WLAN rt2500

David Saro david.saro at t-online.de
Sat Feb 12 20:00:29 UTC 2005 

Am Samstag, 29. Januar 2005 18:06 schrieb Felix Roeser:

Da ich es nicht mit dem Treiber vom Opensourceprojekt hin bekommen habe, hab 
ich das ganze jetzt mit ndiswrapper probiert und bin erstaunlich weit 
gekommen. Eigentlich funktioniert fast alles, doch bei der Konfiguration von 
WPA häng ich nun fest.

Das Problem ist das ich aus der Ausgabe nach "wpa_supplicant -Dndiswrapper 
-iwlan0 -c/etc/wpa_supplicant.conf -dd" nichts fehlerhaftes herauslesen kann. 
Dennoch funktioniert ein anschließendes "dhcp wlan0" nicht.

Dies ist ein Auszug aus meiner ndiswrapper.conf:

ctrl_interface=/var/run/wpa_supplicant # for wpa_cli support
network={
  ssid="Pose"
  psk="xxxxxxx"
  key_mgmt=WPA-PSK
  proto=WPA
}

Die Ausgabe nach dem ausführen von "wpa_supplicant -Dndiswrapper -iwlan0 
-c/etc/wpa_supplicant.conf -dd" sieht so aus:

Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=0
Line: 190 - start of a new network block
SSID - hexdump_ascii(len=4):
     50 4f 53 45                                       POSE            
PSK (ASCII passphrase) - hexdump_ascii(len=12):
     xx xx xx xx xx xx xx xx xx xx xx xx               xxxxxxxxxxxx    
key_mgmt: 0x2
proto: 0x1
PSK (from passphrase) - hexdump(len=32): xx xx xx xx xx xx xx xx xx xx xx xx 
xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
Priority group 0
   id=0 ssid='POSE'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 100000 usec
Already associated with a configured network - generating associated event
Association event - clear replay counter
Associated with 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
BSSID not set when trying to send an EAPOL frame
Using the source address of the last received EAPOL frame 00:00:00:00:00:00 as 
the EAPOL destination
TX EAPOL - hexdump(len=18): 00 00 00 00 00 00 00 11 09 be c7 dc 88 8e 01 01 00 
00
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=29 idleWhile=59
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=28 idleWhile=58
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=27 idleWhile=57
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=26 idleWhile=56
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=25 idleWhile=55
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=24 idleWhile=54
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=23 idleWhile=53
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=22 idleWhile=52
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=21 idleWhile=51
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=20 idleWhile=50
Authentication with 00:00:00:00:00:00 timed out.
Setting scan request: 0 sec 0 usec
Already associated with a configured network - generating associated event
Association event - clear replay counter
Associated with 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
BSSID not set when trying to send an EAPOL frame
Using the source address of the last received EAPOL frame 00:00:00:00:00:00 as 
the EAPOL destination
TX EAPOL - hexdump(len=18): 00 00 00 00 00 00 00 11 09 be c7 dc 88 8e 01 01 00 
00
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=29 idleWhile=59
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=28 idleWhile=58
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=27 idleWhile=57
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=26 idleWhile=56
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=25 idleWhile=55
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=24 idleWhile=54
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=23 idleWhile=53
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=22 idleWhile=52
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=21 idleWhile=51
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=20 idleWhile=50
Authentication with 00:00:00:00:00:00 timed out.
Setting scan request: 0 sec 0 usec
Already associated with a configured network - generating associated event
Association event - clear replay counter
Associated with 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
BSSID not set when trying to send an EAPOL frame
Using the source address of the last received EAPOL frame 00:00:00:00:00:00 as 
the EAPOL destination
TX EAPOL - hexdump(len=18): 00 00 00 00 00 00 00 11 09 be c7 dc 88 8e 01 01 00 
00
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=29 idleWhile=59
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=28 idleWhile=58
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=27 idleWhile=57
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=26 idleWhile=56
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=25 idleWhile=55
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=24 idleWhile=54
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=23 idleWhile=53
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=22 idleWhile=52
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=21 idleWhile=51
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=20 idleWhile=50
Authentication with 00:00:00:00:00:00 timed out.
Setting scan request: 0 sec 0 usec
Already associated with a configured network - generating associated event
Association event - clear replay counter
Associated with 00:00:00:00:00:00
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
BSSID not set when trying to send an EAPOL frame
Using the source address of the last received EAPOL frame 00:00:00:00:00:00 as 
the EAPOL destination
TX EAPOL - hexdump(len=18): 00 00 00 00 00 00 00 11 09 be c7 dc 88 8e 01 01 00 
00
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=29 idleWhile=59
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=28 idleWhile=58
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=27 idleWhile=57
Signal 2 received - terminating
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0

Hat jemand vielleicht eine Idee?

> Hi David,
>
> On Thu, Jan 27, 2005 at 10:46:58PM +0100, david.saro at t-online.de wrote:
> > ich muss dringend den Leuten abraten die den Treiber in dem Stadium
> > ersthaft nutzen wollen!
>
> Kann mich Deiner Empfehlung nicht anschliessen! Benutze inzwischen die
> aktuelle Beta Version und hatte auch einige Woche immer die CVS Version
> am Start. Auch bei intensiver Nutzung habe ich keine Probleme / Abstürze
> festgestellt. Aus meiner Sicht funktioniert der Treiber sehr stabil.
>
> Ich verwende ihn momentan auf einen selbst kompilierten 2.6.9 Kernel aus
> den Fedora Sourcen (inkl. Swsusp 2.15).
>
> > Als ich eth0 in wlan umänderte, war keine Veränderung. Doch als ich es
> > mit rt0 oder ra0
> > (so wie es in der readme vorgeschrieben wurde) probierte, ist der PC
> > eingefroren
>
> Kein Problem bei mir. ra0 funktioniert einwandfrei.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/fedora-de-list/attachments/20050212/351bb670/attachment.sig>

More information about the Fedora-de-list mailing list