[edk2-devel] [PATCH RFC v2 04/28] MdePkg: Define the Page State Change VMGEXIT structures
Laszlo Ersek
lersek at redhat.com
Tue May 4 12:33:50 UTC 2021
On 04/30/21 13:51, Brijesh Singh wrote:
> BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
>
> The Page State Change NAE exit will be used by the SEV-SNP guest to
> request a page state change using the GHCB protocol. See the GHCB
> spec section 4.1.6 and 2.3.1 for more detail on the structure
> definitions.
>
> Cc: James Bottomley <jejb at linux.ibm.com>
> Cc: Min Xu <min.m.xu at intel.com>
> Cc: Jiewen Yao <jiewen.yao at intel.com>
> Cc: Tom Lendacky <thomas.lendacky at amd.com>
> Cc: Jordan Justen <jordan.l.justen at intel.com>
> Cc: Ard Biesheuvel <ardb+tianocore at kernel.org>
> Cc: Laszlo Ersek <lersek at redhat.com>
> Cc: Erdem Aktas <erdemaktas at google.com>
> Signed-off-by: Brijesh Singh <brijesh.singh at amd.com>
> ---
> MdePkg/Include/Register/Amd/Fam17Msr.h | 15 ++++++++++
> MdePkg/Include/Register/Amd/Ghcb.h | 29 ++++++++++++++++++++
> 2 files changed, 44 insertions(+)
>
> diff --git a/MdePkg/Include/Register/Amd/Fam17Msr.h b/MdePkg/Include/Register/Amd/Fam17Msr.h
> index e19bd04b6c..432cee2feb 100644
> --- a/MdePkg/Include/Register/Amd/Fam17Msr.h
> +++ b/MdePkg/Include/Register/Amd/Fam17Msr.h
> @@ -58,6 +58,19 @@ typedef union {
> UINT64 GuestFrameNumber:52;
> } GhcbGpaRegister;
>
> + struct {
> + UINT64 Function:12;
> + UINT64 GuestFrameNumber:40;
> + UINT64 Operation:4;
> + UINT64 Reserved:8;
> + } SnpPageStateChangeRequest;
> +
> + struct {
> + UINT32 Function:12;
> + UINT32 Reserved:20;
> + UINT32 ErrorCode;
> + } SnpPageStateChangeResponse;
> +
> VOID *Ghcb;
>
This matches section 2.3.1 in rev 2.00.
> UINT64 GhcbPhysicalAddress;
> @@ -69,6 +82,8 @@ typedef union {
> #define GHCB_INFO_CPUID_RESPONSE 5
> #define GHCB_INFO_GHCB_GPA_REGISTER_REQUEST 18
> #define GHCB_INFO_GHCB_GPA_REGISTER_RESPONSE 19
> +#define GHCB_INFO_SNP_PAGE_STATE_CHANGE_REQUEST 20
> +#define GHCB_INFO_SNP_PAGE_STATE_CHANGE_RESPONSE 21
> #define GHCB_HYPERVISOR_FEATURES_REQUEST 128
> #define GHCB_HYPERVISOR_FEATURES_RESPONSE 129
> #define GHCB_INFO_TERMINATE_REQUEST 256
Matches section 2.3.1.
> diff --git a/MdePkg/Include/Register/Amd/Ghcb.h b/MdePkg/Include/Register/Amd/Ghcb.h
> index 2d64a4c28f..1e7c0daed3 100644
> --- a/MdePkg/Include/Register/Amd/Ghcb.h
> +++ b/MdePkg/Include/Register/Amd/Ghcb.h
> @@ -54,6 +54,7 @@
> #define SVM_EXIT_NMI_COMPLETE 0x80000003ULL
> #define SVM_EXIT_AP_RESET_HOLD 0x80000004ULL
> #define SVM_EXIT_AP_JUMP_TABLE 0x80000005ULL
> +#define SVM_EXIT_SNP_PAGE_STATE_CHANGE 0x80000010ULL
> #define SVM_EXIT_HYPERVISOR_FEATURES 0x8000FFFDULL
> #define SVM_EXIT_UNSUPPORTED 0x8000FFFFULL
>
Matches "Table 5. List of Supported Non-Automatic Events".
