[edk2-devel] [PATCH 4/5] StandaloneMmPkg: fix pointer/int casts against 32bit architectures
Yao, Jiewen
jiewen.yao at intel.com
Wed May 5 02:10:41 UTC 2021
Acked-by: Jiewen Yao <Jiewen.yao at intel.com>
Need ARM expert to comment if it is OK to refer AArch64 for ARM?
Thank you
Yao Jiewen
> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Etienne
> Carriere
> Sent: Tuesday, May 4, 2021 11:21 PM
> To: devel at edk2.groups.io
> Cc: Achin Gupta <achin.gupta at arm.com>; Ard Biesheuvel
> <ardb+tianocore at kernel.org>; Yao, Jiewen <jiewen.yao at intel.com>; Leif
> Lindholm <leif at nuviainc.com>; Sami Mujawar <sami.mujawar at arm.com>;
> Sughosh Ganu <sughosh.ganu at linaro.org>; Etienne Carriere
> <etienne.carriere at linaro.org>
> Subject: [edk2-devel] [PATCH 4/5] StandaloneMmPkg: fix pointer/int casts
> against 32bit architectures
>
> Use intermediate (UINTN) cast when casting int from/to pointer. This
> is needed as UINT64 values cast from/to 32bit pointer for 32bit
> architectures.
>
> Cc: Achin Gupta <achin.gupta at arm.com>
> Cc: Ard Biesheuvel <ardb+tianocore at kernel.org>
> Cc: Jiewen Yao <jiewen.yao at intel.com>
> Cc: Leif Lindholm <leif at nuviainc.com>
> Cc: Sami Mujawar <sami.mujawar at arm.com>
> Cc: Sughosh Ganu <sughosh.ganu at linaro.org>
> Signed-off-by: Etienne Carriere <etienne.carriere at linaro.org>
> ---
> StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
> | 8 ++++----
>
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHobL
> ist.c | 14 +++++++-------
>
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/Standalone
> MmCoreEntryPoint.c | 2 +-
> 3 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git
> a/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
> b/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
> index 6884095c49..d4590bcd19 100644
> ---
> a/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
> +++
> b/StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.c
> @@ -164,8 +164,8 @@ StandaloneMmCpuInitialize (
>
> // Share the entry point of the CPU driver
> DEBUG ((DEBUG_INFO, "Sharing Cpu Driver EP *0x%lx = 0x%lx\n",
> - (UINT64) CpuDriverEntryPointDesc->ArmTfCpuDriverEpPtr,
> - (UINT64) PiMmStandaloneArmTfCpuDriverEntry));
> + (UINTN) CpuDriverEntryPointDesc->ArmTfCpuDriverEpPtr,
> + (UINTN) PiMmStandaloneArmTfCpuDriverEntry));
> *(CpuDriverEntryPointDesc->ArmTfCpuDriverEpPtr) =
> PiMmStandaloneArmTfCpuDriverEntry;
>
> // Find the descriptor that contains the whereabouts of the buffer for
> @@ -180,8 +180,8 @@ StandaloneMmCpuInitialize (
> return Status;
> }
>
> - DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalStart - 0x%lx\n", (UINT64)
> NsCommBufMmramRange->PhysicalStart));
> - DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalSize - 0x%lx\n", (UINT64)
> NsCommBufMmramRange->PhysicalSize));
> + DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalStart - 0x%lx\n", (UINTN)
> NsCommBufMmramRange->PhysicalStart));
> + DEBUG ((DEBUG_INFO, "mNsCommBuffer.PhysicalSize - 0x%lx\n", (UINTN)
> NsCommBufMmramRange->PhysicalSize));
>
> CopyMem (&mNsCommBuffer, NsCommBufMmramRange,
