install-guide fedora-install-guide-adminoptions-en.xml, 1.7, 1.8 fedora-install-guide-en.xml, 1.39, 1.40 fedora-install-guide-firstboot-en.xml, 1.17, 1.18 fedora-install-guide-packageselection-en.xml, 1.16, 1.17 rpm-info.xml, 1.4, 1.5
Stuart Ellis (elliss)
fedora-docs-commits at redhat.com
Thu Jan 26 00:15:47 UTC 2006
Author: elliss
Update of /cvs/docs/install-guide
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv3265
Modified Files:
fedora-install-guide-adminoptions-en.xml
fedora-install-guide-en.xml
fedora-install-guide-firstboot-en.xml
fedora-install-guide-packageselection-en.xml rpm-info.xml
Log Message:
- Updated Package Selection section to match test2 screen.
- Broke Boot Options section on configuring the installation system into subsections for clarity.
- Amended Boot Options section to cover rescue discs.
- Minor style edit of text describing firewall configuration.
Index: fedora-install-guide-adminoptions-en.xml
===================================================================
RCS file: /cvs/docs/install-guide/fedora-install-guide-adminoptions-en.xml,v
retrieving revision 1.7
retrieving revision 1.8
diff -u -r1.7 -r1.8
--- fedora-install-guide-adminoptions-en.xml 23 Jan 2006 23:24:09 -0000 1.7
+++ fedora-install-guide-adminoptions-en.xml 26 Jan 2006 00:15:39 -0000 1.8
@@ -3,8 +3,8 @@
<chapter id="ch-admin-options">
<title>Appendix: Boot Options</title>
<para>
- The &FED; installation system includes a range of options and
- functions for administrators. To use boot options, enter
+ The &FED; installation system includes a range of functions and
+ options for administrators. To use boot options, enter
<userinput>linux <replaceable>option</replaceable></userinput> at
the
<prompt>boot:</prompt>
@@ -17,6 +17,16 @@
<screen>
<userinput>linux <replaceable>option1</replaceable> <replaceable>option2</replaceable> <replaceable>option3</replaceable></userinput>
</screen>
+ <note>
+ <title>Rescue Mode</title>
+
+ <para>
+ The &FED; installation and <firstterm>rescue discs</firstterm> may
+ either boot with <firstterm>rescue mode</firstterm> , or load the
+ installation system. For more information on rescue discs and
+ rescue mode, refer to <xref linkend="sn-mode-rescue"/>.
+ </para>
+ </note>
<section id="sn-bootoptions-installer">
<title>Configuring the Installation System</title>
@@ -31,6 +41,11 @@
<itemizedlist>
<listitem>
<para>
+ Language
+ </para>
+ </listitem>
+ <listitem>
+ <para>
Display resolution
</para>
</listitem>
@@ -50,59 +65,80 @@
</para>
</listitem>
</itemizedlist>
-<!-- SE: May want to add the lang=language_code option to this section as well. -->
- <para>
- You may force the installation system to use the lowest possible
- screen resolution (640x480) with the <option>lowres</option>
- option. To use a specific display resolution, enter
- <option>resolution=<replaceable>setting</replaceable></option> as
- a boot option. For example, to set the display resolution to
- 1024x768, enter:
- </para>
+
+ <section id="sn-boot-options-language">
+ <title>Specifying the Language</title>
+
+ <para>
+ To set the language for the installation process screens,
+ specify the ISO code for that language with the
+ <option>lang</option> option. For example, the ISO code
+ <userinput>fr</userinput> identifies the French language:
+ </para>
+<screen>
+<userinput>linux lang=<replaceable>fr</replaceable></userinput>
+</screen>
+ </section>
+
+ <section id="sn-boot-options-interface">
+ <title>Configuring the Interface</title>
+
+ <para>
+ You may force the installation system to use the lowest possible
+ screen resolution (640x480) with the <option>lowres</option>
+ option. To use a specific display resolution, enter
+ <option>resolution=<replaceable>setting</replaceable></option>
+ as a boot option. For example, to set the display resolution to
+ 1024x768, enter:
+ </para>
<screen>
<userinput>linux resolution=<replaceable>1024x768</replaceable></userinput>
</screen>
- <para>
- To run the installation process in <option>text</option> mode,
- enter:
- </para>
+ <para>
+ To run the installation process in <option>text</option> mode,
+ enter:
+ </para>
<screen>
<userinput>linux text</userinput>
</screen>
- <para>
- To enable support for a serial console, enter
- <option>serial</option> as an additional option.
