[edk2-devel] [PATCH 1/2] MdePkg: Standalone PCD driver
Zhiguang Liu
zhiguang.liu at intel.com
Tue May 25 01:09:39 UTC 2021
Hi Miki,
I want to fix the case where two binaries are built separately, and both want to use PCD feature.
For example, bootloader and payload want to have separate PCD data base.
Or two payloads both run at DXE phase, and they both need PCD but don't want to other payload to change PCD data.
This way, both PCD protocol instance is installed, and different payload will find its own PCD protocol by different GUID.
Thanks
Zhiguang
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney at intel.com>
> Sent: Tuesday, May 25, 2021 4:30 AM
> To: devel at edk2.groups.io; Liu, Zhiguang <zhiguang.liu at intel.com>; Kinney,
> Michael D <michael.d.kinney at intel.com>
> Cc: Liming Gao <gaoliming at byosoft.com.cn>
> Subject: RE: [edk2-devel] [PATCH 1/2] MdePkg: Standalone PCD driver
>
> Why do we need a new PCD?
>
> Can't we make this the default behavior to only install one instance?
>
> Thanks,
>
> Mike
>
> > -----Original Message-----
> > From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of
> > Zhiguang Liu
> > Sent: Monday, May 24, 2021 2:25 AM
> > To: devel at edk2.groups.io
> > Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Liming Gao
> > <gaoliming at byosoft.com.cn>
> > Subject: [edk2-devel] [PATCH 1/2] MdePkg: Standalone PCD driver
> >
> > Add a feature PCD to control if the PCD driver is build as standalone mode.
> > This way, two mode PCD driver won't share the data base.
> >
> > Cc: Michael D Kinney <michael.d.kinney at intel.com>
> > Cc: Liming Gao <gaoliming at byosoft.com.cn>
> > Signed-off-by: Zhiguang Liu <zhiguang.liu at intel.com>
> > ---
> > MdeModulePkg/Universal/PCD/Dxe/Pcd.c | 75
> +++++++++++++++++++++++++++++++++++++++++++++++++++------------
> ----------
> > --
> > MdeModulePkg/Universal/PCD/Dxe/Pcd.inf | 16 ++++++++++++----
> > MdeModulePkg/Universal/PCD/Dxe/Service.c | 7 ++++++-
> > MdePkg/Include/Protocol/Pcd.h | 5 -----
> > MdePkg/Include/Protocol/PcdInfo.h | 5 -----
> > MdePkg/Library/DxePcdLib/DxePcdLib.c | 24
> ++++++++++++++++++++----
> > MdePkg/Library/DxePcdLib/DxePcdLib.inf | 16 ++++++++++++----
> > MdePkg/Library/DxePcdLib/PayloadPcdLib.inf | 71
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++++++++++
> > MdePkg/MdePkg.dec | 12 ++++++++++++
> > 9 files changed, 184 insertions(+), 47 deletions(-)
> >
> > diff --git a/MdeModulePkg/Universal/PCD/Dxe/Pcd.c
> > b/MdeModulePkg/Universal/PCD/Dxe/Pcd.c
> > index cdb9b4fac1..dc9c4be022 100644
> > --- a/MdeModulePkg/Universal/PCD/Dxe/Pcd.c
> > +++ b/MdeModulePkg/Universal/PCD/Dxe/Pcd.c
