[Fedora-directory-users] FC3 - Back to cyrus-sasl
Jason Kullo Sam
kullo at lws.bia.edu
Thu Sep 29 16:31:13 UTC 2005
Holy cats...it worked! Cyrus is goin now...
And, db4-devel is the same name in FC3...yum is even nice enough to have it!
Nathan Kinder wrote:
> In addition to what Rob mentioned below, your build is not finding the
> gssapi header files. I checked on my FC3 machine, and the gssapi
> include location is /usr/include/gssapi. You should change your
> configure line to have "--enable-gssapi=/usr/include/gssapi".
>
> -NGK
>
> Rob Crittenden wrote:
>
>> This info was great, thanks.
>>
>> My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3
>> and I noticed a few differences.
>>
>> One is when configure is checking for database support (db, ndbm,
>> etc). It is found for me, not for you.
>>
>> Can you try installing db4-devel-4.1.25-8.1 (or whatever the
>> equivalent is on FC3)?
>>
>> Another difference I saw is in pam_start in -lpam. I don't know if
>> this is anything to worry about or not.
>>
>> rob
>>
>> Jason Kullo Sam wrote:
>>
>>> Noriko Hosoi wrote:
>>>
>>>> My cyrus sasl build creates a symbolic link to the lib directory
>>>> like this. Do you see it in your build log?
>>>>
>>>>> [...]
>>>>> adding static plugins and dependencies
>>>>> ar cru .libs/libsasl2.a ../plugins/sasldb.o
>>>>> ../sasldb/db_berkeley.o ../sasldb/allockey.o ../plugins/cram.o
>>>>> ../plugins/digestmd5.o ../plugins/gssapi.o ../plugins/plain.o
>>>>> ../plugins/anonymous.o
>>>>> rm -f libsasl2.a
>>>>> *ln -s .libs/libsasl2.a libsasl2.a*
>>>>> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib'
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --noriko
>>>>
>>>> Richard Megginson wrote:
>>>>
>>>>> There is still no libsasl2.a. I'm not sure what the problem is.
>>>>> Try using "make" instead of "gmake" - perhaps gmake is slightly
>>>>> different on your OS/version?
>>>>>
>>> ===========================
>>> Answering both of these...
>>> I cleaned and blew up the directory again, and started over. Even
>>> fixed a typo in the configure portion(apparently this typo allowed
>>> it to finish before). The configureation was done, but the make
>>> failed. It doesn't look like it ever even MAKES the libsasl2.a,
>>> nevermind links it...
>>>
>>> Here's the whole shabang in case my noobness is leaving something
>>> important out...
>>> =================================================================
>>> [root at genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
>>> tar: Read 2048 bytes from -
>>> [root at genie ds]# cd cyrus-sasl-2.1.20
>>> [root at genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure
>>> --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des
>>> --without-openssl
>>> configure: creating cache ./config.cache
>>> checking build system type... i686-pc-linux-gnu
>>> checking host system type... i686-pc-linux-gnu
>>> checking target system type... i686-pc-linux-gnu
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking whether build environment is sane... yes
>>> checking for gawk... gawk
>>> checking whether make sets $(MAKE)... yes
>>> checking for gcc... gcc
>>> checking for C compiler default output... a.out
>>> checking whether the C compiler works... yes
>>> checking whether we are cross compiling... no
>>> checking for suffix of executables...
