[et-mgmt-tools] Booting Hangs on "Trying to Load: pxelinux.cfg/default"

[Ole Ersoy]

Michael DeHaan wrote:
> Slinky wrote:
>> Make sure you have verbose enabled in /etc/xinetd.d/tftp
>>
>> ..
>>         server_args             = -s -v -v -v /tftpboot
>> ...
> 
> Regarding your other post about server locations, here's your problem, 
> Mr. Slinky broke you :)
> 
> -s /tftpboot -vvv
> 
> You just set directory explicitly to "-v" :)

Doh! OK - I should have realized that given that I started getting the -v message  right after :-).  I changed it back, and now cobbler is syncing fine.

Thanks,
- Ole


> 
> 
>>
>> You'll then see tftp hits in /var/log/messages. Example:
>>
>> /var/log/messages.3:May 13 09:12:47 islinky in.tftpd[3556]: RRQ from 
>> 137.138.32.49 <http://137.138.32.49> filename tftpboot/dir/file.cbt
>> /var/log/messages.3:May 13 09:12:47 islinky in.tftpd[3556]: sending 
>> NAK (1, File not found) to 137.138.32.49 <http://137.138.32.49>
>>
>> It could just be some thing simple like you're dhcp points somewhere 
>> but your tftp "files" are else where.
>>
>> HTH
>> Slinky
>>
>>
>> 2008/5/31 Ole Ersoy <ole.ersoy at gmail.com <mailto:ole.ersoy at gmail.com>>:
>>
>>     Any trouble shooting tips?  I used to get a "boot" menu prior to
>>     adding a system...
>>
>>     TIA,
>>     - Ole
>>
>>     _______________________________________________
>>     et-mgmt-tools mailing list
>>     et-mgmt-tools at redhat.com <mailto:et-mgmt-tools at redhat.com>
>>     https://www.redhat.com/mailman/listinfo/et-mgmt-tools
>>
>>
>>
>>
>> -- 
>> Regards
>> Dan
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> et-mgmt-tools mailing list
>> et-mgmt-tools at redhat.com
>> https://www.redhat.com/mailman/listinfo/et-mgmt-tools
> 
> _______________________________________________
> et-mgmt-tools mailing list
> et-mgmt-tools at redhat.com
> https://www.redhat.com/mailman/listinfo/et-mgmt-tools
>