> > @@ -129,34 +129,61 @@ PcdDxeInit (
> > //
> >
> > // Make sure the Pcd Protocol is not already installed in the
> > system
> >
> > //
> >
> > + if (FeaturePcdGet (PcdStandalonePcdDatabaseEnable)) {
> >
> > + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL,
> > + &gEdkiiPayloadStandalonePcdProtocolGuid);
> >
> > + BuildPcdDxeDataBase ();
> >
> >
> >
> > - ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gPcdProtocolGuid);
> >
> > + //
> >
> > + // Install PCD_PROTOCOL to handle dynamic type PCD
> >
> > + // Install EFI_PCD_PROTOCOL to handle dynamicEx type PCD
> >
> > + //
> >
> > + Status = gBS->InstallMultipleProtocolInterfaces (
> >
> > + &mPcdHandle,
> >
> > + &gEdkiiPayloadStandalonePcdProtocolGuid, &mPcdInstance,
> >
> > + &gEdkiiEfiPayloadStandalonePcdProtocolGuid,
> > + &mEfiPcdInstance,
> >
> > + NULL
> >
> > + );
> >
> > + ASSERT_EFI_ERROR (Status);
> >
> >
> >
> > - BuildPcdDxeDataBase ();
> >
> > + //
> >
> > + // Install GET_PCD_INFO_PROTOCOL to handle dynamic type PCD
> >
> > + // Install EFI_GET_PCD_INFO_PROTOCOL to handle dynamicEx type PCD
> >
> > + //
> >
> > + Status = gBS->InstallMultipleProtocolInterfaces (
> >
> > + &mPcdHandle,
> >
> > + &gEdkiiPayloadGetStandalonePcdInfoProtocolGuid,
> &mGetPcdInfoInstance,
> >
> > +
> > + &gEdkiiEfiPayloadGetStandalonePcdInfoProtocolGuid,
> > + &mEfiGetPcdInfoInstance,
> >
> > + NULL
> >
> > + );
> >
> > + ASSERT_EFI_ERROR (Status);
> >
> > + } else {
> >
> > + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gPcdProtocolGuid);
> >
> > + BuildPcdDxeDataBase ();
> >
> >
> >
> > - //
> >
> > - // Install PCD_PROTOCOL to handle dynamic type PCD
> >
> > - // Install EFI_PCD_PROTOCOL to handle dynamicEx type PCD
> >
> > - //
> >
> > - Status = gBS->InstallMultipleProtocolInterfaces (
> >
> > - &mPcdHandle,
> >
> > - &gPcdProtocolGuid, &mPcdInstance,
> >
> > - &gEfiPcdProtocolGuid, &mEfiPcdInstance,
> >
> > - NULL
> >
> > - );
> >
> > - ASSERT_EFI_ERROR (Status);
> >
> > + //
> >
> > + // Install PCD_PROTOCOL to handle dynamic type PCD
> >
> > + // Install EFI_PCD_PROTOCOL to handle dynamicEx type PCD
> >
> > + //
> >
> > + Status = gBS->InstallMultipleProtocolInterfaces (
> >
> > + &mPcdHandle,
> >
> > + &gPcdProtocolGuid, &mPcdInstance,
> >
> > + &gEfiPcdProtocolGuid, &mEfiPcdInstance,
> >
> > + NULL
> >
> > + );
> >
> > + ASSERT_EFI_ERROR (Status);
> >
> >
> >
> > - //
> >
> > - // Install GET_PCD_INFO_PROTOCOL to handle dynamic type PCD
> >
> > - // Install EFI_GET_PCD_INFO_PROTOCOL to handle dynamicEx type PCD
> >
> > - //
> >
> > - Status = gBS->InstallMultipleProtocolInterfaces (
> >
> > - &mPcdHandle,
> >
