[edk2-devel] [PATCH 1/1] MdeModulePkg: Fix various typos
Wu, Hao A
hao.a.wu at intel.com
Wed May 5 23:46:00 UTC 2021
Reviewed-by: Hao A Wu <hao.a.wu at intel.com>
Best Regards,
Hao Wu
> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Rebecca
> Cran
> Sent: Wednesday, May 5, 2021 11:05 PM
> To: devel at edk2.groups.io; Wang, Jian J <jian.j.wang at intel.com>; Wu, Hao A
> <hao.a.wu at intel.com>
> Cc: Rebecca Cran <rebecca at nuviainc.com>
> Subject: [edk2-devel] [PATCH 1/1] MdeModulePkg: Fix various typos
>
> Fix various typos throughout MdeModulePkg.
>
> Signed-off-by: Rebecca Cran <rebecca at nuviainc.com>
> ---
> MdeModulePkg/MdeModulePkg.dec | 6 ++--
>
> MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDev
> iceSupportDxe.inf | 2 +-
> MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
> | 2 +-
> MdeModulePkg/Universal/EbcDxe/EbcDxe.inf | 2 +-
> MdeModulePkg/Core/Dxe/Image/Image.c | 2 +-
> MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptExecute.c
> | 32 ++++++++++----------
>
> MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDev
> iceSupport.uni | 2 +-
> MdeModulePkg/Library/FileExplorerLib/FileExplorerString.uni |
> 2 +-
> MdeModulePkg/MdeModulePkg.uni | 8 ++---
> MdeModulePkg/Universal/DriverSampleDxe/DriverSample.uni
> | 2 +-
> MdeModulePkg/Universal/DriverSampleDxe/VfrStrings.uni |
> 8 ++---
> MdeModulePkg/Universal/EbcDxe/EbcDxe.uni | 2 +-
> 12 files changed, 35 insertions(+), 35 deletions(-)
>
> diff --git a/MdeModulePkg/MdeModulePkg.dec
> b/MdeModulePkg/MdeModulePkg.dec index 148395511034..8d3838391516
> 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -1360,7 +1360,7 @@ [PcdsFixedAtBuild, PcdsPatchableInModule]
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000
> 000|UINT64|0x00001048
>
> ## PCI Serial Device Info. It is an array of Device, Function, and Power
> Management
> - # information that describes the path that contains zero or more PCI to PCI
> briges
> + # information that describes the path that contains zero or more PCI
> + to PCI bridges
> # followed by a PCI serial device. Each array entry is 4-bytes in length. The
> # first byte is the PCI Device Number, then second byte is the PCI Function
> Number,
> # and the last two bytes are the offset to the PCI power management
> capabilities @@ -1413,7 +1413,7 @@ [PcdsFixedAtBuild,
> PcdsPatchableInModule]
> gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b,
> 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1,
> 0x1d }|VOID*|0x0001006b
>
> ## This PCD points to the formset GUID of the driver health management form
> - # The form will be popped up by BDS core when there are Configuration
> Required driver health intances.
> + # The form will be popped up by BDS core when there are Configuration
> Required driver health instances.
> # Platform can customize the PCD to point to different formset.
> # @Prompt Driver Health Management Form
> gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4,
> 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d,
> 0x90, 0xf0 }|VOID*|0x0001006c @@ -2016,7 +2016,7 @@ [PcdsFixedAtBuild,
> PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
> # @Prompt Enable Capsule In Ram support.
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleInRamSupport|TRUE|BOOLEAN
> |0x0000002e
>
> - ## Full device path of plaform specific device to store Capsule On Disk temp
> relocation file.<BR>
> + ## Full device path of platform specific device to store Capsule On
> + Disk temp relocation file.<BR>
> # If this PCD is set, Capsule On Disk temp relocation file will be stored in the
> device specified
> # by this PCD, instead of the EFI System Partition that stores capsule image file.
> # @Prompt Capsule On Disk relocation device path.
> diff --git
> a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciD
> eviceSupportDxe.inf
> b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciD
> eviceSupportDxe.inf
> index c4caac907949..8e08eb9b0e53 100644
> ---
> a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciD
> eviceSupportDxe.inf
> +++
> b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatibleP
> +++ ciDeviceSupportDxe.inf
> @@ -1,7 +1,7 @@
> ## @file
> # PCI Incompatible device support module template.
> #
> -# Installs EFI PCI Incompatible Device Support protocol and includes one
> incompatile
> +# Installs EFI PCI Incompatible Device Support protocol and includes
> +one incompatible
> # pci devices list template.
> #
> # Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR> diff --git
> a/MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
> b/MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
> index a277f641da42..ca515207c442 100644
> --- a/MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
> +++ b/MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf
> @@ -2,7 +2,7 @@
> # This is a sample HII driver.