- </para>
+ <para>
+ To enable support for a serial console, enter
+ <option>serial</option> as an additional option.
+ </para>
+ </section>
- <para>
- Use the <option>askmethod</option> option to display additional
- menus that enable you to specify the installation method network
- settings. You may also configure the installation method and
- network settings at the
- <prompt>boot:</prompt>
- prompt itself.
- </para>
+ <section id="sn-boot-options-installmethod">
+ <title>Specifying the Installation Method</title>
- <para>
- To specify the installation method from the
- <prompt>boot:</prompt>
- prompt, use the <option>method</option> option. Refer to
- <xref linkend="tb-installmethods"/> for the supported installation
- methods.
- </para>
- <table id="tb-installmethods">
- <title>Installation Methods</title>
- <tgroup cols="2">
- <colspec colnum="1" colname="Installation Method"/>
- <colspec colnum="2" colname="Option Format"/>
- <thead>
- <row>
+ <para>
+ Use the <option>askmethod</option> option to display additional
+ menus that enable you to specify the installation method and
+ network settings. You may also configure the installation method
+ and network settings at the
+ <prompt>boot:</prompt>
+ prompt itself.
+ </para>
+
+ <para>
+ To specify the installation method from the
+ <prompt>boot:</prompt>
+ prompt, use the <option>method</option> option. Refer to
+ <xref linkend="tb-installmethods"/> for the supported
+ installation methods.
+ </para>
+ <table id="tb-installmethods">
+ <title>Installation Methods</title>
+ <tgroup cols="2">
+ <colspec colnum="1" colname="Installation Method"/>
+ <colspec colnum="2" colname="Option Format"/>
+ <thead>
+ <row>
<entry>Installation Method</entry>
<entry>Option Format</entry>
- </row>
- </thead>
- <tbody>
- <row>
+ </row>
+ </thead>
+ <tbody>
+ <row>
<entry>
<para>
CD or DVD drive
@@ -113,8 +149,8 @@
<option>method=<replaceable>cdrom</replaceable></option>
</para>
</entry>
- </row>
- <row>
+ </row>
+ <row>
<entry>
<para>
Hard Drive
@@ -125,8 +161,8 @@
<option>method=<replaceable>hd://device/</replaceable></option>
</para>
</entry>
- </row>
- <row>
+ </row>
+ <row>
<entry>
<para>
HTTP Server
@@ -137,8 +173,8 @@
<option>method=<replaceable>http://server.example.com/directory/</replaceable></option>
</para>
</entry>
- </row>
- <row>
+ </row>
+ <row>
<entry>
<para>
FTP Server
@@ -149,8 +185,8 @@
<option>method=<replaceable>ftp://server.example.com/directory/</replaceable></option>
</para>
</entry>
- </row>
- <row>
+ </row>
+ <row>
<entry>
<para>
NFS Server
@@ -161,37 +197,44 @@
<option>method=<replaceable>nfs:server.example.com:/directory/</replaceable></option>
</para>
</entry>
- </row>
- </tbody>
- </tgroup>
- </table>
- <para>
- By default, the installation system uses DHCP to automatically
- obtain the correct network settings. To manually configure the
- network settings yourself, either enter them in the
- <guilabel>Configure TCP/IP</guilabel> screen, or at the
- <prompt>boot:</prompt>
- prompt. You may specify the <option>ip</option> address,
- <option>netmask</option>, <option>gateway</option>, and
- <option>dns</option> server settings for the installation system
- at the prompt. If you specify the network configuration at the
- <prompt>boot:</prompt>
- prompt, these settings are used for the installation process, and
- the <guilabel>Configure TCP/IP</guilabel> screen does not appear.
