[Fedora-directory-commits] ldapserver Makefile.am, 1.27, 1.28 Makefile.in, 1.31, 1.32 ltmain.sh, 1.10, 1.11
Nathan Kinder (nkinder)
fedora-directory-commits at redhat.com
Wed Feb 21 17:44:16 UTC 2007
- Previous message (by thread): [Fedora-directory-commits] ldapserver Makefile.am, 1.26, 1.27 configure.ac, 1.20, 1.21 config.h.in, 1.3, 1.4 aclocal.m4, 1.20, 1.21 configure, 1.29, 1.30 missing, 1.15, 1.16 install-sh, 1.15, 1.16 compile, 1.15, 1.16 depcomp, 1.15, 1.16 config.sub, 1.14, 1.15 config.guess, 1.14, 1.15 Makefile.in, 1.30, 1.31
- Next message (by thread): [Fedora-directory-commits] ldapserver/ldap/admin/src ds_newinst.pl, 1.12, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: nkinder
Update of /cvs/dirsec/ldapserver
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv8430
Modified Files:
Makefile.am Makefile.in ltmain.sh
Log Message:
Resolves: 229428
Summary: ns-slapd needs to be linked with the C++ compiler on HP-UX.
Index: Makefile.am
===================================================================
RCS file: /cvs/dirsec/ldapserver/Makefile.am,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -r1.27 -r1.28
--- Makefile.am 19 Feb 2007 23:55:04 -0000 1.27
+++ Makefile.am 21 Feb 2007 17:44:13 -0000 1.28
@@ -910,6 +910,11 @@
@nspr_inc@ @svrcore_inc@
ns_slapd_LDADD = libslapd.la libldaputil.a $(LDAPSDK_LINK) $(NSS_LINK) \
$(NSPR_LINK) $(SASL_LINK) $(SVRCORE_LINK) $(LIBNSL) $(LIBSOCKET)
+# We need to link ns-slapd with the C++ compiler on HP-UX since we load
+# some C++ shared libraries (such as icu).
+if HPUX
+ns_slapd_LINK = $(CXXLINK)
+endif
#------------------------
# pwdhash
Index: Makefile.in
===================================================================
RCS file: /cvs/dirsec/ldapserver/Makefile.in,v
retrieving revision 1.31
retrieving revision 1.32
diff -u -r1.31 -r1.32
--- Makefile.in 19 Feb 2007 23:55:04 -0000 1.31
+++ Makefile.in 21 Feb 2007 17:44:13 -0000 1.32
@@ -1778,6 +1778,9 @@
ns_slapd_LDADD = libslapd.la libldaputil.a $(LDAPSDK_LINK) $(NSS_LINK) \
$(NSPR_LINK) $(SASL_LINK) $(SVRCORE_LINK) $(LIBNSL) $(LIBSOCKET)
+# We need to link ns-slapd with the C++ compiler on HP-UX since we load
+# some C++ shared libraries (such as icu).
+ at HPUX_TRUE@ns_slapd_LINK = $(CXXLINK)
#------------------------
# pwdhash
@@ -3615,7 +3618,7 @@
ldap/servers/slapd/$(DEPDIR)/$(am__dirstamp)
ns-slapd$(EXEEXT): $(ns_slapd_OBJECTS) $(ns_slapd_DEPENDENCIES)
@rm -f ns-slapd$(EXEEXT)
- $(LINK) $(ns_slapd_LDFLAGS) $(ns_slapd_OBJECTS) $(ns_slapd_LDADD) $(LIBS)
+ $(ns_slapd_LINK) $(ns_slapd_LDFLAGS) $(ns_slapd_OBJECTS) $(ns_slapd_LDADD) $(LIBS)
ldap/servers/slapd/tools/pwdhash_bin-pwenc.$(OBJEXT): \
ldap/servers/slapd/tools/$(am__dirstamp) \
ldap/servers/slapd/tools/$(DEPDIR)/$(am__dirstamp)
