Fedora Core 1 - Problem with apm suspend and halt (fwd)
Gerhard Wiesinger
lists at wiesinger.com
Tue Jan 13 09:01:25 UTC 2004
Noone could help me on the fedora-list.
Maybe someone can help me on dev list.
Thanx.
Ciao,
Gerhard
---------- Forwarded message ----------
Date: Sat, 10 Jan 2004 09:14:49 +0100 (CET)
From: Gerhard Wiesinger <lists at wiesinger.com>
Reply-To: fedora-list at redhat.com
To: fedora-list at redhat.com
Subject: Fedora Core 1 - Problem with apm suspend and halt
Hello!
I'm havind some problem with apm suspending and halt.
1.) apm suspend problem
The problem is that apm goes into suspend when I work on the
machine remotly with ssh. (At least it appears randomly to me
some minutes after reboot or minutes to hours later. So there is no
correlating time like 5 minutes or so after inactivity.)
But it is unusable in a server environment.
Network goes down and ssh connection is lost, no monitor signal available.
The Power Led blinks afterwards. After pressing a key system is up again.
Jan 10 08:36:32 xxx kernel: ehci_hcd 00:10.4: suspend to state 3
Jan 10 09:38:25 xxx kernel: usb-uhci.c: interrupt, status 20, frame# 0
Jan 10 09:38:25 xxx kernel: usb-uhci.c: Host controller halted, trying
to restart.
Jan 10 09:38:25 xxx kernel: usb-uhci.c: interrupt, status 20, frame# 0
Jan 10 09:38:25 xxx kernel: usb-uhci.c: Host controller halted, trying
to restart.
Jan 10 09:38:25 xxx kernel: ehci_hcd 00:10.4: resume
As you can see time is also set wrong (I found that there is a compile
time option of the kernel, but since I use local time in the BIOS it is set wrong and
confuses ntpd).
2.) halt problem
When shutting down the system with Ctrl alt del the same happens:
ca::ctrlaltdel:/sbin/shutdown -t3 -h now
-------------
Halting System
Shuttting down ide devices: hda hdd
System halted
-------------
(Harddisk is shut down but Processor is still running and it shuts not
down completly)
After pressing a key it suspends to state 3 (Power LED blinks).
ehci_hcd 00:10.4: suspend to state 3
After pressing a key again it starts again
System:
Linux xxxx 2.4.22-1.2140.nptl #1 Tue Jan 6 20:20:25 EST 2004 i686 athlon
i386 GNU/Linux
Motherboard: Epox 8KRA2+
Processor: Athlon XP Barton 2600+
ACPI is enabled in the BIOS and power saving settings are BIOS default.
Occoured with all fedora kernels, even with Redhat 9.0 on a same equipped
second machine.
Any ideas?
BTW: As far as I saw Nothbridge disconnecting is enabled by default, but
STPGNT not (both were enabled in previous kernel versions). Has something
changed here?
athcool stat
athcool version 0.3.2
enabling/disabling Athlon Powersaving mode
VIA KT400[A] (1106 3189) found
'bus Disconnect when STPGNT detected' bit is disabled.
'VLink Auto-disconnect' bit is enabled.
Thank you for the answer.
Ciao,
Gerhard
More information about the fedora-devel-list
mailing list