> > - &gGetPcdInfoProtocolGuid, &mGetPcdInfoInstance,
> >
> > - &gEfiGetPcdInfoProtocolGuid, &mEfiGetPcdInfoInstance,
> >
> > - NULL
> >
> > - );
> >
> > - ASSERT_EFI_ERROR (Status);
> >
> > + //
> >
> > + // Install GET_PCD_INFO_PROTOCOL to handle dynamic type PCD
> >
> > + // Install EFI_GET_PCD_INFO_PROTOCOL to handle dynamicEx type PCD
> >
> > + //
> >
> > + Status = gBS->InstallMultipleProtocolInterfaces (
> >
> > + &mPcdHandle,
> >
> > + &gGetPcdInfoProtocolGuid, &mGetPcdInfoInstance,
> >
> > + &gEfiGetPcdInfoProtocolGuid,
> > + &mEfiGetPcdInfoInstance,
> >
> > + NULL
> >
> > + );
> >
> > + ASSERT_EFI_ERROR (Status);
> >
> > + }
> >
> >
> >
> > //
> >
> > // Register callback function upon VariableLockProtocol
> >
> > diff --git a/MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
> > b/MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
> > index eb9f757f14..f3e704f083 100644
> > --- a/MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
> > +++ b/MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
> > @@ -329,10 +329,15 @@
> > gEfiMdeModulePkgTokenSpaceGuid ## SOMETIMES_CONSUMES
> ## GUID
> >
> >
> >
> > [Protocols]
> >
> > - gPcdProtocolGuid ## PRODUCES
> >
> > - gEfiPcdProtocolGuid ## PRODUCES
> >
> > - gGetPcdInfoProtocolGuid ## SOMETIMES_PRODUCES
> >
> > - gEfiGetPcdInfoProtocolGuid ## SOMETIMES_PRODUCES
> >
> > + gPcdProtocolGuid ## PRODUCES
> >
> > + gEfiPcdProtocolGuid ## PRODUCES
> >
> > + gGetPcdInfoProtocolGuid ## SOMETIMES_PRODUCES
> >
> > + gEfiGetPcdInfoProtocolGuid ## SOMETIMES_PRODUCES
> >
> > +
> >
> > + gEdkiiPayloadStandalonePcdProtocolGuid ## PRODUCES
> >
> > + gEdkiiEfiPayloadStandalonePcdProtocolGuid ## PRODUCES
> >
> > + gEdkiiPayloadGetStandalonePcdInfoProtocolGuid ##
> SOMETIMES_PRODUCES
> >
> > + gEdkiiEfiPayloadGetStandalonePcdInfoProtocolGuid ##
> > + SOMETIMES_PRODUCES
> >
> > ## NOTIFY
> >
> > ## SOMETIMES_CONSUMES
> >
> > gEdkiiVariableLockProtocolGuid
> >
> > @@ -342,6 +347,9 @@
> > gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64 ##
> SOMETIMES_CONSUMES
> >
> > gEfiMdeModulePkgTokenSpaceGuid.PcdSetNvStoreDefaultId ##
> > SOMETIMES_CONSUMES
> >
> >
> >
> > +[FeaturePcd]
> >
> > + gEfiMdePkgTokenSpaceGuid.PcdStandalonePcdDatabaseEnable ##
> CONSUMES
> >
> > +
> >
> > [Depex]
> >
> > TRUE
> >
> >
> >
> > diff --git a/MdeModulePkg/Universal/PCD/Dxe/Service.c
> > b/MdeModulePkg/Universal/PCD/Dxe/Service.c
> > index ea7edc3cbb..fe16ba713b 100644
> > --- a/MdeModulePkg/Universal/PCD/Dxe/Service.c
> > +++ b/MdeModulePkg/Universal/PCD/Dxe/Service.c
> > @@ -861,7 +861,12 @@ BuildPcdDxeDataBase (
> > CopyMem (PcdDxeDb, mPcdDatabase.DxeDb, mPcdDatabase.DxeDb-
> >Length);
> >