>>> checking for suffix of object files... o
>>> checking whether we are using the GNU C compiler... yes
>>> checking whether gcc accepts -g... yes
>>> checking for gcc option to accept ANSI C... none needed
>>> checking for style of include used by make... GNU
>>> checking dependency style of gcc... gcc3
>>> checking how to run the C preprocessor... gcc -E
>>> checking for gawk... (cached) gawk
>>> checking whether ln -s works... yes
>>> checking whether make sets $(MAKE)... (cached) yes
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking for __attribute__... yes
>>> checking for runpath switch... -Wl,-rpath,
>>> checking for ranlib... ranlib
>>> checking for ld used by GCC... /usr/bin/ld
>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>> checking for BSD-compatible nm... /usr/bin/nm -B
>>> updating cache ./config.cache
>>> loading cache ./config.cache within ltconfig
>>> checking for object suffix... o
>>> checking for executable suffix... (cached)
>>> checking for gcc option to produce PIC... -fPIC
>>> checking if gcc PIC flag -fPIC works... yes
>>> checking if gcc supports -c -o file.o... yes
>>> checking if gcc supports -c -o file.lo... yes
>>> checking if gcc supports -fno-rtti -fno-exceptions ... no
>>> checking if gcc static flag -static works... -static
>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>> checking whether the linker (/usr/bin/ld) supports shared
>>> libraries... yes
>>> checking command to parse /usr/bin/nm -B output... ok
>>> checking how to hardcode library paths into programs... immediate
>>> checking for /usr/bin/ld option to reload object files... -r
>>> checking dynamic linker characteristics... Linux ld.so
>>> checking if libtool supports shared libraries... yes
>>> checking whether to build shared libraries... yes
>>> checking whether to build static libraries... yes
>>> checking for objdir... .libs
>>> creating libtool
>>> updating cache ./config.cache
>>> configure: loading cache ./config.cache
>>> checking for connect... yes
>>> checking for res_search... no
>>> checking for res_search in -lresolv... yes
>>> checking for dn_expand... yes
>>> checking for dns_lookup... no
>>> checking DB path to use... /etc/sasldb2
>>> checking for egrep... grep -E
>>> checking for ANSI C header files... yes
>>> checking for sys/types.h... yes
>>> checking for sys/stat.h... yes
>>> checking for stdlib.h... yes
>>> checking for string.h... yes
>>> checking for memory.h... yes
>>> checking for strings.h... yes
>>> checking for inttypes.h... yes
>>> checking for stdint.h... yes
>>> checking for unistd.h... yes
>>> checking db.h usability... no
>>> checking db.h presence... no
>>> checking for db.h... no
>>> checking ndbm.h usability... no
>>> checking ndbm.h presence... no
>>> checking for ndbm.h... no
>>> checking gdbm.h usability... no
>>> checking gdbm.h presence... no
>>> checking for gdbm.h... no
>>> checking DB library to use... no
>>> configure: WARNING: Disabling SASL authentication database support
>>> checking for dlopen in -ldl... yes
>>> checking /dev/random to use... /dev/random
>>> checking for nm... /usr/bin/nm -B
>>> checking for underscore before symbols... no
>>> checking for syslog... yes
>>> checking for pam_start in -lpam... no
>>> checking if I should include saslauthd... /var/state/saslauthd
>>> checking to include Courier authdaemond support... /dev/null
>>> checking if I should include pwcheck... no
>>> checking if I should include the alwaystrue verifier... no
>>> checking if we should enable sasl_checkapop... enabled
>>> checking CRAM-MD5... enabled
>>> checking for OpenSSL... no
>>> configure: WARNING: No DES support for DIGEST-MD5
>>> checking DIGEST-MD5... enabled
>>> configure: WARNING: OpenSSL not found -- OTP will be disabled
>>> checking OTP... disabled
>>> configure: WARNING: OpenSSL not found -- SRP will be disabled
>>> checking SRP... disabled
>>> checking KERBEROS_V4... disabled
>>> checking for crypt... no
>>> checking for crypt in -lcrypt... yes
>>> checking gssapi.h usability... no
>>> checking gssapi.h presence... no
>>> checking for gssapi.h... no
>>> checking gssapi/gssapi.h usability... no
>>> checking gssapi/gssapi.h presence... no
>>> checking for gssapi/gssapi.h... no
>>> configure: WARNING: Disabling GSSAPI - no include files found
>>> checking GSSAPI... disabled
>>> checking PLAIN... enabled
>>> checking ANONYMOUS... enabled
>>> checking LOGIN... disabled
>>> configure: WARNING: OpenSSL not found -- NTLM will be disabled
>>> checking NTLM... disabled
>>> checking SQL... disabled
>>> checking for dmalloc library... no
>>> checking for sfio library... no
>>> checking for getsubopt... yes
>>> checking for snprintf... yes
>>> checking for vsnprintf... yes
>>> checking for inet_aton in -lresolv... yes
