[edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible Serial Port Subtypes to DBG2

Mon May 24 08:50:43 UTC 2021

Hi Liming,

pon., 24 maj 2021 o 10:42 gaoliming <gaoliming at byosoft.com.cn> napisał(a):
>
> You can run BaseTools\Scripts\PatchCheck.py -1 to check the patch format.
>

Sure, I ran it prior to submission.

Best regards,
Marcin

> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: devel at edk2.groups.io <devel at edk2.groups.io> 代表 Sunny Wang
> > 发送时间: 2021年5月24日 11:21
> > 收件人: Marcin Wojtas <mw at semihalf.com>
> > 抄送: devel at edk2.groups.io; michael.d.kinney at intel.com;
> > leif at nuviainc.com; ardb+tianocore at kernel.org; Samer El-Haj-Mahmoud
> > <Samer.El-Haj-Mahmoud at arm.com>; gjb at semihalf.com;
> > upstream at semihalf.com; gaoliming at byosoft.com.cn; Sunny Wang
> > <Sunny.Wang at arm.com>
> > 主题: Re: [edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible
> > Serial Port Subtypes to DBG2
> >
> > Add Liming's new email.
> >
> > Hi Marcin,
> >
> > There seems no LF (0A).
> > 1. From the patch I got below in this email, several lines got merged into one
> > line.
> > >  #define
> > EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART
> > 0x000e #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_DCC
> > 0x000f #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
> > 0x0010+#define
> > EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_16550_WITH_GAS
> > 0x0012 #define EFI_ACPI_DBG2_PORT_TYPE_1394
> > 0x8001 #define   EFI_ACPI_DBG2_PORT_SUBTYPE_1394_STANDARD
> > 0x0000 #define EFI_ACPI_DBG2_PORT_TYPE_USB
> >
> > 2. In
> > https://edk2.groups.io/g/devel/topic/patch_1_1_mdepkg_add_new/830249
> > 03?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,83024903, I saw "=0D"
> > appending to each line. I'm not sure if this is relevant.
> >
> > Moreover, I don't see #1 and #2 in another similar code change
> > https://edk2.groups.io/g/devel/message/75283?p=,,,20,0,0,0::relevance,,Md
> > ePkg%3A+Update+DBG2+and+SPCR+header+with+NVIDIA+16550+Subtype,2
> > 0,2,0,82919032.
> >
> > Of course, if this won't cause any issue with pushing the patch, I'm totally fine
> > with this.
> >
> > Reviewed-by: Sunny Wang <sunny.wang at arm.com>
> >
> >
> > Best Regards,
> > Sunny Wang
> >
> > -----Original Message-----
> > From: Marcin Wojtas <mw at semihalf.com>
> > Sent: Monday, May 24, 2021 10:21 AM
> > To: Sunny Wang <Sunny.Wang at arm.com>
> > Cc: devel at edk2.groups.io; michael.d.kinney at intel.com; leif at nuviainc.com;
> > ardb+tianocore at kernel.org; Samer El-Haj-Mahmoud
> > <Samer.El-Haj-Mahmoud at arm.com>; gjb at semihalf.com;
> > upstream at semihalf.com
> > Subject: Re: [edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible
> > Serial Port Subtypes to DBG2
> >
> > Hi Sunny,
> >
> >
> > pon., 24 maj 2021 o 04:09 Sunny Wang <Sunny.Wang at arm.com> napisał(a):
> > >
> > > Looks good, Marcin.
> > > However, it looks like something wrong with the line-ending. Could you
> > check if your line-ending setting is CR/LF? Did you use
> > /edk2/BaseTools/Scripts/PatchCheck.py tool to check your patch? If not, could
> > you use it? I expect this tool can catch the line-ending problem.
> >
> > The line endings are fine in my repo, I generated and sent the patch as usual.
> >
> > And of course prior to sending I ran PatchCheck.py - it complains only about
> > too long URL line in the commit message, but the line-endings are ok.
> >
> > $ python3
> > /home/mw/git/edk2-workspace/edk2/BaseTools/Scripts/PatchCheck.py -1
> > Checking git commit: HEAD
> > MdePkg: Add new 16550-compatible Serial Port Subtypes to DBG2 WARNING
> > - Line 9 of commit message is too long (91 >= 76).
> > [1]
> > https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-d
> > ebug-port-table
> > The commit message format passed all checks.
> > The code passed all checks.
> >
> > Do you check the line endings in a different way?
> >
> > Best regards,
> > Marcin
> >
> > >
> > > Best Regards,
> > > Sunny Wang
> > >
> > > -----Original Message-----
> > > From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Marcin