> > mPcdDatabase.DxeDb = PcdDxeDb;
> >
> >
> >
> > - GuidHob = GetFirstGuidHob (&gPcdDataBaseHobGuid);
> >
> > + if (FeaturePcdGet (PcdStandalonePcdDatabaseEnable)) {
> >
> > + GuidHob = NULL;
> >
> > + } else {
> >
> > + GuidHob = GetFirstGuidHob (&gPcdDataBaseHobGuid);
> >
> > + }
> >
> > +
> >
> > if (GuidHob != NULL) {
> >
> >
> >
> > //
> >
> > diff --git a/MdePkg/Include/Protocol/Pcd.h
> > b/MdePkg/Include/Protocol/Pcd.h index 9cd1a998f8..cfa6ac2360 100644
> > --- a/MdePkg/Include/Protocol/Pcd.h
> > +++ b/MdePkg/Include/Protocol/Pcd.h
> > @@ -17,11 +17,6 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > #ifndef __PCD_H__
> >
> > #define __PCD_H__
> >
> >
> >
> > -extern EFI_GUID gPcdProtocolGuid;
> >
> > -
> >
> > -#define PCD_PROTOCOL_GUID \
> >
> > - { 0x11b34006, 0xd85b, 0x4d0a, { 0xa2, 0x90, 0xd5, 0xa5, 0x71, 0x31,
> > 0xe, 0xf7 } }
> >
> > -
> >
> > #define PCD_INVALID_TOKEN_NUMBER ((UINTN) 0)
> >
> >
> >
> >
> >
> > diff --git a/MdePkg/Include/Protocol/PcdInfo.h
> > b/MdePkg/Include/Protocol/PcdInfo.h
> > index b0ec7f6770..5691215c42 100644
> > --- a/MdePkg/Include/Protocol/PcdInfo.h
> > +++ b/MdePkg/Include/Protocol/PcdInfo.h
> > @@ -19,11 +19,6 @@
> > #ifndef __PCD_INFO_H__
> >
> > #define __PCD_INFO_H__
> >
> >
> >
> > -extern EFI_GUID gGetPcdInfoProtocolGuid;
> >
> > -
> >
> > -#define GET_PCD_INFO_PROTOCOL_GUID \
> >
> > - { 0x5be40f57, 0xfa68, 0x4610, { 0xbb, 0xbf, 0xe9, 0xc5, 0xfc, 0xda,
> > 0xd3, 0x65 } }
> >
> > -
> >
> > ///
> >
> > /// The forward declaration for GET_PCD_INFO_PROTOCOL.
> >
> > ///
> >
> > diff --git a/MdePkg/Library/DxePcdLib/DxePcdLib.c
> > b/MdePkg/Library/DxePcdLib/DxePcdLib.c
> > index 2accaeda2c..8a61486832 100644
> > --- a/MdePkg/Library/DxePcdLib/DxePcdLib.c
> > +++ b/MdePkg/Library/DxePcdLib/DxePcdLib.c
> > @@ -43,7 +43,11 @@ GetPiPcdProtocol (
> > // PI Pcd protocol defined in PI 1.2 vol3 should be installed
> > before the module
> >
> > // access DynamicEx type PCD.
> >
> > //
> >
> > - Status = gBS->LocateProtocol (&gEfiPcdProtocolGuid, NULL, (VOID **)
> &mPiPcd);
> >
> > + if (FeaturePcdGet (PcdStandalonePcdDatabaseEnable)) {
> >
> > + Status = gBS->LocateProtocol
> > + (&gEdkiiEfiPayloadStandalonePcdProtocolGuid, NULL, (VOID **)
> > + &mPiPcd);
> >
> > + } else {
> >
> > + Status = gBS->LocateProtocol (&gEfiPcdProtocolGuid, NULL, (VOID
> > + **) &mPiPcd);
> >
> > + }
> >
> > ASSERT_EFI_ERROR (Status);
> >
> > ASSERT (mPiPcd != NULL);
> >
> > }
> >
> > @@ -68,7 +72,11 @@ GetPcdProtocol (
> > // PCD protocol need to be installed before the module access Dynamic
> type PCD.
> >
> > // But dynamic type PCD is not required in PI 1.2 specification.