> @@ -160,4 +161,32 @@ typedef union {
> #define GHCB_HV_FEATURES_SNP_AP_CREATE (GHCB_HV_FEATURES_SNP | BIT1)
> #define GHCB_HV_FEATURES_SNP_RESTRICTED_INJECTION (GHCB_HV_FEATURES_SNP_AP_CREATE | BIT2)
> #define GHCB_HV_FEATURES_SNP_RESTRICTED_INJECTION_TIMER (GHCB_HV_FEATURES_SNP_RESTRICTED_INJECTION | BIT3)
> +
> +// SNP Page State Change
(1) Comment style.
> +#define SNP_PAGE_STATE_MAX_NPAGES 4095
> +#define SNP_PAGE_STATE_MAX_ENTRY 253
> +#define SNP_PAGE_STATE_PRIVATE 1
> +#define SNP_PAGE_STATE_SHARED 2
> +#define SNP_PAGE_STATE_PSMASH 3
> +#define SNP_PAGE_STATE_UNSMASH 4
(2) The PSMASH and UNSMASH operations are not documented in the rev 2.00
spec, in the GHCB MSR protocol. That's probably because PSMASH and
UNSMASH can only be defined in terms of 2MB pages, and
GHCB_INFO_SNP_PAGE_STATE_CHANGE_REQUEST is suitable only for individual,
4KB pages. I think it would be useful to point out somehow here that
PSMASH and UNSMASH are restricted to the GHCB shared area protocol
(perhaps extend the leading comment on this block of macros).
(3) I don't understand what "MAX_NPAGES" stands for (4095). The rest of
the series never uses the macro, and I can't associate it with anything
from the spec. If the macro is supposed to relate to the 4KB / 2MB page
smashing / splitting, then its replacement text should be 512. Unless
the macro corresponds to a definition in the spec, I think we should
drop it.
> +
> +typedef PACKED struct {
> + UINT64 CurrentPage:12;
> + UINT64 GuestFrameNumber:40;
> + UINT64 Op:4;
> + UINT64 PageSize:1;
> + UINT64 Rsvd: 7;
> +} SNP_PAGE_STATE_ENTRY;
> +
> +typedef PACKED struct {
> + UINT16 CurrentEntry;
> + UINT16 EndEntry;
> + UINT32 Rsvd;
> +} SNP_PAGE_STATE_HEADER;
(4) We tend to write
#pragma pack (1)
...
#pragma pack ()
rather than PACKED -- but anyway, is packing really necessary? "Natural
alignment" is required in edk2. I'm OK with packing, but I think the
pragma is the preferred form.
(5) Please spell out both "Rsvd" fields above as "Reserved".
(6) Stray space character in "Rsvd: 7".
(7) The field name "Op" is inconsistent with the other field name
"Operation".
(8) I think there is a bug (typo) in the rev 2.00 spec, in 4.1.6 "SNP
Page State Change": it says
... calculated from the supplied guest physical frame number (GFN) for
the requested page size (GPA = GFN << 12).
But, if you can choose 2MB page size in the request, then the (GPA = GFN
<< 12) formula is not g
(9) If my understanding of the spec is correct, "EndEntry" has
*inclusive* meaning. That's unusual. Any particular reason for not
making "EndEntry" exclusive (in the spec)?
> +
> +typedef struct {
> + SNP_PAGE_STATE_HEADER Header;
> + SNP_PAGE_STATE_ENTRY Entry[SNP_PAGE_STATE_MAX_ENTRY];
> +} SNP_PAGE_STATE_CHANGE_INFO;
> +
> #endif
>
Yes, this looks OK. Size is 2+2+4+253*8 = 2032 bytes, which matches the
size of GHCB.SharedBuffer.
(10) However, *if* you decide to declare SNP_PAGE_STATE_ENTRY and
SNP_PAGE_STATE_HEADER explicitly as packed, then you should do the same
for SNP_PAGE_STATE_CHANGE_INFO.
(11) Like I mentioned earlier, it's probably helpful if you start the
subject line with
MdePkg/Register/Amd: ...
on all of these MdePkg patches. If that becomes too tight, for some of
the MdePkg patches, then I suggest "MdePkg/Amd: ..." (i.e., drop
"Register").
Thanks
Laszlo
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#74728): https://edk2.groups.io/g/devel/message/74728
Mute This Topic: https://groups.io/mt/82479051/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list