>>> checking for getaddrinfo... yes
>>> checking for gai_strerror... yes
>>> checking for getnameinfo... yes
>>> checking for an ANSI C-conforming const... yes
>>> checking for inline... inline
>>> checking for mode_t... yes
>>> checking for pid_t... yes
>>> checking return type of signal handlers... void
>>> checking whether time.h and sys/time.h may both be included... yes
>>> checking for ANSI C header files... (cached) yes
>>> checking for dirent.h that defines DIR... yes
>>> checking for library containing opendir... none required
>>> checking for sys/wait.h that is POSIX.1 compatible... yes
>>> checking dlfcn.h usability... yes
>>> checking dlfcn.h presence... yes
>>> checking for dlfcn.h... yes
>>> checking fcntl.h usability... yes
>>> checking fcntl.h presence... yes
>>> checking for fcntl.h... yes
>>> checking limits.h usability... yes
>>> checking limits.h presence... yes
>>> checking for limits.h... yes
>>> checking malloc.h usability... yes
>>> checking malloc.h presence... yes
>>> checking for malloc.h... yes
>>> checking paths.h usability... yes
>>> checking paths.h presence... yes
>>> checking for paths.h... yes
>>> checking for strings.h... (cached) yes
>>> checking sys/file.h usability... yes
>>> checking sys/file.h presence... yes
>>> checking for sys/file.h... yes
>>> checking sys/time.h usability... yes
>>> checking sys/time.h presence... yes
>>> checking for sys/time.h... yes
>>> checking syslog.h usability... yes
>>> checking syslog.h presence... yes
>>> checking for syslog.h... yes
>>> checking for unistd.h... (cached) yes
>>> checking for inttypes.h... (cached) yes
>>> checking sys/uio.h usability... yes
>>> checking sys/uio.h presence... yes
>>> checking for sys/uio.h... yes
>>> checking sys/param.h usability... yes
>>> checking sys/param.h presence... yes
>>> checking for sys/param.h... yes
>>> checking sysexits.h usability... yes
>>> checking sysexits.h presence... yes
>>> checking for sysexits.h... yes
>>> checking stdarg.h usability... yes
>>> checking stdarg.h presence... yes
>>> checking for stdarg.h... yes
>>> checking varargs.h usability... no
>>> checking varargs.h presence... no
>>> checking for varargs.h... no
>>> checking whether you have ss_family in struct sockaddr_storage... yes
>>> checking whether you have sa_len in struct sockaddr... no
>>> checking for socklen_t... yes
>>> checking for gethostname... yes
>>> checking for getdomainname... yes
>>> checking for getpwnam... yes
>>> checking for getspnam... yes
>>> checking for gettimeofday... yes
>>> checking for inet_aton... yes
>>> checking for memcpy... yes
>>> checking for mkdir... yes
>>> checking for select... yes
>>> checking for socket... yes
>>> checking for strchr... yes
>>> checking for strdup... yes
>>> checking for strerror... yes
>>> checking for strspn... yes
>>> checking for strstr... yes
>>> checking for strtol... yes
>>> checking for jrand48... yes
>>> updating cache ./config.cache
>>> configure: creating ./config.status
>>> config.status: creating Makefile
>>> config.status: creating include/Makefile
>>> config.status: creating sasldb/Makefile
>>> config.status: creating plugins/Makefile
>>> config.status: creating lib/Makefile
>>> config.status: creating utils/Makefile
>>> config.status: creating doc/Makefile
>>> config.status: creating sample/Makefile
>>> config.status: creating java/Makefile
>>> config.status: creating java/CyrusSasl/Makefile
>>> config.status: creating java/Test/Makefile
>>> config.status: creating java/javax/Makefile
>>> config.status: creating java/javax/security/Makefile
>>> config.status: creating java/javax/security/auth/Makefile
>>> config.status: creating java/javax/security/auth/callback/Makefile
>>> config.status: creating pwcheck/Makefile
>>> config.status: creating man/Makefile
>>> config.status: creating config.h
>>> config.status: executing depfiles commands
>>> configure: configuring in saslauthd
>>> configure: running /bin/sh './configure' --prefix=/usr/local
>>> '--enable-gssapi=/usr/kerberos/include/' '--enable-static'
>>> '--without-des' '--without-openssl' 'CFLAGS=-O2'
>>> --cache-file=.././config.cache --srcdir=.
>>> configure: loading cache .././config.cache
>>> checking build system type... (cached) i686-pc-linux-gnu
>>> checking host system type... (cached) i686-pc-linux-gnu
>>> checking for a BSD-compatible install... (cached) /usr/bin/install -c
>>> checking whether build environment is sane... yes
>>> checking for gawk... (cached) gawk
>>> checking whether make sets $(MAKE)... (cached) yes
>>> checking for gcc... (cached) gcc
>>> checking for C compiler default output... a.out
>>> checking whether the C compiler works... yes
>>> checking whether we are cross compiling... no
>>> checking for suffix of executables...
