[edk2-devel] [PATCH] UefiCpuPkg/MpInitLib: Allocate a separate SEV-ES AP reset stack area
Lendacky, Thomas
thomas.lendacky at amd.com
Tue May 11 20:50:24 UTC 2021
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3324
The SEV-ES stacks currently share a page with the reset code and data.
Separate the SEV-ES stacks from the reset vector code and data to avoid
possible stack overflows from overwriting the code and/or data.
When SEV-ES is enabled, invoke the GetWakeupBuffer() routine a second time
to allocate a new area, below the reset vector and data.
Both the PEI and DXE versions of GetWakeupBuffer() are changed to track
the previous reset buffer allocation in order to ensure that the new
buffer allocation is below the previous allocation.
Fixes: 7b7508ad784d16a5208c8d12dff43aef6df0835b
Cc: Eric Dong <eric.dong at intel.com>
Cc: Ray Ni <ray.ni at intel.com>
Cc: Laszlo Ersek <lersek at redhat.com>
Cc: Rahul Kumar <rahul1.kumar at intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky at amd.com>
---
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 12 ++++-
UefiCpuPkg/Library/MpInitLib/MpLib.c | 48 +++++++++++++-------
UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 14 ++++--
3 files changed, 54 insertions(+), 20 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
index 7839c249760e..fdfa0755d37a 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
@@ -29,6 +29,11 @@ VOID *mReservedApLoopFunc = NULL;
UINTN mReservedTopOfApStack;
volatile UINT32 mNumberToFinish = 0;
+//
+// Begin wakeup buffer allocation below 0x88000
+//
+STATIC EFI_PHYSICAL_ADDRESS mWakeupBuffer = 0x88000;
+
/**
Enable Debug Agent to support source debugging on AP function.
@@ -102,7 +107,7 @@ GetWakeupBuffer (
// LagacyBios driver depends on CPU Arch protocol which guarantees below
// allocation runs earlier than LegacyBios driver.
//
- StartAddress = 0x88000;
+ StartAddress = mWakeupBuffer;
Status = gBS->AllocatePages (
AllocateMaxAddress,
MemoryType,
@@ -112,6 +117,11 @@ GetWakeupBuffer (
ASSERT_EFI_ERROR (Status);
if (EFI_ERROR (Status)) {
StartAddress = (EFI_PHYSICAL_ADDRESS) -1;
+ } else {
+ //
+ // Next wakeup buffer allocation must be below this allocation
+ //
+ mWakeupBuffer = StartAddress;
}
DEBUG ((DEBUG_INFO, "WakeupBufferStart = %x, WakeupBufferSize = %x\n",
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index dc2a54aa31e8..a76dae437606 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -1164,20 +1164,6 @@ GetApResetVectorSize (
AddressMap->SwitchToRealSize +
sizeof (MP_CPU_EXCHANGE_INFO);
- //
- // The AP reset stack is only used by SEV-ES guests. Do not add to the
- // allocation if SEV-ES is not enabled.
- //
- if (PcdGetBool (PcdSevEsIsEnabled)) {
- //
- // Stack location is based on APIC ID, so use the total number of
- // processors for calculating the total stack area.
- //
- Size += AP_RESET_STACK_SIZE * PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
-
- Size = ALIGN_VALUE (Size, CPU_STACK_ALIGNMENT);
- }
-
return Size;
}
@@ -1207,9 +1193,39 @@ AllocateResetVector (
CpuMpData->AddressMap.ModeTransitionOffset
);
//
- // The reset stack starts at the end of the buffer.
+ // The AP reset stack is only used by SEV-ES guests. Do not allocate it
+ // if SEV-ES is not enabled.
//
- CpuMpData->SevEsAPResetStackStart = CpuMpData->WakeupBuffer + ApResetVectorSize;
+ if (PcdGetBool (PcdSevEsIsEnabled)) {
+ UINTN ApResetStackSize;
+
+ //
+ // Stack location is based on ProcessorNumber, so use the total number
+ // of processors for calculating the total stack area.
+ //
+ ApResetStackSize = AP_RESET_STACK_SIZE *
+ PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
+
+ //
+ // Invoke GetWakeupBuffer a second time to allocate the stack area
+ // below 1MB. The returned buffer will be page aligned and sized and
+ // below the previously allocated buffer.
+ //
+ CpuMpData->SevEsAPResetStackStart = GetWakeupBuffer (ApResetStackSize);
+
+ //
+ // Check to be sure that the "allocate below" behavior hasn't changed.
+ // This will also catch a failed allocation, as "-1" is returned on
+ // failure.
+ //
+ if (CpuMpData->SevEsAPResetStackStart >= CpuMpData->WakeupBuffer) {
+ DEBUG ((DEBUG_ERROR,
+ "SEV-ES AP reset stack is not below wakeup buffer\n"));
+
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+ }
+ }
}
BackupAndPrepareWakeupBuffer (CpuMpData);
}
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
index 3989bd6a7a9f..4d09e89b4128 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
@@ -11,6 +11,8 @@
#include <Guid/S3SmmInitDone.h>
#include <Ppi/ShadowMicrocode.h>
+STATIC UINT64 mWakeupBuffer = BASE_1MB;
+
/**
S3 SMM Init Done notification function.
@@ -220,11 +222,11 @@ GetWakeupBuffer (
// Need memory under 1MB to be collected here
//
WakeupBufferEnd = Hob.ResourceDescriptor->PhysicalStart + Hob.ResourceDescriptor->ResourceLength;
- if (WakeupBufferEnd > BASE_1MB) {
+ if (WakeupBufferEnd > mWakeupBuffer) {
//
- // Wakeup buffer should be under 1MB
+ // Wakeup buffer should be under 1MB and under the previous one
//
- WakeupBufferEnd = BASE_1MB;
+ WakeupBufferEnd = mWakeupBuffer;
}
while (WakeupBufferEnd > WakeupBufferSize) {
//
@@ -244,6 +246,12 @@ GetWakeupBuffer (
}
DEBUG ((DEBUG_INFO, "WakeupBufferStart = %x, WakeupBufferSize = %x\n",
WakeupBufferStart, WakeupBufferSize));
+
+ //
+ // Next wakeup buffer allocation must be below this allocation
+ //
+ mWakeupBuffer = WakeupBufferStart;
+
return (UINTN)WakeupBufferStart;
}
}
--
2.31.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#75033): https://edk2.groups.io/g/devel/message/75033
Mute This Topic: https://groups.io/mt/82757192/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list