- </para>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </section>
- <para>
- This example configures the network settings for an installation
- system that uses the IP address
- <systemitem class="ipaddress">192.168.1.10</systemitem>:
- </para>
+ <section id="sn-boot-options-network">
+ <title>Manually Configuring the Network Settings</title>
+
+ <para>
+ By default, the installation system uses DHCP to automatically
+ obtain the correct network settings. To manually configure the
+ network settings yourself, either enter them in the
+ <guilabel>Configure TCP/IP</guilabel> screen, or at the
+ <prompt>boot:</prompt>
+ prompt. You may specify the <option>ip</option> address,
+ <option>netmask</option>, <option>gateway</option>, and
+ <option>dns</option> server settings for the installation system
+ at the prompt. If you specify the network configuration at the
+ <prompt>boot:</prompt>
+ prompt, these settings are used for the installation process,
+ and the <guilabel>Configure TCP/IP</guilabel> screen does not
+ appear.
+ </para>
+
+ <para>
+ This example configures the network settings for an installation
+ system that uses the IP address
+ <systemitem class="ipaddress">192.168.1.10</systemitem>:
+ </para>
<screen>
<userinput>linux ip=<replaceable>192.168.1.10</replaceable> netmask=<replaceable>255.255.255.0</replaceable> gateway=<replaceable>192.168.1.1</replaceable> dns=<replaceable>192.168.1.2,192.168.1.3</replaceable></userinput>
</screen>
+ </section>
</section>
<section id="sn-remote-installation">
<title>Enabling Remote Access to the Installation System</title>
-<!-- SE: Note that there is also a "display" option that redirects anaconda's X display to an X server on another system. -->
+
<para>
You may access either graphical or text interfaces for the
installation system from any other system. Access to a text mode
@@ -325,8 +368,9 @@
<prompt>boot:</prompt>
prompt:
</para>
+<!--SE: The "text" option is necessary to stop the installer switching to graphical mode and losing the telnet interface. Possibly a bug. -->
<screen>
-<userinput>linux telnet</userinput>
+<userinput>linux text telnet</userinput>
</screen>
<para>
You may then connect to the installation system with the
@@ -337,10 +381,16 @@
<screen>
<userinput>telnet computer.mydomain.com</userinput>
</screen>
- <para>
- <remark role="FIXME">No password option for telnet ?
- </remark>
- </para>
+ <caution>
+ <title>Telnet Access Requires No Password</title>
+
+ <para>
+ To ensure the security of the installation process, only use the
+ <option>telnet</option> option to install systems on networks
+ with restricted access.
+ </para>
+ </caution>
+<!-- SE: Note that there is also a "display" option that redirects anaconda's X display to an X server on another system. There is also a "syslog" option to route logging to a remote system. -->
</section>
<section id="sn-automating-installation">
<title>Automating the Installation with Kickstart</title>
@@ -509,7 +559,7 @@
<section id="sn-bootoptions-driverdisks">
<title>Adding Hardware Support with Driver Disks</title>
-<!-- SE: This section is untested. -->
+<!-- SE: This section is untested - there seem to be very few driver disks for Fedora. -->
<para>
The installation system may load drivers from disks, pen drives,
or network servers to configure support for new devices. After
@@ -731,7 +781,7 @@
<row>
<entry>
<para>
- Disable Direct Memory Access (DMA) for storage
+ Disable Direct Memory Access (DMA) for IDE drives
</para>
</entry>
<entry>
@@ -845,7 +895,7 @@
<title>Using the Maintenance Boot Modes</title>
<section id="sn-memtest">
- <title>Memory (RAM) Testing Mode</title>
+ <title>Loading the Memory (RAM) Testing Mode</title>
<para>
Faults in memory modules may cause your system to freeze or
@@ -871,51 +921,36 @@
</section>
<section id="sn-mode-rescue">
- <title>Booting Your Computer with Rescue Mode</title>
+ <title>Booting Your Computer with the Rescue Mode</title>
<para>
- You may use the first installation disc to boot a command-line
- Linux system, without installing &FED; on the computer. This
- rescue system may access the drives on your computer. Rescue
- mode enables you to use the utilities and functions of a running
- system to modify or repair an installed system.