> sizeof(EFI_MMRAM_DESCRIPTOR));
> DEBUG ((DEBUG_INFO, "mNsCommBuffer: 0x%016lx - 0x%lx\n",
> mNsCommBuffer.CpuStart, mNsCommBuffer.PhysicalSize));
> diff --git
> a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHo
> bList.c
> b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHo
> bList.c
> index e8fb96bd6e..4d4cf3d5ff 100644
> ---
> a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHo
> bList.c
> +++
> b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/CreateHo
> bList.c
> @@ -72,14 +72,14 @@ CreateHobListFromBootInfo (
>
> // Create a hoblist with a PHIT and EOH
> HobStart = HobConstructor (
> - (VOID *) PayloadBootInfo->SpMemBase,
> + (VOID *) (UINTN) PayloadBootInfo->SpMemBase,
> (UINTN) PayloadBootInfo->SpMemLimit - PayloadBootInfo-
> >SpMemBase,
> - (VOID *) PayloadBootInfo->SpHeapBase,
> - (VOID *) (PayloadBootInfo->SpHeapBase + PayloadBootInfo-
> >SpHeapSize)
> + (VOID *) (UINTN) PayloadBootInfo->SpHeapBase,
> + (VOID *) (UINTN) (PayloadBootInfo->SpHeapBase + PayloadBootInfo-
> >SpHeapSize)
> );
>
> // Check that the Hoblist starts at the bottom of the Heap
> - ASSERT (HobStart == (VOID *) PayloadBootInfo->SpHeapBase);
> + ASSERT (HobStart == (VOID *) (UINTN) PayloadBootInfo->SpHeapBase);
>
> // Build a Boot Firmware Volume HOB
> BuildFvHob (PayloadBootInfo->SpImageBase, PayloadBootInfo->SpImageSize);
> @@ -190,9 +190,9 @@ CreateHobListFromBootInfo (
> MmramRanges[3].RegionState = EFI_CACHEABLE | EFI_ALLOCATED;
>
> // Base and size of heap memory shared by all cpus
> - MmramRanges[4].PhysicalStart = (EFI_PHYSICAL_ADDRESS) HobStart;
> - MmramRanges[4].CpuStart = (EFI_PHYSICAL_ADDRESS) HobStart;
> - MmramRanges[4].PhysicalSize = HobStart->EfiFreeMemoryBottom -
> (EFI_PHYSICAL_ADDRESS) HobStart;
> + MmramRanges[4].PhysicalStart = (EFI_PHYSICAL_ADDRESS) (UINTN) HobStart;
> + MmramRanges[4].CpuStart = (EFI_PHYSICAL_ADDRESS) (UINTN) HobStart;
> + MmramRanges[4].PhysicalSize = HobStart->EfiFreeMemoryBottom -
> (EFI_PHYSICAL_ADDRESS) (UINTN) HobStart;
> MmramRanges[4].RegionState = EFI_CACHEABLE | EFI_ALLOCATED;
>
> // Base and size of heap memory shared by all cpus
> diff --git
> a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/Standalon
> eMmCoreEntryPoint.c
> b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/Standalon
> eMmCoreEntryPoint.c
> index 6c50f470aa..b445d6942e 100644
> ---
> a/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/Standalon
> eMmCoreEntryPoint.c
> +++
> b/StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/AArch64/Standalon
> eMmCoreEntryPoint.c
> @@ -328,7 +328,7 @@ _ModuleEntryPoint (
>
> // Locate PE/COFF File information for the Standalone MM core module
> Status = LocateStandaloneMmCorePeCoffData (
> - (EFI_FIRMWARE_VOLUME_HEADER *) PayloadBootInfo->SpImageBase,
> + (EFI_FIRMWARE_VOLUME_HEADER *) (UINTN) PayloadBootInfo-
> >SpImageBase,
> &TeData,
> &TeDataSize
> );
> --
> 2.17.1
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#74756): https://edk2.groups.io/g/devel/message/74756
Mute This Topic: https://groups.io/mt/82580249/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list