[Fedora-directory-commits] ldapserver Makefile.am, 1.21, 1.22 Makefile.in, 1.24, 1.25 ltmain.sh, 1.6, 1.7 aclocal.m4, 1.14, 1.15 configure, 1.23, 1.24 missing, 1.9, 1.10 install-sh, 1.9, 1.10 depcomp, 1.9, 1.10 compile, 1.9, 1.10 config.sub, 1.8, 1.9 config.guess, 1.8, 1.9

Richard Allen Megginson (rmeggins) fedora-directory-commits at redhat.com
Thu Feb 8 18:40:14 UTC 2007 

Author: rmeggins

Update of /cvs/dirsec/ldapserver
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv26722/ldapserver

Modified Files:
	Makefile.am Makefile.in ltmain.sh aclocal.m4 configure missing 
	install-sh depcomp compile config.sub config.guess 
Log Message:
Resolves: bug 227771
Bug Description: FHS: use sysconfdir (/etc) as config file location
Reviewed by: nhosoi (Thanks!)
Fix Description: After much deliberation, we have decided that it is ok that our dynamic config files are under /etc/fedora-ds/slapd-instance.
So the config_dir will be /etc/fedora-ds/slapd-instance and the security and schema files will go there as well.  Since the FHS is ambiguous about this issue, and it will be very confusing if the configuration files are not under /etc, and there are some agents (webmin, cfengine) that do "dynamically" modify config files under /etc, this outweighs any considerations about having the server using it's config file like an "ascii database".
In addition, the presence of repl-monitor-cgi causes rpm to complain, and since we only support CGIs in the Admin Server, this file has been removed from the core fedora-ds package.
Platforms tested: RHEL4, FC6
Flag Day: no
Doc impact: no 



Index: Makefile.am
===================================================================
RCS file: /cvs/dirsec/ldapserver/Makefile.am,v
retrieving revision 1.21
retrieving revision 1.22
diff -u -r1.21 -r1.22
--- Makefile.am	7 Feb 2007 23:57:34 -0000	1.21
+++ Makefile.am	8 Feb 2007 18:40:12 -0000	1.22
@@ -166,7 +166,6 @@
 	ldap/admin/src/scripts/template-ns-activate.pl \
 	ldap/admin/src/scripts/template-ns-inactivate.pl \
 	ldap/admin/src/scripts/template-ns-newpwpolicy.pl \
-	ldap/admin/src/scripts/template-repl-monitor-cgi.pl \
 	ldap/admin/src/scripts/template-repl-monitor.pl \
 	ldap/admin/src/scripts/template-verify-db.pl \
 	$(srcdir)/ldap/admin/src/scripts/template-migrate5to7 \


Index: Makefile.in
===================================================================
RCS file: /cvs/dirsec/ldapserver/Makefile.in,v
retrieving revision 1.24
retrieving revision 1.25
diff -u -r1.24 -r1.25
--- Makefile.in	7 Feb 2007 23:57:34 -0000	1.24
+++ Makefile.in	8 Feb 2007 18:40:12 -0000	1.25
@@ -1052,7 +1052,6 @@
 	ldap/admin/src/scripts/template-ns-activate.pl \
 	ldap/admin/src/scripts/template-ns-inactivate.pl \
 	ldap/admin/src/scripts/template-ns-newpwpolicy.pl \
-	ldap/admin/src/scripts/template-repl-monitor-cgi.pl \
 	ldap/admin/src/scripts/template-repl-monitor.pl \
 	ldap/admin/src/scripts/template-verify-db.pl \
 	$(srcdir)/ldap/admin/src/scripts/template-migrate5to7 \


Index: ltmain.sh
===================================================================
RCS file: /cvs/dirsec/ldapserver/ltmain.sh,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -r1.6 -r1.7
--- ltmain.sh	7 Feb 2007 23:26:19 -0000	1.6
+++ ltmain.sh	8 Feb 2007 18:40:12 -0000	1.7
@@ -46,10 +46,16 @@
 VERSION=1.5.22
 TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
 
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
 fi
 
 # Check that we have a working $echo.
@@ -105,12 +111,14 @@
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
 # We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
+for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+         save_$lt_var=\$$lt_var
+         $lt_var=C
+         export $lt_var
+       fi"
+done
 