+ You may boot a command-line Linux system from either a rescue
+ disc or the first installation disc, without installing &FED; on
+ the computer. This enables you to use the utilities and
+ functions of a running Linux system to modify or repair an
+ installed system.
</para>
<para>
- To load the rescue mode, enter:
+ The rescue disc starts the rescue mode system by default. To
+ load the rescue system with the first installation disc, enter:
</para>
<screen>
<userinput>linux rescue</userinput>
</screen>
<para>
Specify the language, keyboard layout and network settings for
- the rescue system with the screens that follow.
- </para>
-
- <para>
- <remark role="FIXME">Add a note that the boot and rescue CDs also have this facility.
- </remark>
- </para>
- </section>
-<!-- SE: To be useful, this needs an explanation of how it differs from providing driver disks.
-
- <section id="sn-mode-expert">
- <title>Installing &FC; with Expert Mode</title>
-
- <para>
- The <option>expert</option> mode enables you to run the
- installation process with additional options for hardware
- configuration.
+ the rescue system with the screens that follow. The final setup
+ screen configures access to the existing system on your
+ computer.
</para>
<para>
- To run the installation process in expert mode, enter:
+ By default, rescue mode attaches an existing operating system to
+ the rescue system under the directory
+ <filename>/mnt/sysimage/</filename>.
</para>
-<screen>
- <userinput>linux expert</userinput>
-</screen>
</section>
--->
</section>
</chapter>
Index: fedora-install-guide-en.xml
===================================================================
RCS file: /cvs/docs/install-guide/fedora-install-guide-en.xml,v
retrieving revision 1.39
retrieving revision 1.40
diff -u -r1.39 -r1.40
--- fedora-install-guide-en.xml 23 Jan 2006 23:24:09 -0000 1.39
+++ fedora-install-guide-en.xml 26 Jan 2006 00:15:39 -0000 1.40
@@ -6,14 +6,14 @@
<!ENTITY DOCNAME "fedora-install-guide">
<!ENTITY DOCLANG "en">
-<!ENTITY DOCVERSION "1.14">
-<!ENTITY DOCDATE "2006-01-23">
+<!ENTITY DOCVERSION "1.15">
+<!ENTITY DOCDATE "2006-01-26">
<!ENTITY DOCID "&DOCNAME;-&DOCLANG;-&DOCVERSION; (&DOCDATE;)">
<!-- Bugzilla bug number for the draft notice -->
<!ENTITY BUG-NUM "129911">
<!ENTITY FCLOCALVER "5">
-<!ENTITY DOCLOCALVER "1.14"> <!-- what's this for again? -->
+<!ENTITY DOCLOCALVER "1.15"> <!-- what's this for again? -->
<!ENTITY FDP-INFO SYSTEM "fdp-info-en.xml" >
<!ENTITY INTRODUCTION SYSTEM "fedora-install-guide-intro-en.xml">
Index: fedora-install-guide-firstboot-en.xml
===================================================================
RCS file: /cvs/docs/install-guide/fedora-install-guide-firstboot-en.xml,v
retrieving revision 1.17
retrieving revision 1.18
diff -u -r1.17 -r1.18
--- fedora-install-guide-firstboot-en.xml 23 Jan 2006 23:24:09 -0000 1.17
+++ fedora-install-guide-firstboot-en.xml 26 Jan 2006 00:15:39 -0000 1.18
@@ -118,18 +118,17 @@
<para>
To enable access to other services, enter the required ports in
- the <guilabel>Other ports:</guilabel> field. For each port,
- specify the port number followed by the connection type, in the
- format
+ the <guilabel>Other ports:</guilabel> field. For each port, you
+ must specify the port as TCP or UDP, in addition to the port
+ number. Use the format
<userinput><replaceable>portnumber</replaceable>:<replaceable>type</replaceable></userinput>.