> #
> # This driver shows how HII protocol, VFR and UNI files are used to create a HII
> -# driver which can be dipslayed and configured by a UEFI HII Form Browser.
> +# driver which can be displayed and configured by a UEFI HII Form Browser.
> #
> # Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR> # diff --
> git a/MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
> b/MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
> index a38700df566f..8f5fcbeb826c 100644
> --- a/MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
> +++ b/MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
> @@ -1,5 +1,5 @@
> ## @file
> -# Module that produces EBC Interprete and EBC Debug Support protocols.
> +# Module that produces EBC Interpreter and EBC Debug Support protocols.
> #
> # This module implements EFI Byte Code (EBC) Virtual Machine that can provide
> # platform and processor-independent mechanisms for loading and executing
> EFI diff --git a/MdeModulePkg/Core/Dxe/Image/Image.c
> b/MdeModulePkg/Core/Dxe/Image/Image.c
> index d86da89ee704..641a5715b112 100644
> --- a/MdeModulePkg/Core/Dxe/Image/Image.c
> +++ b/MdeModulePkg/Core/Dxe/Image/Image.c
> @@ -470,7 +470,7 @@ GetPeCoffImageFixLoadingAssignedAddress(
> if (ValueInSectionHeader != 0) {
> //
> // When the feature is configured as load module at fixed absolute address,
> the ImageAddress field of ImageContext
> - // hold the spcified address. If the feature is configured as load module at
> fixed offset, ImageAddress hold an offset
> + // hold the specified address. If the feature is configured as
> + load module at fixed offset, ImageAddress hold an offset
> // relative to top address
> //
> if ((INT64)PcdGet64(PcdLoadModuleAtFixAddressEnable) < 0) { diff --git
> a/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptExecute.c
> b/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptExecute.c
> index df775678197b..038dd20b9020 100644
> --- a/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptExecute.c
> +++ b/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptExecute.c
> @@ -369,7 +369,7 @@ ScriptIoWrite (
> return EFI_SUCCESS;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_IO_WRITE OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_IO_WRITE OP code.
>
> @param Script Pointer to the node which is to be interpreted.
>
> @@ -598,7 +598,7 @@ ScriptMemoryWrite (
> return EFI_SUCCESS;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_MEM_WRITE OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_MEM_WRITE OP code.
>
> @param[in] Script Pointer to the node which is to be interpreted.
>
> @@ -859,7 +859,7 @@ ScriptPciCfgWrite (
> return ScriptPciCfg2Write (Width, 0, Address, Count, Buffer); }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE
> OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE
> OP code.
>
> @param Script The pointer of typed node in boot script table
>
> @@ -887,7 +887,7 @@ BootScriptExecutePciCfgWrite (
> return ScriptPciCfgWrite (Width, Address, Count, Buffer); }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_IO_READ_WRITE OP
> code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_IO_READ_WRITE OP
> code.
>
> @param Script The pointer of typed node in boot script table
> @param AndMask Mask value for 'and' operation @@ -931,7 +931,7 @@
> BootScriptExecuteIoReadWrite (
> return Status;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_MEM_READ_WRITE
> OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_MEM_READ_WRITE OP
> code.
>
> @param Script The pointer of typed node in boot script table
> @param AndMask Mask value for 'and' operation
> @@ -975,7 +975,7 @@ BootScriptExecuteMemoryReadWrite (
> return Status;
> }
> /**
> - Interprete the boot script node with
> EFI_BOOT_SCRIPT_PCI_CFG_READ_WRITE OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_PCI_CFG_READ_WRITE
> OP code.
>
> @param Script The pointer of typed node in boot script table
> @param AndMask Mask value for 'and' operation @@ -1023,7 +1023,7 @@
> BootScriptExecutePciCfgReadWrite (
> return Status;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_SMBUS_EXECUTE OP
> code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_SMBUS_EXECUTE OP
> code.
>
> @param Script The pointer of typed node in boot script table
>
> @@ -1054,7 +1054,7 @@ BootScriptExecuteSmbusExecute (
> );
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_STALL OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_STALL OP code.
>
> @param Script The pointer of typed node in boot script table
>
> @@ -1075,7 +1075,7 @@ BootScriptExecuteStall (
> return EFI_SUCCESS;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_DISPATCH OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_DISPATCH OP code.
>
> @param Script The pointer of typed node in boot script table
> @retval EFI_SUCCESS The operation was executed successfully @@ -1099,7
> +1099,7 @@ BootScriptExecuteDispatch (
> return Status;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_DISPATCH_2 OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_DISPATCH_2 OP code.
