Fedora Core 3 Update: radvd-0.7.3-1_FC3

Jason Vas Dias jvdias at redhat.com
Fri Feb 25 20:25:18 UTC 2005


Subject: Fedora Core 3 Update: radvd-0.7.3-1_FC3

---------------------------------------------------------------------
Fedora Update Notification
FEDORA-2005-177
2005-02-25
---------------------------------------------------------------------

Product     : Fedora Core 3
Name        : radvd
Version     : 0.7.3                      
Release     : 1_FC3                  
Summary     : A Router Advertisement daemon
Description :
radvd is the router advertisement daemon for IPv6.  It listens to router
solicitations and sends router advertisements as described in "Neighbor
Discovery for IP Version 6 (IPv6)" (RFC 2461).  With these advertisements
hosts can automatically configure their addresses and some other
parameters.  They also can choose a default router based on these
advertisements.

Install radvd if you are setting up IPv6 network and/or Mobile IPv6
services.

---------------------------------------------------------------------
Update Information:

Upgrade to new upstream version 0.7.3 .
---------------------------------------------------------------------
* Mon Feb 21 2005 Jason Vas Dias <jvdias at redhat.com> 0.7.3-1

- Upgrade to radvd-0.7.3
- add execshield -fPIE / -pie compile / link options

* Mon Feb 21 2005 Pekka Savola <pekkas at netcore.fi> 0.7.3-1

- 0.7.3.

* Mon Oct 28 2002 Pekka Savola <pekkas at netcore.fi>

- 0.7.2.

* Tue May  7 2002 Pekka Savola <pekkas at netcore.fi>

- remove '-g %{RADVD_GID}' when creating the user, which may be problematic
  if the user didn't exist before.

* Fri Apr 12 2002 Bernhard Rosenkraenzer <bero at redhat.com> 0.7.1-1

- 0.7.1 (bugfix release, #61023), fixes:
  - Check that forwarding is enabled when starting radvd
    (helps avoid odd problems) 
  - Check configuration file permissions (note: in setuid operation, must not
    be writable by the user.group) 
  - Cleanups and enhancements for radvdump
  - Ensure NULL-termination with strncpy even with overlong strings
    (non-criticals, but better safe than sorry) 
  - Update config.{guess,sub} to cope with some newer architectures 
  - Minor fixes and cleanups

* Mon Jan 14 2002 Pekka Savola <pekkas at netcore.fi>

- 0.7.1.

* Wed Jan  9 2002 Tim Powers <timp at redhat.com>

- automated rebuild

* Tue Jan  8 2002 Pekka Savola <pekkas at netcore.fi>

- Change 'reload' to signal HUP to radvd instead or restarting.

* Fri Dec 28 2001 Pekka Savola <pekkas at netcore.fi>

- License unfortunately is BSD *with* advertising clause, so to be pedantic,
  change License: to 'BSD-style'.

* Thu Nov 22 2001 Bernhard Rosenkraenzer <bero at redhat.com>

- 0.7.0

* Wed Nov 14 2001 Pekka Savola <pekkas at netcore.fi>

- spec file cleanups
- update to 0.7.0.

* Mon Jul  9 2001 Bernhard Rosenkraenzer <bero at redhat.com>

- initial Red Hat Linux build

* Sun Jun 24 2001 Pekka Savola <pekkas at netcore.fi>

- add a patch from USAGI for overflow, Copyright -> License.

* Wed Jun 20 2001 Pekka Savola <pekkas at netcore.fi>

- use /sbin/service.
- update to 0.6.2pl4.

* Sat Apr 28 2001 Pekka Savola <pekkas at netcore.fi>

- update to 0.6.2pl3.

* Wed Apr 11 2001 Pekka Savola <pekkas at netcore.fi>

- update to 0.6.2pl2.

* Wed Apr  4 2001 Pekka Savola <pekkas at netcore.fi>

- update to 0.62pl1.  Bye bye patches!
- Require: initscripts (should really be with a version providing IPv6)
- clean up the init script, make condrestart work properly
- Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.

* Sun Apr  1 2001 Pekka Savola <pekkas at netcore.fi>

- add patch to chroot (doesn't work well yet, as /proc is used directly)
- clean up droproot patch, drop the rights earlier; require user-writable
pidfile directory
- set up the pidfile directory at compile time.

* Sat Mar 31 2001 Pekka Savola <pekkas at netcore.fi>

- add select/kill signals patch from Nathan Lutchansky <lutchann at litech.org>.
- add address syntax checked fix from Marko Myllynen <myllynen at lut.fi>.
- add patch to check the pid file before fork.
- add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice
default one.
- add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.
- fix initscript NETWORKING_IPV6 check.

* Sun Mar 18 2001 Pekka Savola <pekkas at netcore.fi>

- add droproot patch, change to nobody by default (should use radvd:radvd or
the like, really).

* Mon Mar  5 2001 Tim Powers <timp at redhat.com>

- applied patch supplied by Pekka Savola in #30508
- made changes to initscript as per Pekka's suggestions

* Thu Feb 15 2001 Tim Powers <timp at redhat.com>

- needed -D_GNU_SOURCE to build properly

* Tue Feb  6 2001 Tim Powers <timp at redhat.com>

- use %configure and %makeinstall, just glob the manpages, cleans
  things up
- fixed initscript so that it can be internationalized in the future

* Fri Feb  2 2001 Pekka Savola <pekkas at netcore.fi>

- Create a single package(source) for glibc21 and glibc22 (automatic
Requires can handle this just fine).
- use %{_mandir} and friends
- add more flesh to %doc
- streamline %config file %attrs
- streamline init.d file a bit:
   * add a default chkconfig: (default to disable for security etc. reasons; 
     also, the default config isn't generic enough..)
   * add reload/condrestart
   * minor tweaks
   * missing: localization support (initscripts-5.60)
- use %initdir macro

* Thu Feb  1 2001 Lars Fenneberg <lf at elemental.net>

- updated to new release 0.6.2

* Thu Feb  1 2001 Marko Myllynen <myllynen at lut.fi>

- initial version, radvd version 0.6.1


---------------------------------------------------------------------
This update can be downloaded from:
  http://download.fedora.redhat.com/pub/fedora/linux/core/updates/3/

ae1847f087192da649ad90ff5d484e95  SRPMS/radvd-0.7.3-1_FC3.src.rpm
345449ba4cf8dfba84eae22b5d1f9911  x86_64/radvd-0.7.3-1_FC3.x86_64.rpm
90ffdb019516a0be1f1467babdfb927b  x86_64/debug/radvd-debuginfo-0.7.3-1_FC3.x86_64.rpm
096cccff8319777bb5b0f8093990f8a3  i386/radvd-0.7.3-1_FC3.i386.rpm
80263573365f5d976744c46761647bb2  i386/debug/radvd-debuginfo-0.7.3-1_FC3.i386.rpm

This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command.  
---------------------------------------------------------------------




More information about the fedora-announce-list mailing list