>>> checking for suffix of object files... (cached) o
>>> checking whether we are using the GNU C compiler... (cached) yes
>>> checking whether gcc accepts -g... (cached) yes
>>> checking for gcc option to accept ANSI C... (cached) none needed
>>> checking for style of include used by make... GNU
>>> checking dependency style of gcc... (cached) gcc3
>>> checking how to run the C preprocessor... (cached) gcc -E
>>> checking for gawk... (cached) gawk
>>> checking whether make sets $(MAKE)... (cached) yes
>>> checking whether ln -s works... yes
>>> checking for a BSD-compatible install... /usr/bin/install -c
>>> checking for __attribute__... (cached) yes
>>> checking for runpath switch... -Wl,-rpath,
>>> checking for connect... (cached) yes
>>> checking for res_search... (cached) no
>>> checking for res_search in -lresolv... (cached) yes
>>> checking for dn_expand... (cached) yes
>>> checking for dns_lookup... (cached) no
>>> checking for egrep... (cached) grep -E
>>> checking for ANSI C header files... (cached) yes
>>> checking for sys/types.h... (cached) yes
>>> checking for sys/stat.h... (cached) yes
>>> checking for stdlib.h... (cached) yes
>>> checking for string.h... (cached) yes
>>> checking for memory.h... (cached) yes
>>> checking for strings.h... (cached) yes
>>> checking for inttypes.h... (cached) yes
>>> checking for stdint.h... (cached) yes
>>> checking for unistd.h... (cached) yes
>>> checking for OpenSSL... no
>>> checking KERBEROS_V4... disabled
>>> checking for crypt... (cached) no
>>> checking for crypt in -lcrypt... (cached) yes
>>> checking for gssapi.h... (cached) no
>>> checking for gssapi/gssapi.h... (cached) no
>>> configure: WARNING: Disabling GSSAPI - no include files found
>>> checking GSSAPI... disabled
>>> checking for crypt... (cached) no
>>> checking for crypt in -lcrypt... (cached) yes
>>> checking for pam_start in -lpam... (cached) no
>>> checking for PAM support... no
>>> checking for inet_aton in -lresolv... (cached) yes
>>> checking to include LDAP support... no
>>> checking for ANSI C header files... (cached) yes
>>> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
>>> checking whether time.h and sys/time.h may both be included...
>>> (cached) yes
>>> checking crypt.h usability... yes
>>> checking crypt.h presence... yes
>>> checking for crypt.h... yes
>>> checking for fcntl.h... (cached) yes
>>> checking krb5.h usability... no
>>> checking krb5.h presence... no
>>> checking for krb5.h... no
>>> checking for strings.h... (cached) yes
>>> checking for syslog.h... (cached) yes
>>> checking for unistd.h... (cached) yes
>>> checking for sys/time.h... (cached) yes
>>> checking for sys/uio.h... (cached) yes
>>> checking for an ANSI C-conforming const... (cached) yes
>>> checking for pid_t... (cached) yes
>>> checking whether gcc implements __func__... yes
>>> checking return type of signal handlers... (cached) void
>>> checking for gethostname... (cached) yes
>>> checking for mkdir... (cached) yes
>>> checking for socket... (cached) yes
>>> checking for strdup... (cached) yes
>>> checking for getspnam... (cached) yes
>>> checking for strlcat... no
>>> checking for strlcpy... no
>>> checking for getaddrinfo... (cached) yes
>>> checking for getnameinfo... (cached) yes
>>> checking whether you have ss_family in struct sockaddr_storage...
>>> (cached) yes
>>> checking whether you have sa_len in struct sockaddr... (cached) no
>>> checking for socklen_t... (cached) yes
>>> updating cache .././config.cache
>>> configure: creating ./config.status
>>> config.status: creating Makefile
>>> config.status: creating saslauthd.h
>>> config.status: executing depfiles commands
>>> Configuration Complete. Type 'make' to build.
