++++++++++++
Please use --stat=1000 --stat-graph-width=20 when generating patches.
> Platform/Qemu/SbsaQemu/SbsaQemu.fdf | 6 +-
It is not immediately obvious to me why the pre-existing
SbsaQemuStandaloneMm.dsc needs to change. Is this something that can
be clarified in commit message?
Best Regards,
Leif
> .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf | 93 ++++++++++++
> 3 files changed, 228 insertions(+), 3 deletions(-)
> create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
>
> diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> new file mode 100644
> index 000000000000..87f5ee351eaa
> --- /dev/null
> +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> @@ -0,0 +1,132 @@
> +#
> +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +
> +################################################################################
> +#
> +# Defines Section - statements that will be processed to create a Makefile.
> +#
> +################################################################################
> +[Defines]
> + PLATFORM_NAME = SbsaQemuStandaloneMm
> + PLATFORM_GUID = A64CC0F5-7ACD-4975-BBE7-7EF6739C8668
> + PLATFORM_VERSION = 1.0
> + DSC_SPECIFICATION = 0x00010011
> + OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
> + SUPPORTED_ARCHITECTURES = AARCH64
> + BUILD_TARGETS = DEBUG|RELEASE|NOOPT
> + SKUID_IDENTIFIER = DEFAULT
> + FLASH_DEFINITION = Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> + DEFINE DEBUG_MESSAGE = TRUE
> +
> + # LzmaF86
> + DEFINE COMPRESSION_TOOL_GUID = D42AE6BD-1352-4bfb-909A-CA72A6EAE889
> +
> +################################################################################
> +#
> +# Library Class section - list of all Library Classes needed by this Platform.
> +#
> +################################################################################
> +[LibraryClasses]
> + #
> + # Basic
> + #
> + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
> + DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
> + ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
> + FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
> + HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
> + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> + MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
> + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
> + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> + ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
> +
> + #
> + # Entry point
> + #
> + StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
> +
> + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> + StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
> + ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
> + CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
> + PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf
> +
> + # ARM PL011 UART Driver
> + PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
> + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
> + SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
> +
> + StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
> +
> + #
> + # It is not possible to prevent the ARM compiler for generic intrinsic functions.
> + # This library provides the instrinsic functions generate by a given compiler.
> + # And NULL mean link this library into all ARM images.
> + #
> + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> +
> +[LibraryClasses.common.MM_STANDALONE]
> + HobLib|StandaloneMmPkg/Library/StandaloneMmHobLib/StandaloneMmHobLib.inf
> + MmServicesTableLib|MdePkg/Library/StandaloneMmServicesTableLib/StandaloneMmServicesTableLib.inf
> + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmMemoryAllocationLib/StandaloneMmMemoryAllocationLib.inf
> +
> +################################################################################
> +#
> +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> +#
> +################################################################################
> +[PcdsFixedAtBuild]
> + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
> + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
> + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
> +
> + ## PL011 - Serial Terminal
> + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60040000
> + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
> +
> + gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x2
> +
> +###################################################################################################
> +#
> +# Components Section - list of the modules and components that will be processed by compilation
> +# tools and the EDK II tools to generate PE32/PE32+/Coff image files.
> +#
> +# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
> +# into firmware volume images. This section is just a list of modules to compile from
> +# source into UEFI-compliant binaries.
> +# It is the FDF file that contains information on combining binary files into firmware
> +# volume images, whose concept is beyond UEFI and is described in PI specification.
> +# Binary modules do not need to be listed in this section, as they should be
> +# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
> +# Logo (Logo.bmp), and etc.
> +# There may also be modules listed in this section that are not required in the FDF file,
> +# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
> +# generated for it, but the binary will not be put into any firmware volume.
> +#
> +###################################################################################################
> +[Components.common]
> + #
> + # MM Core
> + #
> + StandaloneMmPkg/Core/StandaloneMmCore.inf
> + StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> +
> +###################################################################################################
> +#
> +# BuildOptions Section - Define the module specific tool chain flags that should be used as
> +# the default flags for a module. These flags are appended to any
> +# standard flags that are defined by the build process. They can be
> +# applied for any modules or only those modules with the specific
> +# module style (EDK or EDKII) specified in [Components] section.