The majority of services use TCP ports.
</para>
<para>
- For example, to allow other systems to access mail with the
- <systemitem class="protocol">IMAP</systemitem> protocol, which may
- use both TCP port 143 and TCP port 993, enter <userinput>143:tcp,
- 993:tcp</userinput>.
+ For example, enter <userinput>143:tcp, 993:tcp</userinput> to
+ allow users to access mail from other systems with the IMAP
+ protocol, which may use both TCP port 143 and TCP port 993.
</para>
<para>
Index: fedora-install-guide-packageselection-en.xml
===================================================================
RCS file: /cvs/docs/install-guide/fedora-install-guide-packageselection-en.xml,v
retrieving revision 1.16
retrieving revision 1.17
diff -u -r1.16 -r1.17
--- fedora-install-guide-packageselection-en.xml 4 Dec 2005 23:15:24 -0000 1.16
+++ fedora-install-guide-packageselection-en.xml 26 Jan 2006 00:15:39 -0000 1.17
@@ -2,147 +2,92 @@
<chapter id="ch-packageselection">
<title>Package Selection</title>
- <warning>
- <title>Obsolete</title>
-
- <para>
- &FC; &FCLOCALVER; will have a new package selection interface. This
- has not been completed for test1. The content in this section will
- be replaced after test2.
- </para>
- </warning>
<para>
- &FED; uses the installation type to select a set of software
- packages for your system. Refer to
- <xref linkend="ch-installtypes"
- /> for more information. You can
- accept this default set of packages, or customize it to fit your
- preferences. If you choose the <guilabel>Custom</guilabel>
- installation type, &FED; displays the screen for <guilabel>Package
- Group Selection</guilabel> automatically.
+ By default, the &FED; installation process loads a selection of
+ software that is suitable for a desktop system. This screen enables
+ you to customize the set of software to match your requirements.
+ </para>
+ <para>
+ &FED; divides included software into
+ <indexterm>
+ <primary>package groups</primary>
+ </indexterm>
+ <firstterm>package groups</firstterm>. For ease of use, this screen
+ displays the package groups in six categories:
+ </para>
+ <figure id="fig-package-selection">
+ <title>Package Group Selection Screen</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata align="center" fileref="./figs/package-selection.eps" format="EPS"/>
+ </imageobject>
+ <imageobject>
+ <imagedata align="center" fileref="./figs/package-selection.png" format="PNG"/>
+ </imageobject>
+ <textobject>
+ <phrase>
+ Package group selection screen.
+ </phrase>
+ </textobject>
+ </mediaobject>
+ </figure>
+ <para>
+ To view the package groups for a category, select the category from
+ the list on the left. The list on the right displays the package
+ groups for the currently selected category.
+ </para>
+ <para>
+ To specify a package group for installation, select the checkbox
+ next to the group. The box at the bottom of the screen displays the
+ details of the package group that is currently highlighted.
+ <emphasis>None</emphasis> of the packages from a group will be
+ installed unless the checkbox for that group is selected.
</para>
+ <para>
+ If you select a package group, &FED; automatically installs the base
+ and mandatory packages for that group. To change which optional
+ packages within a selected group will be installed, select the
+ <guibutton>Optional Packages</guibutton> button under the
+ description of the group. Change the selection of
+ <guibutton>Optional Packages</guibutton> by using the checkbox next
+ to the name of the individual package.