>>> [root at genie cyrus-sasl-2.1.20]# make
>>> make all-recursive
>>> make[1]: Entering directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>>> Making all in include
>>> make[2]: Entering directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
>>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -W -O2 -MT makemd5.o
>>> -MD -MP -MF ".deps/makemd5.Tpo" \
>>> -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
>>> then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
>>> else rm -f ".deps/makemd5.Tpo"; exit 1; \
>>> fi
>>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o makemd5
>>> makemd5.o -lresolv
>>> mkdir .libs
>>> gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv
>>> rm -f md5global.h
>>> ./makemd5 md5global.h
>>> make[2]: Leaving directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
>>> Making all in sasldb
>>> make[2]: Entering directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../include -Wall -W -O2 -MT allockey.lo -MD
>>> -MP -MF ".deps/allockey.Tpo" \
>>> -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c; \
>>> then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \
>>> else rm -f ".deps/allockey.Tpo"; exit 1; \
>>> fi
>>> mkdir .libs
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W
>>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c
>>> -fPIC -DPIC -o .libs/allockey.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W
>>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o
>>> allockey.o >/dev/null 2>&1
>>> mv -f .libs/allockey.lo allockey.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../include -Wall -W -O2 -MT db_none.lo -MD
>>> -MP -MF ".deps/db_none.Tpo" \
>>> -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \
>>> then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \
>>> else rm -f ".deps/db_none.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/db_none.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W
>>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -fPIC
>>> -DPIC -o .libs/db_none.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W
>>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o
>>> db_none.o >/dev/null 2>&1
>>> mv -f .libs/db_none.lo db_none.lo
>>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasldb.la
>>> allockey.lo db_none.lo -lresolv
>>> rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.*
>>> ar cru .libs/libsasldb.al allockey.lo db_none.lo
>>> ranlib .libs/libsasldb.al
>>> creating libsasldb.la
>>> (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la libsasldb.la)
>>> ar cru .libs/libsasldb.a db_none.o
>>> make[2]: Leaving directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
>>> Making all in plugins
>>> make[2]: Entering directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT cram.lo -MD -MP -MF ".deps/cram.Tpo" \
>>> -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \
>>> then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \
>>> else rm -f ".deps/cram.Tpo"; exit 1; \
>>> fi
>>> mkdir .libs
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c
>>> cram.c -fPIC -DPIC -o .libs/cram.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c
>>> cram.c -o cram.o >/dev/null 2>&1
>>> mv -f .libs/cram.lo cram.lo
>>> /bin/sh ./makeinit.sh
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \
>>> -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo
>>> './'`crammd5_init.c; \
>>> then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \
>>> else rm -f ".deps/crammd5_init.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/crammd5_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF
>>> .deps/crammd5_init.Tpo -c crammd5_init.c -fPIC -DPIC -o
>>> .libs/crammd5_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF
>>> .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o
>>> >/dev/null 2>&1
>>> mv -f .libs/crammd5_init.lo crammd5_init.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
>>> -c -o plugin_common.lo `test -f 'plugin_common.c' || echo
>>> './'`plugin_common.c; \
>>> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
>>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/plugin_common.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF
>>> .deps/plugin_common.Tpo -c plugin_common.c -fPIC -DPIC -o
>>> .libs/plugin_common.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF
>>> .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o
>>> >/dev/null 2>&1
>>> mv -f .libs/plugin_common.lo plugin_common.lo
>>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module
>>> -export-dynamic -rpath /usr/lib/sasl2 -o libcrammd5.la
>>> -version-info 2:20:0 cram.lo crammd5_init.lo plugin_common.lo -lresolv
>>> rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.*
>>> gcc -shared cram.lo crammd5_init.lo plugin_common.lo -lresolv -lc
>>> -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20
>>> (cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20
>>> libcrammd5.so.2)
>>> (cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20
>>> libcrammd5.so)
>>> ar cru .libs/libcrammd5.a cram.o crammd5_init.o plugin_common.o
>>> ranlib .libs/libcrammd5.a
>>> creating libcrammd5.la
>>> (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la
>>> libcrammd5.la)
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \
>>> -c -o digestmd5.lo `test -f 'digestmd5.c' || echo './'`digestmd5.c; \
>>> then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \
>>> else rm -f ".deps/digestmd5.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/digestmd5.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF
>>> .deps/digestmd5.Tpo -c digestmd5.c -fPIC -DPIC -o .libs/digestmd5.lo
>>> digestmd5.c: In function `digestmd5_server_mech_step2':
>>> digestmd5.c:2093: warning: dereferencing type-punned pointer will
>>> break strict-aliasing rules
>>> digestmd5.c:2110: warning: dereferencing type-punned pointer will
>>> break strict-aliasing rules
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF
>>> .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1
>>> mv -f .libs/digestmd5.lo digestmd5.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \
>>> -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo
>>> './'`digestmd5_init.c; \
>>> then mv ".deps/digestmd5_init.Tpo" ".deps/digestmd5_init.Plo"; \
>>> else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/digestmd5_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF
>>> .deps/digestmd5_init.Tpo -c digestmd5_init.c -fPIC -DPIC -o
>>> .libs/digestmd5_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF
>>> .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o
>>> >/dev/null 2>&1
>>> mv -f .libs/digestmd5_init.lo digestmd5_init.lo
>>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module
>>> -export-dynamic -rpath /usr/lib/sasl2 -o libdigestmd5.la
>>> -version-info 2:20:0 digestmd5.lo digestmd5_init.lo
>>> plugin_common.lo -lresolv -lresolv
>>> rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.*
>>> gcc -shared digestmd5.lo digestmd5_init.lo plugin_common.lo
>>> -lresolv -lresolv -lc -Wl,-soname -Wl,libdigestmd5.so.2 -o
>>> .libs/libdigestmd5.so.2.0.20
>>> (cd .libs && rm -f libdigestmd5.so.2 && ln -s libdigestmd5.so.2.0.20
>>> libdigestmd5.so.2)
>>> (cd .libs && rm -f libdigestmd5.so && ln -s libdigestmd5.so.2.0.20
>>> libdigestmd5.so)
>>> ar cru .libs/libdigestmd5.a digestmd5.o digestmd5_init.o
>>> plugin_common.o
>>> ranlib .libs/libdigestmd5.a
>>> creating libdigestmd5.la
>>> (cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la
>>> libdigestmd5.la)
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT plain.lo -MD -MP -MF ".deps/plain.Tpo" \
>>> -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \
>>> then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \
>>> else rm -f ".deps/plain.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/plain.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo
>>> -c plain.c -fPIC -DPIC -o .libs/plain.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo
>>> -c plain.c -o plain.o >/dev/null 2>&1
>>> mv -f .libs/plain.lo plain.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \
>>> -c -o plain_init.lo `test -f 'plain_init.c' || echo
>>> './'`plain_init.c; \
>>> then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \
>>> else rm -f ".deps/plain_init.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/plain_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF
>>> .deps/plain_init.Tpo -c plain_init.c -fPIC -DPIC -o
>>> .libs/plain_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF
>>> .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null 2>&1
>>> mv -f .libs/plain_init.lo plain_init.lo
>>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module
>>> -export-dynamic -rpath /usr/lib/sasl2 -o libplain.la -version-info
>>> 2:20:0 plain.lo plain_init.lo plugin_common.lo -lcrypt -lresolv
>>> rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.*
>>> gcc -shared plain.lo plain_init.lo plugin_common.lo -lcrypt
>>> -lresolv -lc -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20
>>> (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20
>>> libplain.so.2)
>>> (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20 libplain.so)
>>> ar cru .libs/libplain.a plain.o plain_init.o plugin_common.o
>>> ranlib .libs/libplain.a
>>> creating libplain.la
>>> (cd .libs && rm -f libplain.la && ln -s ../libplain.la libplain.la)
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \
>>> -c -o anonymous.lo `test -f 'anonymous.c' || echo './'`anonymous.c; \
>>> then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \
>>> else rm -f ".deps/anonymous.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/anonymous.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF
>>> .deps/anonymous.Tpo -c anonymous.c -fPIC -DPIC -o .libs/anonymous.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF
>>> .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1
>>> mv -f .libs/anonymous.lo anonymous.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../lib -I../sasldb -I../include -Wall -W -O2
>>> -MT anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \
>>> -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo
>>> './'`anonymous_init.c; \
>>> then mv ".deps/anonymous_init.Tpo" ".deps/anonymous_init.Plo"; \
>>> else rm -f ".deps/anonymous_init.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/anonymous_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF
>>> .deps/anonymous_init.Tpo -c anonymous_init.c -fPIC -DPIC -o
>>> .libs/anonymous_init.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb
>>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF
>>> .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o
>>> >/dev/null 2>&1
>>> mv -f .libs/anonymous_init.lo anonymous_init.lo
>>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -module
>>> -export-dynamic -rpath /usr/lib/sasl2 -o libanonymous.la
>>> -version-info 2:20:0 anonymous.lo anonymous_init.lo
>>> plugin_common.lo -lresolv
>>> rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.*