> > > Wojtas via groups.io
> > > Sent: Sunday, May 23, 2021 5:15 PM
> > > To: devel at edk2.groups.io
> > > Cc: liming.gao at intel.com; michael.d.kinney at intel.com;
> > > leif at nuviainc.com; ardb+tianocore at kernel.org; Samer El-Haj-Mahmoud
> > > <Samer.El-Haj-Mahmoud at arm.com>; Sunny Wang
> > <Sunny.Wang at arm.com>;
> > > gjb at semihalf.com; upstream at semihalf.com; Marcin Wojtas
> > > <mw at semihalf.com>
> > > Subject: [edk2-devel] [PATCH 1/1] MdePkg: Add new 16550-compatible
> > > Serial Port Subtypes to DBG2
> > >
> > > The Microsoft Debug Port Table 2 (DBG2) specification revision May 31,
> > > 2017 adds support for 16550-compatible Serial Port Subtype with
> > > parameters defined in Generic Address Structure (GAS) [1]
> > >
> > > Reflect that in the EDK2 headers.
> > >
> > > [1]
> > > https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi
> > > -debug-port-table
> > >
> > > Signed-off-by: Marcin Wojtas <mw at semihalf.com>
> > > ---
> > >  MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > | 1 +
> > >  MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h |
> > > 5 +++++
> > >  2 files changed, 6 insertions(+)
> > >
> > > diff --git a/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > > b/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > > index 3faa30b76a..9ccfc1b1ee 100644
> > > --- a/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > > +++ b/MdePkg/Include/IndustryStandard/DebugPort2Table.h
> > > @@ -47,6 +47,7 @@ typedef struct {
> > >  #define
> > EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_SBSA_GENERIC_UART
> > 0x000e #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_DCC
> > 0x000f #define   EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_BCM2835_UART
> > 0x0010+#define
> > EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_16550_WITH_GAS
> > 0x0012 #define EFI_ACPI_DBG2_PORT_TYPE_1394
> > 0x8001 #define   EFI_ACPI_DBG2_PORT_SUBTYPE_1394_STANDARD
> > 0x0000 #define EFI_ACPI_DBG2_PORT_TYPE_USB
> > 0x8002diff --git
> > a/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h
> > b/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h
> > > index 2066c7895e..7796796afe 100644
> > > ---
> > > a/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.h
> > > +++
> > b/MdePkg/Include/IndustryStandard/SerialPortConsoleRedirectionTable.
> > > +++ h
> > > @@ -100,6 +100,11 @@ typedef struct {
> > >  /// #define
> > EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_
> > BCM2835_UART              0x10 +///+/// 16550-compatible with
> > parameters defined in Generic Address Structure+///+#define
> > EFI_ACPI_SERIAL_PORT_CONSOLE_REDIRECTION_TABLE_INTERFACE_TYPE_
> > 16550_WITH_GAS            0x12+ // // Interrupt Type //--
> > > 2.29.0
> > >
> > >
> > >
> > > -=-=-=-=-=-=
> > > Groups.io Links: You receive all messages sent to this group.
> > > View/Reply Online (#75464):
> > > https://edk2.groups.io/g/devel/message/75464
> > > Mute This Topic: https://groups.io/mt/83024903/5985097
> > > Group Owner: devel+owner at edk2.groups.io
> > > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > [Sunny.Wang at arm.com]
> > > -=-=-=-=-=-=
> > >
> > >
> > > IMPORTANT NOTICE: The contents of this email and any attachments are
> > confidential and may also be privileged. If you are not the intended recipient,
> > please notify the sender immediately and do not disclose the contents to any
> > other person, use it for any purpose, or store or copy the information in any
> > medium. Thank you.
> > IMPORTANT NOTICE: The contents of this email and any attachments are
> > confidential and may also be privileged. If you are not the intended recipient,
> > please notify the sender immediately and do not disclose the contents to any
> > other person, use it for any purpose, or store or copy the information in any
> > medium. Thank you.
> >
> >
> >
> >
>
>
>
>
>
> 
>
>

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#75499): https://edk2.groups.io/g/devel/message/75499
Mute This Topic: https://groups.io/mt/83046510/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-