+ </para>
+ <figure id="fig-package-selection-details">
+ <title>Package Group Details Dialog</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata align="center" fileref="./figs/package-selection-details.eps" format="EPS"/>
+ </imageobject>
+ <imageobject>
+ <imagedata align="center" fileref="./figs/package-selection-details.png" format="PNG"/>
+ </imageobject>
+ <textobject>
+ <phrase>
+ Package group details dialog.
+ </phrase>
+ </textobject>
+ </mediaobject>
+ </figure>
<tip>
<title>Changing Your Mind</title>
<para>
- The installation type and packages that you select are not
- permanent. After you boot your system, use the
- <application>Package Management</application> tool to make
+ The packages that you select are not permanent. After you boot
+ your system, use the <application>pirut</application> tool to make
different software selections for your system. To run this tool,
- from the main menu, select <menuchoice> <guimenu>System</guimenu>
- <guisubmenu>Administration</guisubmenu> <guimenuitem>Add/Remove
- Applications</guimenuitem> </menuchoice>.
+ from the main menu, select <menuchoice>
+ <guimenu>Applications</guimenu> <guisubmenu>System
+ Tools</guisubmenu> <guimenuitem>Add/Remove Software</guimenuitem>
+ </menuchoice>.
</para>
</tip>
- <section id="sn-defaultpackages">
- <title>Package Installation Defaults</title>
-
- <para>
- A summary of the default package selection is displayed.
- </para>
- <figure id="fig-package-default">
- <title>Package Installation Defaults Screen</title>
- <mediaobject>
- <imageobject>
- <imagedata align="center" fileref="./figs/package-default.eps" format="EPS"/>
- </imageobject>
- <imageobject>
- <imagedata align="center" fileref="./figs/package-default.png" format="PNG"/>
- </imageobject>
- <textobject>
- <phrase>
- Package installation defaults screen.
- </phrase>
- </textobject>
- </mediaobject>
- </figure>
- <para>
- To accept the default package selection, select <guilabel>Install
- the default software packages</guilabel>. Select
- <guilabel>Next</guilabel> to continue, and proceed to
- <xref
- linkend="ch-abouttoinstall" />.
- </para>
-
- <para>
- To view or change the packages, select <guilabel>Customize
- software packages to be installed</guilabel>. Select
- <guilabel>Next</guilabel> to continue, and proceed to
- <xref
- linkend="sn-packagegroups" />.
- </para>
- </section>
- <section id="sn-packagegroups">
- <title>Package Group Selection</title>
-
- <para>
- &FC; divides included software into <indexterm>
- <primary>package groups</primary>
- </indexterm> <firstterm>package groups</firstterm> that make
- software selection easier.
- </para>
- <figure id="fig-package-selection">
- <title>Package Group Selection Screen</title>
- <mediaobject>
- <imageobject>
- <imagedata align="center" fileref="./figs/package-selection.eps" format="EPS"/>
- </imageobject>
- <imageobject>
- <imagedata align="center" fileref="./figs/package-selection.png" format="PNG"/>
- </imageobject>
- <textobject>
- <phrase>
- Package group selection screen.
- </phrase>
- </textobject>
- </mediaobject>
- </figure>
- <para>
- The default groups for the chosen installation type are already
- selected. Select or remove any group of packages as desired.
- <emphasis>None</emphasis> of the packages from a group will be
- installed unless the checkbox next to the group is selected.
- </para>
-
- <para>
- To change which packages within a selected group will be
- installed, select the <guilabel>Details</guilabel> link next to
- the name of the group. &FC; automatically installs <guilabel>Base
- Packages</guilabel> of a group if the group is selected. Change
- the selection of <guilabel>Optional Packages</guilabel> by using
- the checkbox next to the name of the individual package.
- </para>
-
- <para>
- &FC; lists with each group the number of packages currently
- selected for installation, and the total number of packages within
- that group.