> >
> > //
> >
> > - Status = gBS->LocateProtocol (&gPcdProtocolGuid, NULL, (VOID
> **)&mPcd);
> >
> > + if (FeaturePcdGet (PcdStandalonePcdDatabaseEnable)) {
> >
> > + Status = gBS->LocateProtocol
> > + (&gEdkiiPayloadStandalonePcdProtocolGuid, NULL, (VOID **)&mPcd);
> >
> > + } else {
> >
> > + Status = gBS->LocateProtocol (&gPcdProtocolGuid, NULL, (VOID
> > + **)&mPcd);
> >
> > + }
> >
> > ASSERT_EFI_ERROR (Status);
> >
> > ASSERT (mPcd != NULL);
> >
> > }
> >
> > @@ -88,7 +96,11 @@ GetPiPcdInfoProtocolPointer (
> > EFI_STATUS Status;
> >
> >
> >
> > if (mPiPcdInfo == NULL) {
> >
> > - Status = gBS->LocateProtocol (&gEfiGetPcdInfoProtocolGuid, NULL,
> (VOID **)&mPiPcdInfo);
> >
> > + if (FeaturePcdGet (PcdStandalonePcdDatabaseEnable)) {
> >
> > + Status = gBS->LocateProtocol
> > + (&gEdkiiEfiPayloadGetStandalonePcdInfoProtocolGuid, NULL, (VOID
> > + **)&mPiPcdInfo);
> >
> > + } else{
> >
> > + Status = gBS->LocateProtocol (&gEfiGetPcdInfoProtocolGuid,
> > + NULL, (VOID **)&mPiPcdInfo);
> >
> > + }
> >
> > ASSERT_EFI_ERROR (Status);
> >
> > ASSERT (mPiPcdInfo != NULL);
> >
> > }
> >
> > @@ -108,7 +120,11 @@ GetPcdInfoProtocolPointer (
> > EFI_STATUS Status;
> >
> >
> >
> > if (mPcdInfo == NULL) {
> >
> > - Status = gBS->LocateProtocol (&gGetPcdInfoProtocolGuid, NULL, (VOID
> **)&mPcdInfo);
> >
> > + if (FeaturePcdGet (PcdStandalonePcdDatabaseEnable)) {
> >
> > + Status = gBS->LocateProtocol
> > + (&gEdkiiPayloadGetStandalonePcdInfoProtocolGuid, NULL, (VOID
> > + **)&mPcdInfo);
> >
> > + } else {
> >
> > + Status = gBS->LocateProtocol (&gGetPcdInfoProtocolGuid, NULL,
> > + (VOID **)&mPcdInfo);
> >
> > + }
> >
> > ASSERT_EFI_ERROR (Status);
> >
> > ASSERT (mPcdInfo != NULL);
> >
> > }
> >
> > diff --git a/MdePkg/Library/DxePcdLib/DxePcdLib.inf
> > b/MdePkg/Library/DxePcdLib/DxePcdLib.inf
> > index 3d4d21b442..59d9fe4f11 100644
> > --- a/MdePkg/Library/DxePcdLib/DxePcdLib.inf
> > +++ b/MdePkg/Library/DxePcdLib/DxePcdLib.inf
> > @@ -53,10 +53,18 @@
> >
> >
> >
> >
> > [Protocols]
> >
> > - gPcdProtocolGuid ## SOMETIMES_CONSUMES
> >
> > - gEfiPcdProtocolGuid ## CONSUMES
> >
> > - gGetPcdInfoProtocolGuid ## SOMETIMES_CONSUMES
> >
> > - gEfiGetPcdInfoProtocolGuid ## SOMETIMES_CONSUMES
> >
> > + gPcdProtocolGuid ## SOMETIMES_CONSUMES
> >
> > + gEfiPcdProtocolGuid ## SOMETIMES_CONSUMES
> >
> > + gGetPcdInfoProtocolGuid ## SOMETIMES_CONSUMES
> >
> > + gEfiGetPcdInfoProtocolGuid ## SOMETIMES_CONSUMES
> >
> > +
> >
> > + gEdkiiPayloadStandalonePcdProtocolGuid ##
> SOMETIMES_CONSUMES
> >
> > + gEdkiiEfiPayloadStandalonePcdProtocolGuid ##
> SOMETIMES_CONSUMES
> >
> > + gEdkiiPayloadGetStandalonePcdInfoProtocolGuid ##
> SOMETIMES_CONSUMES
> >
> > + gEdkiiEfiPayloadGetStandalonePcdInfoProtocolGuid ##
> > + SOMETIMES_CONSUMES
> >
> > +
> >
> > +[FeaturePcd]
> >
> > + gEfiMdePkgTokenSpaceGuid.PcdStandalonePcdDatabaseEnable ##
> CONSUMES
> >
> >
> >
> > [Depex.common.DXE_DRIVER, Depex.common.DXE_RUNTIME_DRIVER,
> > Depex.common.DXE_SAL_DRIVER, Depex.common.DXE_SMM_DRIVER]
> >
> > gEfiPcdProtocolGuid
> >
> > diff --git a/MdePkg/Library/DxePcdLib/PayloadPcdLib.inf
> > b/MdePkg/Library/DxePcdLib/PayloadPcdLib.inf
> > new file mode 100644
> > index 0000000000..e61296e11a
> > --- /dev/null
> > +++ b/MdePkg/Library/DxePcdLib/PayloadPcdLib.inf
> > @@ -0,0 +1,71 @@
> > +## @file
> >
> > +# Instance of PCD Library using PCD Protocol.
