[et-mgmt-tools] Booting Hangs on "Trying to Load: pxelinux.cfg/default"

[Michael DeHaan]

Slinky wrote:
> Make sure you have verbose enabled in /etc/xinetd.d/tftp
>
> ..
>         server_args             = -s -v -v -v /tftpboot
> ...

Regarding your other post about server locations, here's your problem, 
Mr. Slinky broke you :)

-s /tftpboot -vvv

You just set directory explicitly to "-v" :)


>
> You'll then see tftp hits in /var/log/messages. Example:
>
> /var/log/messages.3:May 13 09:12:47 islinky in.tftpd[3556]: RRQ from 
> 137.138.32.49 <http://137.138.32.49> filename tftpboot/dir/file.cbt
> /var/log/messages.3:May 13 09:12:47 islinky in.tftpd[3556]: sending 
> NAK (1, File not found) to 137.138.32.49 <http://137.138.32.49>
>
> It could just be some thing simple like you're dhcp points somewhere 
> but your tftp "files" are else where.
>
> HTH
> Slinky
>
>
> 2008/5/31 Ole Ersoy <ole.ersoy at gmail.com <mailto:ole.ersoy at gmail.com>>:
>
>     Any trouble shooting tips?  I used to get a "boot" menu prior to
>     adding a system...
>
>     TIA,
>     - Ole
>
>     _______________________________________________
>     et-mgmt-tools mailing list
>     et-mgmt-tools at redhat.com <mailto:et-mgmt-tools at redhat.com>
>     https://www.redhat.com/mailman/listinfo/et-mgmt-tools
>
>
>
>
> -- 
> Regards
> Dan
> ------------------------------------------------------------------------
>
> _______________________________________________
> et-mgmt-tools mailing list
> et-mgmt-tools at redhat.com
> https://www.redhat.com/mailman/listinfo/et-mgmt-tools