 # Make sure IFS has a sensible default
 lt_nl='
@@ -136,6 +144,8 @@
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
 #####################################
 # Shell function definitions:
@@ -327,7 +337,17 @@
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xdir="$my_gentop/$my_xlib"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+       *" $my_xlib_u "*)
+         extracted_serial=`expr $extracted_serial + 1`
+         my_xlib_u=lt$extracted_serial-$my_xlib ;;
+       *) break ;;
+       esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
 
       $show "${rm}r $my_xdir"
       $run ${rm}r "$my_xdir"
@@ -758,6 +778,7 @@
     *.f90) xform=f90 ;;
     *.for) xform=for ;;
     *.java) xform=java ;;
+    *.obj) xform=obj ;;
     esac
 
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -1138,8 +1159,9 @@
     for arg
     do
       case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
+      -all-static | -static | -static-libtool-libs)
+    case $arg in
+    -all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
 	  fi
@@ -1147,12 +1169,20 @@
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
-	else
+	  ;;
+    -static)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built
-	fi
+	  ;;
+    -static-libtool-libs)
+      if test -z "$pic_flag" && test -n "$link_static_flag"; then
+        dlopen_self=$dlopen_self_static
+      fi
+      prefer_static_libs=yes
+      ;;
+    esac
 	build_libtool_libs=no
 	build_old_libs=yes
 	break
@@ -1712,7 +1742,7 @@
 	continue
 	;;
 
-      -static)
+      -static | -static-libtool-libs)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
@@ -2490,7 +2520,9 @@
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+         { { test "$prefer_static_libs" = no ||
+             test "$prefer_static_libs,$installed" = "built,yes"; } ||
+           test -z "$old_library"; }; then
 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
@@ -3186,7 +3218,7 @@
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
-	  darwin|linux|osf|windows)
+	  darwin|linux|osf|windows|none)
 	    current=`expr $number_major + $number_minor`
 	    age="$number_minor"
 	    revision="$number_revision"
@@ -3410,11 +3442,11 @@
       fi
 
       # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-      done
+#      for path in $notinst_path; do
+#	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+#	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+#	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+#      done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -3515,13 +3547,12 @@
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
+      if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
 	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" -ne "0"; then
+              if test "$name" != "" && test "$name" != "0"; then
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -3560,9 +3591,7 @@
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		$LTCC $LTCFLAGS -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
@@ -3594,7 +3623,7 @@
 		  droppeddeps=yes
 		  $echo
 		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
+		  $echo "*** make it link in!  You will probably need to install it or some"
 		  $echo "*** library that it depends on before this library will be fully"
 		  $echo "*** functional.  Installing it before continuing would be even better."
 		fi
@@ -4239,12 +4268,14 @@
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
       wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+      reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -4692,16 +4723,16 @@
           case $host in
           *cygwin* | *mingw* )
             if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
             else
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
              fi
             ;;
           * )
-            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
             ;;
           esac
 	  ;;
@@ -4716,13 +4747,13 @@
 	# really was required.
 
 	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
       fi
 
       if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
@@ -4809,7 +4840,7 @@
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -4846,7 +4877,7 @@
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
       fi
 
       # Quote $echo for shipping.
@@ -5253,6 +5284,18 @@
 Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
@@ -5395,7 +5438,7 @@
 	  ;;
 	esac
 	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      \$echo \"\$0: cannot exec \$program \$*\"
       exit $EXIT_FAILURE
     fi
   else
@@ -5581,7 +5624,7 @@
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -5926,9 +5969,9 @@
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
 	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
 	  fi
 
 	  $echo "$modename: warning: relinking \`$file'" 1>&2
@@ -6137,7 +6180,7 @@
 	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
 
 	      $show "$relink_command"
 	      if $run eval "$relink_command"; then :
@@ -6413,12 +6456,15 @@
       fi
 
       # Restore saved environment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
+      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+       eval "if test \"\${save_$lt_var+set}\" = set; then
+               $lt_var=\$save_$lt_var; export $lt_var
+             else
+               $lt_unset $lt_var
+             fi"
+      done
+
 
       # Now prepare to actually exec the command.
       exec_cmd="\$cmd$args"
@@ -6775,9 +6821,9 @@
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
+                    try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
+                    try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
@@ -6791,9 +6837,11 @@
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
+                    specify library version info [each variable defaults to 0]
 
 All other options (arguments beginning with \`-') are ignored.

More information about the Fedora-directory-commits mailing list