> >
> > +#
> >
> > +# There are two PCD protocols as follows:
> >
> > +# 1) PCD_PROTOCOL
> >
> > +# It is EDKII implementation which support Dynamic/DynamicEx Pcds.
> >
> > +# 2) EFI_PCD_PROTOCOL
> >
> > +# It is defined by PI specification 1.2, Vol 3 which only support
> dynamicEx
> >
> > +# type Pcd.
> >
> > +#
> >
> > +# For dynamicEx type PCD, it is compatible between PCD_PROTOCOL and
> EFI_PCD_PROTOCOL.
> >
> > +#
> >
> > +# This library instance uses the PCD_PROTOCOL to handle dynamic PCD
> > +request and use
> >
> > +# EFI_PCD_PROTOCOL to handle dynamicEx type PCD.
> >
> > +#
> >
> > +# Note: A driver of type DXE_RUNTIME_DRIVER and DXE_SMM_DRIVER
> can
> > +only use this DxePcdLib
> >
> > +# in their initialization without any issues to access Dynamic and
> > +DynamicEx PCD. They can't
> >
> > +# access Dynamic and DynamicEx PCD in the implementation of runtime
> services and SMI handlers.
> >
> > +# Because EFI_PCD_PROTOCOL is DXE protocol that is not available in OS
> runtime phase.
> >
> > +#
> >
> > +# Copyright (c) 2007 - 2018, Intel Corporation. All rights
> > +reserved.<BR>
> >
> > +#
> >
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> > +#
> >
> > +#
> >
> > +##
> >
> > +
> >
> > +[Defines]
> >
> > + INF_VERSION = 0x00010005
> >
> > + BASE_NAME = DxePcdLib
> >
> > + MODULE_UNI_FILE = DxePcdLib.uni
> >
> > + FILE_GUID = f9af2f38-09e2-4ff1-b661-5d1c19d9f75c
> >
> > + MODULE_TYPE = DXE_DRIVER
> >
> > + VERSION_STRING = 1.0
> >
> > + LIBRARY_CLASS = PcdLib|DXE_CORE DXE_DRIVER
> DXE_RUNTIME_DRIVER DXE_SMM_DRIVER SMM_CORE UEFI_APPLICATION
> > UEFI_DRIVER
> >
> > +
> >
> > +#
> >
> > +# VALID_ARCHITECTURES = IA32 X64 EBC
> >
> > +#
> >
> > +
> >
> > +[Sources]
> >
> > + DxePcdLib.c
> >
> > +
> >
> > +
> >
> > +[Packages]
> >
> > + MdePkg/MdePkg.dec
> >
> > +
> >
> > +
> >
> > +[LibraryClasses]
> >
> > + BaseMemoryLib
> >
> > + UefiBootServicesTableLib
> >
> > + DebugLib
> >
> > +
> >
> > +
> >
> > +[Protocols]
> >
> > + gPcdProtocolGuid ## SOMETIMES_CONSUMES
> >
> > + gEfiPcdProtocolGuid ## SOMETIMES_CONSUMES
> >
> > + gGetPcdInfoProtocolGuid ## SOMETIMES_CONSUMES
> >
> > + gEfiGetPcdInfoProtocolGuid ## SOMETIMES_CONSUMES
> >
> > +
> >
> > + gEdkiiPayloadStandalonePcdProtocolGuid ##
> SOMETIMES_CONSUMES
> >
> > + gEdkiiEfiPayloadStandalonePcdProtocolGuid ##
> SOMETIMES_CONSUMES
> >
> > + gEdkiiPayloadGetStandalonePcdInfoProtocolGuid ##
> SOMETIMES_CONSUMES
> >
> > + gEdkiiEfiPayloadGetStandalonePcdInfoProtocolGuid ##
> > + SOMETIMES_CONSUMES
> >
> > +
> >
> > +[FeaturePcd]
> >
> > + gEfiMdePkgTokenSpaceGuid.PcdStandalonePcdDatabaseEnable ##