>>> gcc -shared anonymous.lo anonymous_init.lo plugin_common.lo
>>> -lresolv -lc -Wl,-soname -Wl,libanonymous.so.2 -o
>>> .libs/libanonymous.so.2.0.20
>>> (cd .libs && rm -f libanonymous.so.2 && ln -s libanonymous.so.2.0.20
>>> libanonymous.so.2)
>>> (cd .libs && rm -f libanonymous.so && ln -s libanonymous.so.2.0.20
>>> libanonymous.so)
>>> ar cru .libs/libanonymous.a anonymous.o anonymous_init.o
>>> plugin_common.o
>>> ranlib .libs/libanonymous.a
>>> creating libanonymous.la
>>> (cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la
>>> libanonymous.la)
>>> make[2]: Leaving directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
>>> Making all in lib
>>> make[2]: Entering directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> auxprop.lo -MD -MP -MF ".deps/auxprop.Tpo" \
>>> -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \
>>> then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \
>>> else rm -f ".deps/auxprop.Tpo"; exit 1; \
>>> fi
>>> mkdir .libs
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF
>>> .deps/auxprop.Tpo -c auxprop.c -fPIC -DPIC -o .libs/auxprop.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF
>>> .deps/auxprop.Tpo -c auxprop.c -o auxprop.o >/dev/null 2>&1
>>> mv -f .libs/auxprop.lo auxprop.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> canonusr.lo -MD -MP -MF ".deps/canonusr.Tpo" \
>>> -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c; \
>>> then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \
>>> else rm -f ".deps/canonusr.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/canonusr.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF
>>> .deps/canonusr.Tpo -c canonusr.c -fPIC -DPIC -o .libs/canonusr.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF
>>> .deps/canonusr.Tpo -c canonusr.c -o canonusr.o >/dev/null 2>&1
>>> mv -f .libs/canonusr.lo canonusr.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> checkpw.lo -MD -MP -MF ".deps/checkpw.Tpo" \
>>> -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \
>>> then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \
>>> else rm -f ".deps/checkpw.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/checkpw.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF
>>> .deps/checkpw.Tpo -c checkpw.c -fPIC -DPIC -o .libs/checkpw.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF
>>> .deps/checkpw.Tpo -c checkpw.c -o checkpw.o >/dev/null 2>&1
>>> mv -f .libs/checkpw.lo checkpw.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> client.lo -MD -MP -MF ".deps/client.Tpo" \
>>> -c -o client.lo `test -f 'client.c' || echo './'`client.c; \
>>> then mv ".deps/client.Tpo" ".deps/client.Plo"; \
>>> else rm -f ".deps/client.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/client.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo
>>> -c client.c -fPIC -DPIC -o .libs/client.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo
>>> -c client.c -o client.o >/dev/null 2>&1
>>> mv -f .libs/client.lo client.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> common.lo -MD -MP -MF ".deps/common.Tpo" \
>>> -c -o common.lo `test -f 'common.c' || echo './'`common.c; \
>>> then mv ".deps/common.Tpo" ".deps/common.Plo"; \
>>> else rm -f ".deps/common.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/common.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo
>>> -c common.c -fPIC -DPIC -o .libs/common.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo
>>> -c common.c -o common.o >/dev/null 2>&1
>>> mv -f .libs/common.lo common.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> config.lo -MD -MP -MF ".deps/config.Tpo" \
>>> -c -o config.lo `test -f 'config.c' || echo './'`config.c; \
>>> then mv ".deps/config.Tpo" ".deps/config.Plo"; \
>>> else rm -f ".deps/config.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/config.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo
>>> -c config.c -fPIC -DPIC -o .libs/config.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo
>>> -c config.c -o config.o >/dev/null 2>&1
>>> mv -f .libs/config.lo config.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> external.lo -MD -MP -MF ".deps/external.Tpo" \
>>> -c -o external.lo `test -f 'external.c' || echo './'`external.c; \
>>> then mv ".deps/external.Tpo" ".deps/external.Plo"; \
>>> else rm -f ".deps/external.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/external.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF
>>> .deps/external.Tpo -c external.c -fPIC -DPIC -o .libs/external.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF
>>> .deps/external.Tpo -c external.c -o external.o >/dev/null 2>&1
>>> mv -f .libs/external.lo external.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> md5.lo -MD -MP -MF ".deps/md5.Tpo" \
>>> -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \
>>> then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \
>>> else rm -f ".deps/md5.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/md5.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c
>>> md5.c -fPIC -DPIC -o .libs/md5.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c
>>> md5.c -o md5.o >/dev/null 2>&1
>>> mv -f .libs/md5.lo md5.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> saslutil.lo -MD -MP -MF ".deps/saslutil.Tpo" \
>>> -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c; \
>>> then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \
>>> else rm -f ".deps/saslutil.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/saslutil.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF
>>> .deps/saslutil.Tpo -c saslutil.c -fPIC -DPIC -o .libs/saslutil.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF
>>> .deps/saslutil.Tpo -c saslutil.c -o saslutil.o >/dev/null 2>&1
>>> mv -f .libs/saslutil.lo saslutil.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> server.lo -MD -MP -MF ".deps/server.Tpo" \
>>> -c -o server.lo `test -f 'server.c' || echo './'`server.c; \
>>> then mv ".deps/server.Tpo" ".deps/server.Plo"; \
>>> else rm -f ".deps/server.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/server.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo
>>> -c server.c -fPIC -DPIC -o .libs/server.lo
>>> server.c: In function `sasl_setpass':
>>> server.c:151: warning: dereferencing type-punned pointer will break
>>> strict-aliasing rules
>>> server.c: In function `sasl_server_start':
>>> server.c:1245: warning: dereferencing type-punned pointer will break
>>> strict-aliasing rules
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo
>>> -c server.c -o server.o >/dev/null 2>&1
>>> mv -f .libs/server.lo server.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> seterror.lo -MD -MP -MF ".deps/seterror.Tpo" \
>>> -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c; \
>>> then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \
>>> else rm -f ".deps/seterror.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/seterror.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF
>>> .deps/seterror.Tpo -c seterror.c -fPIC -DPIC -o .libs/seterror.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF
>>> .deps/seterror.Tpo -c seterror.c -o seterror.o >/dev/null 2>&1
>>> mv -f .libs/seterror.lo seterror.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> dlopen.lo -MD -MP -MF ".deps/dlopen.Tpo" \
>>> -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \
>>> then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \
>>> else rm -f ".deps/dlopen.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/dlopen.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo
>>> -c dlopen.c -fPIC -DPIC -o .libs/dlopen.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo
>>> -c dlopen.c -o dlopen.o >/dev/null 2>&1
>>> mv -f .libs/dlopen.lo dlopen.lo
>>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
>>> -I.. -I../include -I../plugins -I../include -Wall -W -O2 -MT
>>> plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
>>> -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' ||
>>> echo './'`../plugins/plugin_common.c; \
>>> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
>>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \
>>> fi
>>> rm -f .libs/plugin_common.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF
>>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -fPIC -DPIC
>>> -o .libs/plugin_common.lo
>>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF
>>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -o
>>> plugin_common.o >/dev/null 2>&1
>>> mv -f .libs/plugin_common.lo plugin_common.lo
>>> /bin/sh ../libtool --mode=link gcc -Wall -W -O2 -o libsasl2.la
>>> -rpath /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo
>>> checkpw.lo client.lo common.lo config.lo external.lo md5.lo
>>> saslutil.lo server.lo seterror.lo dlopen.lo plugin_common.lo -ldl
>>> -lresolv -lresolv
>>> rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.*
>>> gcc -shared auxprop.lo canonusr.lo checkpw.lo client.lo common.lo
>>> config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo
>>> dlopen.lo plugin_common.lo -ldl -lresolv -lresolv -lc -Wl,-soname
>>> -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20
>>> (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20
>>> libsasl2.so.2)
>>> (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20 libsasl2.so)
>>> ar cru .libs/libsasl2.a auxprop.o canonusr.o checkpw.o client.o
>>> common.o config.o external.o md5.o saslutil.o server.o seterror.o
>>> dlopen.o plugin_common.o
>>> ranlib .libs/libsasl2.a
>>> creating libsasl2.la
>>> (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la libsasl2.la)
>>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins
>>> -I../include -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF
>>> ".deps/../plugins/sasldb.Tpo" \
>>> -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo
>>> './'`../plugins/sasldb.c; \
>>> then mv ".deps/../plugins/sasldb.Tpo" ".deps/../plugins/sasldb.Po"; \
>>> else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \
>>> fi
>>> ../plugins/sasldb.c:129: fatal error: opening dependency file
>>> .deps/../plugins/sasldb.Tpo: No such file or directory
>>> compilation terminated.
>>> make[2]: *** [../plugins/sasldb.o] Error 1
>>> make[2]: Leaving directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
>>> make[1]: *** [all-recursive] Error 1
>>> make[1]: Leaving directory
>>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>>> make: *** [all] Error 2
>>> [root at genie cyrus-sasl-2.1.20]#
>>>
>>> --
>>> Fedora-directory-users mailing list
>>> Fedora-directory-users at redhat.com
>>> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> --
>> Fedora-directory-users mailing list
>> Fedora-directory-users at redhat.com
>> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>>
>>
>
>------------------------------------------------------------------------
>
>--
>Fedora-directory-users mailing list
>Fedora-directory-users at redhat.com
>https://www.redhat.com/mailman/listinfo/fedora-directory-users
>
>
More information about the Fedora-directory-users
mailing list