Index: ltmain.sh
===================================================================
RCS file: /cvs/dirsec/ldapserver/ltmain.sh,v
retrieving revision 1.10
retrieving revision 1.11
diff -u -r1.10 -r1.11
--- ltmain.sh 16 Feb 2007 23:25:06 -0000 1.10
+++ ltmain.sh 21 Feb 2007 17:44:13 -0000 1.11
@@ -46,10 +46,16 @@
VERSION=1.5.22
TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
# Check that we have a working $echo.
@@ -105,12 +111,14 @@
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
+for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ fi"
+done
# Make sure IFS has a sensible default
lt_nl='
@@ -136,6 +144,8 @@
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
#####################################
# Shell function definitions:
@@ -327,7 +337,17 @@
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xdir="$my_gentop/$my_xlib"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ extracted_serial=`expr $extracted_serial + 1`
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
$show "${rm}r $my_xdir"
$run ${rm}r "$my_xdir"
@@ -758,6 +778,7 @@
*.f90) xform=f90 ;;
*.for) xform=for ;;
*.java) xform=java ;;
+ *.obj) xform=obj ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -1138,8 +1159,9 @@
for arg
do
case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
fi
@@ -1147,12 +1169,20 @@
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
- else
+ ;;
+ -static)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=built
- fi
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
build_libtool_libs=no
build_old_libs=yes
break
@@ -1712,7 +1742,7 @@
continue
;;
- -static)
+ -static | -static-libtool-libs)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
@@ -2490,7 +2520,9 @@
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
# We need to hardcode the library path
if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
@@ -3186,7 +3218,7 @@
# which has an extra 1 added just for fun
#
case $version_type in
- darwin|linux|osf|windows)
+ darwin|linux|osf|windows|none)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_revision"
@@ -3410,11 +3442,11 @@
fi
# Eliminate all temporary directories.
- for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
- done
+# for path in $notinst_path; do
+# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+# done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -3515,13 +3547,12 @@
int main() { return 0; }
EOF
$rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
- if test "$?" -eq 0 ; then
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" -ne "0"; then
+ if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
@@ -3560,9 +3591,7 @@
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $i
- # Did it work?
- if test "$?" -eq 0 ; then
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
@@ -3594,7 +3623,7 @@
droppeddeps=yes
$echo
$echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
+ $echo "*** make it link in! You will probably need to install it or some"
$echo "*** library that it depends on before this library will be fully"
$echo "*** functional. Installing it before continuing would be even better."
fi
@@ -4239,12 +4268,14 @@
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
generated="$generated $gentop"
@@ -4692,16 +4723,16 @@
case $host in
*cygwin* | *mingw* )
if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
else
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
fi
;;
* )
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
;;
esac
;;
@@ -4716,13 +4747,13 @@
# really was required.
# Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
fi
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
@@ -4809,7 +4840,7 @@
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
else
# fast_install is set to needless
relink_command=
@@ -4846,7 +4877,7 @@
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
fi
# Quote $echo for shipping.
@@ -5253,6 +5284,18 @@
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
@@ -5395,7 +5438,7 @@
;;
esac
$echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+ \$echo \"\$0: cannot exec \$program \$*\"
exit $EXIT_FAILURE
fi
else
@@ -5581,7 +5624,7 @@
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
@@ -5926,9 +5969,9 @@
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
else
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
@@ -6137,7 +6180,7 @@
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
$show "$relink_command"
if $run eval "$relink_command"; then :
@@ -6413,12 +6456,15 @@
fi
# Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
+ for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
@@ -6775,9 +6821,9 @@
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
+ try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
- try to export only the symbols matching REGEX
+ try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
@@ -6791,9 +6837,11 @@
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
+ specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
- Previous message (by thread): [Fedora-directory-commits] ldapserver Makefile.am, 1.26, 1.27 configure.ac, 1.20, 1.21 config.h.in, 1.3, 1.4 aclocal.m4, 1.20, 1.21 configure, 1.29, 1.30 missing, 1.15, 1.16 install-sh, 1.15, 1.16 compile, 1.15, 1.16 depcomp, 1.15, 1.16 config.sub, 1.14, 1.15 config.guess, 1.14, 1.15 Makefile.in, 1.30, 1.31
- Next message (by thread): [Fedora-directory-commits] ldapserver/ldap/admin/src ds_newinst.pl, 1.12, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the Fedora-directory-commits
mailing list