>
> @param Script The pointer of typed node in boot script table
> @retval EFI_SUCCESS The operation was executed successfully @@ -1124,7
> +1124,7 @@ BootScriptExecuteDispatch2 (
> return Status;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_MEM_POLL OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_MEM_POLL OP code.
>
> @param Script The pointer of typed node in boot script table
> @param AndMask Mask value for 'and' operation @@ -1325,7 +1325,7 @@
> CheckAndOrMask (
> return;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_IO_POLL OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_IO_POLL OP code.
>
> @param Script The pointer of typed node in boot script table
> @param AndMask Mask value for 'and' operation @@ -1382,7 +1382,7 @@
> BootScriptExecuteIoPoll (
> }
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE
> OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE
> OP code.
>
> @param Script The pointer of S3 boot script
>
> @@ -1415,7 +1415,7 @@ BootScriptExecutePciCfg2Write (
>
>
> /**
> - Interprete the boot script node with
> EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE OP code.
> + Interpret the boot script node with
> EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE OP code.
>
> @param Script The pointer of S3 boot script
> @param AndMask Mask value for 'and' operation
> @@ -1463,7 +1463,7 @@ BootScriptExecutePciCfg2ReadWrite (
> return Status;
> }
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG_POLL OP
> code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG_POLL OP
> code.
>
> @param Script The pointer of S3 boot script
> @param AndMask Mask value for 'and' operation
> @@ -1522,7 +1522,7 @@ BootScriptPciCfgPoll ( }
>
> /**
> - Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL
> OP code.
> + Interpret the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL OP
> code.
>
> @param Script The pointer of S3 Boot Script
> @param AndMask Mask value for 'and' operation
> diff --git
> a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciD
> eviceSupport.uni
> b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciD
> eviceSupport.uni
> index f34c68c18bcb..ec9cdddc8745 100644
> ---
> a/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciD
> eviceSupport.uni
> +++
> b/MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatibleP
> +++ ciDeviceSupport.uni
> @@ -1,7 +1,7 @@
> // /** @file
> // PCI Incompatible device support module template.
> //
> -// Installs EFI PCI Incompatible Device Support protocol and includes one
> incompatile
> +// Installs EFI PCI Incompatible Device Support protocol and includes
> +one incompatible
> // pci devices list template.
> //
> // Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR> diff --git
> a/MdeModulePkg/Library/FileExplorerLib/FileExplorerString.uni
> b/MdeModulePkg/Library/FileExplorerLib/FileExplorerString.uni
> index 52e5eec5f325..070cdf38ea11 100644
> --- a/MdeModulePkg/Library/FileExplorerLib/FileExplorerString.uni
> +++ b/MdeModulePkg/Library/FileExplorerLib/FileExplorerString.uni
> @@ -9,7 +9,7 @@
> //
> // Abstract:
> //
> -// String definitions for file exporer library.
> +// String definitions for file explorer library.
> //
> // Revision History:
> //
> diff --git a/MdeModulePkg/MdeModulePkg.uni
> b/MdeModulePkg/MdeModulePkg.uni index ef9f4d97b98f..27889a728058
> 100644
> --- a/MdeModulePkg/MdeModulePkg.uni
> +++ b/MdeModulePkg/MdeModulePkg.uni
> @@ -313,7 +313,7 @@
> #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdSerialPciDeviceInfo_PROMPT
> #language en-US "PCI Serial Device Info"
>
> #string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdSerialPciDeviceInfo_HELP
> #language en-US "PCI Serial Device Info. It is an array of Device, Function, and
> Power Management\n"
> - "information that describes the
> path that contains zero or more PCI to PCI briges\n"
> + "information that describes
> the path that contains zero or more PCI to PCI bridges\n"
> "followed by a PCI serial device.
> Each array entry is 4-bytes in length. The\n"
> "first byte is the PCI Device
> Number, then second byte is the PCI Function Number,\n"
> "and the last two bytes are the
> offset to the PCI power management capabilities\n"
> @@ -880,7 +880,7 @@
> #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdDriverHealthConfigureForm_PRO
> MPT #language en-US "Driver Health Management Form"
>
> #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdDriverHealthConfigureForm_HELP
> #language en-US "This PCD points to the formset GUID of the driver health
> management form\n"
> - "The form will be popped up
> by BDS core when there are Configuration Required driver health intances.\n"
> + "The form will be popped
> up by BDS core when there are Configuration Required driver health
> instances.\n"
> "Platform can customize the
> PCD to point to different formset."
>
> #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdSetupVideoHorizontalResolution_
> PROMPT #language en-US "Video Horizontal Resolution of Text Setup"
> @@ -1173,9 +1173,9 @@
> " TRUE - Capsule In Ram is
> supported.<BR>"
> " FALSE - Capsule In Ram is not
> supported."