> CONSUMES
> >
> > +
> >
> > +[Depex.common.DXE_DRIVER, Depex.common.DXE_RUNTIME_DRIVER,
> > +Depex.common.DXE_SAL_DRIVER, Depex.common.DXE_SMM_DRIVER]
> >
> > + gEdkiiEfiPayloadStandalonePcdProtocolGuid
> >
> > +
> >
> > diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec index
> > b49f88d8e1..44f60e2086 100644
> > --- a/MdePkg/MdePkg.dec
> > +++ b/MdePkg/MdePkg.dec
> > @@ -1000,6 +1000,12 @@
> > ## Include/Protocol/PcdInfo.h
> >
> > gGetPcdInfoProtocolGuid = { 0x5be40f57, 0xfa68, 0x4610, { 0xbb, 0xbf,
> 0xe9, 0xc5, 0xfc, 0xda, 0xd3, 0x65 } }
> >
> >
> >
> > + ## Payload Standalone Pcd Protocol
> >
> > + gEdkiiPayloadStandalonePcdProtocolGuid = {0x8ef6ff48, 0x2260,
> 0x5407, {0x0d, 0x18, 0x2e, 0x2c, 0xaa, 0x7d,
> > 0xc9, 0x1f}}
> >
> > + gEdkiiEfiPayloadStandalonePcdProtocolGuid = {0x7e50c422, 0xae76,
> 0xbdc9, {0x16, 0x66, 0xca, 0x67, 0x95, 0x04,
> > 0x4d, 0xea}}
> >
> > + gEdkiiPayloadGetStandalonePcdInfoProtocolGuid = {0xd7214c03,
> 0x27e0, 0x5b35, {0xd5, 0xb1, 0xeb, 0x1a, 0x50, 0x14,
> > 0x5e, 0x15}}
> >
> > + gEdkiiEfiPayloadGetStandalonePcdInfoProtocolGuid = {0x1039ecdf,
> > + 0x5908, 0xf76c, {0x51, 0xf9, 0xae, 0x09, 0xc5, 0xa9,
> > 0x68, 0x9e}}
> >
> > +
> >
> > #
> >
> > # Protocols defined in PI1.0.
> >
> > #
> >
> > @@ -1945,6 +1951,12 @@
> > # @Prompt Validate ORDERED_COLLECTION structure
> >
> >
> >
> gEfiMdePkgTokenSpaceGuid.PcdValidateOrderedCollection|FALSE|BOOLEA
> N|0x
> > 0000002a
> >
> >
> >
> > + ## Indicates if the standalone PCD database is enabled for
> > + Payload.<BR><BR>
> >
> > + # TRUE - Enable tandalone PCD database is enabled for Payload.<BR>
> >
> > + # FALSE - Disable tandalone PCD database is enabled for Payload.<BR>
> >
> > + # @Prompt Enable tandalone PCD database is enabled for Payload.
> >
> > +
> > +
> gEfiMdePkgTokenSpaceGuid.PcdStandalonePcdDatabaseEnable|FALSE|BOO
> LEA
> > + N|0x0000002e
> >
> > +
> >
> > [PcdsFixedAtBuild]
> >
> > ## Status code value for indicating a watchdog timer has expired.
> >
> > # EFI_COMPUTING_UNIT_HOST_PROCESSOR |
> EFI_CU_HP_EC_TIMER_EXPIRED
> >
> > --
> > 2.30.0.windows.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#75502):
> > https://edk2.groups.io/g/devel/message/75502
> > Mute This Topic: https://groups.io/mt/83046935/1643496
> > Group Owner: devel+owner at edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > [michael.d.kinney at intel.com] -=-=-=-=-=-=
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#75550): https://edk2.groups.io/g/devel/message/75550
Mute This Topic: https://groups.io/mt/83046935/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list