- </para>
- <figure id="fig-package-selection-details">
- <title>Package Group Details Dialog</title>
- <mediaobject>
- <imageobject>
- <imagedata align="center" fileref="./figs/package-selection-details.eps" format="EPS"/>
- </imageobject>
- <imageobject>
- <imagedata align="center" fileref="./figs/package-selection-details.png" format="PNG"/>
- </imageobject>
- <textobject>
- <phrase>
- Package group details dialog.
- </phrase>
- </textobject>
- </mediaobject>
- </figure>
- </section>
<section id="sn-lang-packages">
<title>Additional Language Support</title>
<para>
Your &FC; system automatically supports the language that you
selected at the start of the installation process. To include
- support for additional languages, select the packages for those
- languages from the <guilabel>Language Support</guilabel> package
- group.
+ support for additional languages, select the package group for
+ those languages from the <guilabel>Languages</guilabel> category.
</para>
<warning>
@@ -155,50 +100,12 @@
</para>
</warning>
</section>
- <section id="sn-extreme-packagegroups">
- <title><guilabel>Everything</guilabel> or <guilabel>Minimal</guilabel>
- Installations</title>
-
- <para>
- Two of the groups under the heading of
- <guilabel>Miscellaneous</guilabel> are incompatible with the
- others. If you select either of these groups, your other group
- selections become invalid.
- </para>
-
- <para>
- If you select <guilabel>Everything</guilabel>, &FC; installs
- <emphasis>all</emphasis> of the packages provided. Although &FC;
- installs many additional network services in this package group,
- some are not enabled after installation. This option may be useful
- for some testing and development purposes.
- </para>
-
- <caution>
- <title>Storage Requirements</title>
-
- <para>
- The <guilabel>Everything</guilabel> installation fills
- approximately 6.9Gb of free disk space, and temporarily requires
- an additional 175Mb of disk space during the installation
- process. Refer to the Release Notes for more information about
- storage requirements.
- </para>
- </caution>
-
- <para>
- The <guilabel>Minimal</guilabel> package group provides only the
- essential packages to create a bootable system. This package group
- provides no graphical interface.
- </para>
-
- <para>
- After you choose the desired packages, select
- <guilabel>Next</guilabel> to proceed. &FC; checks your selection,
- and automatically adds any extra packages required to use the
- software you select.
- </para>
- </section>
+ <para>
+ After you choose the desired packages, select
+ <guilabel>Next</guilabel> to proceed. &FC; checks your selection,
+ and automatically adds any extra packages required to use the
+ software you select.
+ </para>
</chapter>
<!--
Index: rpm-info.xml
===================================================================
RCS file: /cvs/docs/install-guide/rpm-info.xml,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -r1.4 -r1.5
--- rpm-info.xml 23 Jan 2006 23:24:09 -0000 1.4
+++ rpm-info.xml 26 Jan 2006 00:15:39 -0000 1.5
@@ -28,10 +28,15 @@
<!--PLEASE ADD A TRANSLATION FOR EACH ADDITIONAL LANGUAGE.-->
</titles>
<changelog order="newest-first">
+ <revision date="2006-01-26" number="1.15" role="doc">
+ <author worker="StuartEllis"/>
+<!--PLEASE SET "lang" ATTRIBUTE IN DETAILS WHERE NEEDED-->
+ <details>Updated Package Selection screen for test2.</details>
+ </revision>
<revision date="2006-01-23" number="1.14" role="doc">
<author worker="StuartEllis"/>
<!--PLEASE SET "lang" ATTRIBUTE IN DETAILS WHERE NEEDED-->
- <details>Updated for FC5 test2.</details>
+ <details lang="en">Updated for FC5 test2.</details>
</revision>
<revision date="Tue Jan 17 2006" number="0" role="rpm">
<author worker="megacoder"/>
More information about the Fedora-docs-commits
mailing list