>
> -#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdCodRelocationDevPath_PROMPT
> #language en-US "Capsule On Disk relacation device path."
> +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdCodRelocationDevPath_PROMPT
> #language en-US "Capsule On Disk relocation device path."
>
> -#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdCodRelocationDevPath_HELP
> #language en-US "Full device path of plaform specific device to store Capsule
> On Disk temp relocation file.<BR>"
> +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdCodRelocationDevPath_HELP
> #language en-US "Full device path of platform specific device to store Capsule
> On Disk temp relocation file.<BR>"
> "If this PCD is set, Capsule On
> Disk temp relocation file will be stored in the device specified by this PCD,
> instead of the EFI System Partition that stores capsule image file."
>
> #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdNullPointerDetectionPropertyMas
> k_PROMPT #language en-US "Enable NULL pointer detection"
> diff --git a/MdeModulePkg/Universal/DriverSampleDxe/DriverSample.uni
> b/MdeModulePkg/Universal/DriverSampleDxe/DriverSample.uni
> index e7f16c41849b..92cd5a1cbc21 100644
> --- a/MdeModulePkg/Universal/DriverSampleDxe/DriverSample.uni
> +++ b/MdeModulePkg/Universal/DriverSampleDxe/DriverSample.uni
> @@ -2,7 +2,7 @@
> // This is a sample HII driver.
> //
> // This driver shows how HII protocol, VFR and UNI files are used to create a HII
> -// driver which can be dipslayed and configured by a UEFI HII Form Browser.
> +// driver which can be displayed and configured by a UEFI HII Form Browser.
> //
> // Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR> // diff -
> -git a/MdeModulePkg/Universal/DriverSampleDxe/VfrStrings.uni
> b/MdeModulePkg/Universal/DriverSampleDxe/VfrStrings.uni
> index 9587e935a6ed..8a3e286bec9f 100644
> --- a/MdeModulePkg/Universal/DriverSampleDxe/VfrStrings.uni
> +++ b/MdeModulePkg/Universal/DriverSampleDxe/VfrStrings.uni
> @@ -267,12 +267,12 @@
> #language fr-FR ""
> #string STR_SUBMITTED_CALLBACK_TEST_PROMPT #language en-US
> "Submitted callback test"
> #language fr-FR "Submitted callback test"
> -#string STR_SUBMITTED_CALLBACK_TEST_HELP #language en-US
> "Change the value and press F10 to submmit will pop up a dialogue to show
> SUBMITTED Callback has been triggered"
> - #language fr-FR "Change the value and press F10
> to submmit will pop up a dialogue to show SUBMITTED Callback has been
> triggered"
> +#string STR_SUBMITTED_CALLBACK_TEST_HELP #language en-US
> "Change the value and press F10 to submit will pop up a dialogue to show
> SUBMITTED Callback has been triggered"
> + #language fr-FR "Change the value and press F10
> to submit will pop up a dialogue to show SUBMITTED Callback has been
> triggered"
> #string STR_POPUP_TEST_PROMPT #language en-US "Select it to
> invoke Hii Popup Protocol"
> #language fr-FR "Select it to invoke Hii Popup
> Protocol"
> -#string STR_POPUP_TEST_HELP #language en-US "Select this
> question will pop up a message box, then user can decide whether exit curret
> form or not"
> - #language fr-FR "Select this question will pop up a
> message box, then user can decide whether exit curret form or not"
> +#string STR_POPUP_TEST_HELP #language en-US "Select this
> question will pop up a message box, then user can decide whether exit current
> form or not"
> + #language fr-FR "Select this question will pop up a
> message box, then user can decide whether exit current form or not"
> #string STR_POPUP_STRING #language en-US "Are you sure to
> exit current form?"
> #language fr-FR "Are you sure to exit current
> form?"
> //
> diff --git a/MdeModulePkg/Universal/EbcDxe/EbcDxe.uni
> b/MdeModulePkg/Universal/EbcDxe/EbcDxe.uni
> index 746d8b911835..cbe0c3f1cc8c 100644
> --- a/MdeModulePkg/Universal/EbcDxe/EbcDxe.uni
> +++ b/MdeModulePkg/Universal/EbcDxe/EbcDxe.uni
> @@ -1,5 +1,5 @@
> // /** @file
> -// Module that produces EBC Interprete and EBC Debug Support protocols.
> +// Module that produces EBC Interpreter and EBC Debug Support protocols.
> //
> // This module implements EFI Byte Code (EBC) Virtual Machine that can
> provide // platform and processor-independent mechanisms for loading and
> executing EFI
> --
> 2.26.2
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#74781): https://edk2.groups.io/g/devel/message/74781
Mute This Topic: https://groups.io/mt/82606565/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list