hdparm on FC7

Jovan Spasojevic jovansp at googlemail.com
Thu Apr 19 21:01:04 UTC 2007


Hello,

sience FC7 i am not more able to set the (E)IDE 32-bit I/O support
and multiple sector I/O sience fedora 7
on Fedora 5 and 6 there was no problem i have write the comandos in 
rc.local (/sbin/hdparm -c3 -m16 /dev/hda) (now it /dev/sda) and works.
now on fc7 don't wokrs anymore all opts are marked as "off" only runs in 
UDMA 5 Mode. i have this options set because it have a better 
input/output Support/performance on my IDE/ATA100 HDD.

Why hdparm not works anymore. I think it is the new SATA Protocoll.

The Error that appears is:

[root at localhost jovan]# /sbin/hdparm -c3 -m16 /dev/sda

/dev/sda:
  setting 32-bit IO_support flag to 3
  HDIO_SET_32BIT failed: Invalid argument
  setting multcount to 16
  HDIO_SET_MULTCOUNT failed: Inappropriate ioctl for device
  HDIO_GET_MULTCOUNT failed: Inappropriate ioctl for device
  IO_support   =  0 (default 16-bit)


/dev/sdb:
  setting 32-bit IO_support flag to 3
  HDIO_SET_32BIT failed: Invalid argument
  setting multcount to 16
  HDIO_SET_MULTCOUNT failed: Inappropriate ioctl for device
  HDIO_GET_MULTCOUNT failed: Inappropriate ioctl for device
  IO_support   =  0 (default 16-bit)
[root at localhost jovan]#


This is the current output from hdparm:

/dev/sda:
  IO_support   =  0 (default 16-bit)
  readonly     =  0 (off)
  readahead    = 256 (on)
  geometry     = 9964/255/63, sectors = 160086528, start = 0

  Model=Maxtor 6Y080L0                          , FwRev=YAR41VW0, 
SerialNo=Y3HVAW5E
  Config={ Fixed }
  RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
  BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=?16?
  CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
  IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
  PIO modes:  pio0 pio1 pio2 pio3 pio4
  DMA modes:  mdma0 mdma1 mdma2
  UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 udma3 udma4 udma5

*udma6 (How can that be when i have a UDMA5 HDD and my Motherboard 
supports max ATA100???????????????

  AdvancedPM=yes: disabled (255) WriteCache=enabled
  Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0:  ATA/ATAPI-1 
ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7

  * signifies the current active mode

But there is a error i have a Intel 775 Asrock Motherboard with ATA100 
and my Hardware support UDMA5 not UDMA6 (see above)


regards.







More information about the fedora-devel-list mailing list