> +#
> +###################################################################################################
> +[BuildOptions.AARCH64]
> + GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
> diff --git a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> index c35e3ed44054..b61ae1891233 100644
> --- a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> +++ b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> @@ -21,10 +21,10 @@
>
> [FD.SBSA_FLASH0]
> BaseAddress = 0x00000000
> -Size = 0x00200000
> +Size = 0x00400000
> ErasePolarity = 1
> BlockSize = 0x00001000
> -NumBlocks = 0x200
> +NumBlocks = 0x400
>
> ################################################################################
> #
> @@ -47,7 +47,7 @@ [FD.SBSA_FLASH0]
> FILE = Platform/Qemu/Sbsa/bl1.bin
>
> # and FIP (BL2 + BL31)
> -0x00008000|0x00020000
> +0x00008000|0x00300000
> FILE = Platform/Qemu/Sbsa/fip.bin
>
> ################################################################################
> diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> new file mode 100644
> index 000000000000..a1acefcfb0a7
> --- /dev/null
> +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> @@ -0,0 +1,93 @@
> +#
> +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +
> +################################################################################
> +#
> +# FD Section
> +# The [FD] Section is made up of the definition statements and a
> +# description of what goes into the Flash Device Image. Each FD section
> +# defines one flash "device" image. A flash device image may be one of
> +# the following: Removable media bootable image (like a boot floppy
> +# image,) an Option ROM image (that would be "flashed" into an add-in
> +# card,) a System "Flash" image (that would be burned into a system's
> +# flash) or an Update ("Capsule") image that will be used to update and
> +# existing system flash.
> +#
> +################################################################################
> +
> +[FD.STANDALONE_MM]
> +BaseAddress = 0x20001000|gArmTokenSpaceGuid.PcdFdBaseAddress
> +Size = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (14MiB).
> +ErasePolarity = 1
> +
> +BlockSize = 0x00001000
> +NumBlocks = 0x0e00
> +
> +0x00000000|0x00280000
> +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> +FV = FVMAIN_COMPACT
> +
> +[FV.FVMAIN_COMPACT]
> +FvAlignment = 16
> +ERASE_POLARITY = 1
> +MEMORY_MAPPED = TRUE
> +STICKY_WRITE = TRUE
> +LOCK_CAP = TRUE
> +LOCK_STATUS = TRUE
> +WRITE_DISABLED_CAP = TRUE
> +WRITE_ENABLED_CAP = TRUE
> +WRITE_STATUS = TRUE
> +WRITE_LOCK_CAP = TRUE
> +WRITE_LOCK_STATUS = TRUE
> +READ_DISABLED_CAP = TRUE
> +READ_ENABLED_CAP = TRUE
> +READ_STATUS = TRUE
> +READ_LOCK_CAP = TRUE
> +READ_LOCK_STATUS = TRUE
> +
> + INF StandaloneMmPkg/Core/StandaloneMmCore.inf
> + INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> +
> +################################################################################
> +#
> +# Rules are use with the [FV] section's module INF type to define
> +# how an FFS file is created for a given INF file. The following Rule are the default
> +# rules for the different module type. User can add the customized rules to define the
> +# content of the FFS file.
> +#
> +################################################################################
> +
> +
> +############################################################################
> +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
> +############################################################################
> +#
> +#[Rule.Common.DXE_DRIVER]
> +# FILE DRIVER = $(NAMED_GUID) {
> +# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> +# COMPRESS PI_STD {
> +# GUIDED {
> +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> +# UI STRING="$(MODULE_NAME)" Optional
> +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> +# }
> +# }
> +# }
> +#
> +############################################################################
> +
> +[Rule.Common.MM_CORE_STANDALONE]
> + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
> + PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> + }
> +
> +[Rule.Common.MM_STANDALONE]
> + FILE MM_STANDALONE = $(NAMED_GUID) {
> + SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> + UI STRING="$(MODULE_NAME)" Optional
> + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> + }
> --
> 2.17.1
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#72293): https://edk2.groups.io/g/devel/message/72293
Mute This Topic: https://groups.io/mt/80990864/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list