[et-mgmt-tools] build over eth1

[Matt Baker]

>>>
>>> The system was added to cobbler using the following command:
>>>
>>> cobbler system add --profile=CentOS-5.1-x86_64 --interface=0 -- 
>>> ip=x..x.x.1 --mac=00:x:x:x:9A:F8 --gateway=x.x.x.254 -- 
>>> interface=1 --name=00:x:x:x:9A:F9
>>>
>> This is  fine, in fact, interface=0 is the default, so you don't  
>> need to specify it.   You can have any number of interfaces listed  
>> here (well, up to 8 currently), and you do not need to enter all  
>> of them into Cobbler, just the ones that you need to show up in  
>> the PXE Linux tree and possibly for DHCP reservations.
>>
>
> Following on from this, I am finding an issue which I cannot seem  
> to work out where I am going wrong.
>
> Issuing the command:
>
> # cobbler system add --name=test --profile=CentOS-5.1-x86_64 -- 
> mac=00:15:60:ED:9A:F8 --ip=119.252.19.1 --gateway=119.252.19.254 -- 
> interface=1 --mac=00:15:60:ED:9A:F9 --ip=10.2.25.1
>
>
> # cobbler system report
> system			: test
> profile			: CentOS-5.1-x86_64
> kernel options	: {}
> kickstart			: <<inherit>>
> ks metadata		: {}
> netboot enabled? : True
> owners			: ['admin']
> server			: <<inherit>>
> virt cpus			: <<inherit>>
> virt file size		: <<inherit>>
> virt path			: <<inherit>>
> virt ram			: <<inherit>>
> virt type			: <<inherit>>
> interface			: intf0
>   mac address	:
>   ip address		:
>   hostname		:
>   gateway		:
>   subnet			:
>   virt bridge		:
>   dhcp tag		:
> interface			: intf1
>   mac address	: 00:15:60:ED:9A:F9
>   ip address		: 10.2.25.1
>   hostname		:
>   gateway		: 119.252.19.254
>   subnet			:
>   virt bridge		:
>   dhcp tag		:
>
>


I have been trying to try a few different combinations, all with  
basically the same result. Until that it, I fired up the web  
interface to cobbler!
Entering the 2nd interface information via the web interface works  
fine as the system report below shows.
Has anyone managed to get more than one interface configured via the  
command line tool?

system           : test2
profile          : CentOS-5.1-x86_64
kernel options   : {}
kickstart        : <<inherit>>
ks metadata      : {}
netboot enabled? : True
owners           : ['admin']
server           : <<inherit>>
virt cpus        : <<inherit>>
virt file size   : <<inherit>>
virt path        : <<inherit>>
virt ram         : <<inherit>>
virt type        : <<inherit>>
interface        : intf0
   mac address    :
   ip address     : 119.252.19.2
   hostname       : test.com
   gateway        : 119.252.19.254
   subnet         : 255.255.255.0
   virt bridge    :
   dhcp tag       :
interface        : intf1
   mac address    : 00:15:60:ed:9a:f9
   ip address     : 10.1.25.45
   hostname       :
   gateway        :
    subnet         :
   virt bridge    :
   dhcp tag       :