From bermejator at hotmail.com Tue Mar 6 17:21:27 2007 From: bermejator at hotmail.com (BerMeJo) Date: Tue, 06 Mar 2007 18:21:27 +0100 Subject: Problemas con samba In-Reply-To: <200702212123.45424.sekinmor@yahoo.com.ar> References: <200702212123.45424.sekinmor@yahoo.com.ar> Message-ID: <45EDA317.6040106@hotmail.com> Saludos a todos... Vuelvo a pediros ayuda, puesto que llevo unos dias tratando de configurar samba y no lo consigo del todo, ya no se que hacer... Tengo dos m?quinas, una freebsd y otra con nuestra querida u odiada fedora. Ambas m?quinas tienen dos usuarios, tanto en el sistema como en el servidor samba mediante smbpasswd. La conexi?n en direcci?n fedora -> bsd funciona a la perfecci?n, ambos usuarios conectan y tengo acceso a los recursos compartidos. No pasa lo mismo en direccion bsd -> fedora, un usuario me conecta y el otro me devuelve siempre el mismo error: tree connect failed: NT_STATUS_BAD_NETWORK_NAME He probado de todo y ya no se que hacer.... Mi smb.conf: # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # For a step to step guide on installing, configuring and using samba, # read the Samba-HOWTO-Collection. This may be obtained from: # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf # # Many working examples of smb.conf files can be found in the # Samba-Guide which is generated daily and can be downloaded from: # http://www.samba.org/samba/docs/Samba-Guide.pdf # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ===================================== [global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH workgroup = CIBERCASA # server string is the equivalent of the NT Description field server string = %h Servidor SAMBA # Security mode. Defines in which mode Samba will operate. Possible # values are share, user, server, domain and ads. Most people will want # user level security. See the Samba-HOWTO-Collection for details. security = user # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page ; hosts allow = 192.168.1. 192.168.2. 127. hosts allow = 192.168.1.120 192.168.1.150 192.168.1.200 192.168.1.100 # If you want to automatically load your printer list rather # than setting them up individually then you'll need this load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # This option tells cups that the data has already been rasterized cups options = raw # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/%m.log # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/samba/lib/smb.conf.%m # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 interfaces = 192.168.1.0/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no username map = /etc/samba/smbusers ; encrypt passwords = yes ; guest ok = no ; guest account = nobody # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g passdb backend = smbpasswd #============================ Share Definitions ============================== #[homes] ; comment = Home Directories ; browseable = no ; writeable = yes # Un-comment the following and create the netlogon directory for Domain Logons ; [netlogon] ; comment = Network Logon Service ; path = /usr/local/samba/lib/netlogon ; guest ok = yes ; writable = no ; share modes = no # Un-comment the following to provide a specific roving profile share # the default is to use the user's home directory ;[Profiles] ; path = /usr/local/samba/profiles ; browseable = no ; guest ok = yes [Musica] comment = Mi Musiquita path = /home/BerMeJo/Almacen/Musica browseable = yes writeable = yes [Peliculas] comment = Mis Peliculas path = /home/BerMeJo/Almacen/Pelis browseable = yes writeable = yes [Software] comment = Software necesario path = /home/BerMeJo/Almacen/Software browseable = yes writeable = yes # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = All Printers path = /usr/spool/samba browseable = no # Set public = yes to allow user 'guest account' to print ; guest ok = no ; writeable = no printable = yes valid users = BerMeJo Lolilla write list = BerMeJo # This one is useful for people to share files ;[tmp] ; comment = Temporary file space ; path = /tmp ; read only = no ; public = yes # A publicly accessible directory, but read only, except for people in # the "staff" group ;[public] ; comment = Public Stuff ; path = /home/samba ; public = yes ; writable = yes ; printable = no ; write list = @staff # Other examples. # # A private printer, usable only by fred. Spool data will be placed in fred's # home directory. Note that fred must have write access to the spool directory, # wherever it is. ;[fredsprn] ; comment = Fred's Printer ; valid users = fred ; path = /homes/fred ; printer = freds_printer ; public = no ; writable = no ; printable = yes # A private directory, usable only by fred. Note that fred requires write # access to the directory. ;[fredsdir] ; comment = Fred's Service ; path = /usr/somewhere/private ; valid users = fred ; public = no ; writable = yes ; printable = no # a service which has a different directory for each machine that connects # this allows you to tailor configurations to incoming machines. You could # also use the %U option to tailor it by user name. # The %m gets replaced with the machine name that is connecting. ;[pchome] ; comment = PC Directories ; path = /usr/pc/%m ; public = no ; writable = yes # A publicly accessible directory, read/write to all users. Note that all files # created in the directory by users will be owned by the default user, so # any user with access can delete any other user's files. Obviously this # directory must be writable by the default user. Another user could of course # be specified, in which case all files would be owned by that user instead. ;[public] ; path = /usr/somewhere/else/public ; public = yes ; only guest = yes ; writable = yes ; printable = no # The following two entries demonstrate how to share a directory so that two # users can place files there that will be owned by the specific users. In this # setup, the directory should be writable by both users and should have the # sticky bit set on it to prevent abuse. Obviously this could be extended to # as many users as required. ;[myshare] ; comment = Mary's and Fred's stuff ; path = /usr/somewhere/shared ; valid users = mary fred ; public = no ; writable = yes ; printable = no ; create mask = 0765 Please HELP!!!! Graciasy un abrazo a todos de antemano Rub?n Lara From knowhow at sistemasyconectividad.com.mx Wed Mar 7 08:00:09 2007 From: knowhow at sistemasyconectividad.com.mx (Julio Cesar =?ISO-8859-1?Q?S=E1nchez_Gonz=E1lez?=) Date: Wed, 07 Mar 2007 02:00:09 -0600 Subject: Problemas con samba In-Reply-To: <45EDA317.6040106@hotmail.com> References: <200702212123.45424.sekinmor@yahoo.com.ar> <45EDA317.6040106@hotmail.com> Message-ID: <1173254409.9833.4.camel@localhost> Si no necesitas autenticacion puedes usar security = share y si la necesitas puedes tener problemas de permisos en carpetas o no haz creado al usuario con smbpasswd aunque tambien necesita existir en /etc/passwd dicho usuario. Prueba con smbclient -L //192.168.1.5 --user=tu_usuario o verifica tu smb.conf con testparm Saludos ;) Julio Cesar S?nchez Gonz?lez El mar, 06-03-2007 a las 18:21 +0100, BerMeJo escribi?: > Saludos a todos... > > Vuelvo a pediros ayuda, puesto que llevo unos dias tratando de > configurar samba y no lo consigo del todo, ya no se que hacer... > > Tengo dos m?quinas, una freebsd y otra con nuestra querida u odiada > fedora. Ambas m?quinas tienen dos usuarios, tanto en el sistema como en > el servidor samba mediante smbpasswd. > > La conexi?n en direcci?n fedora -> bsd funciona a la perfecci?n, ambos > usuarios conectan y tengo acceso a los recursos compartidos. > > No pasa lo mismo en direccion bsd -> fedora, un usuario me conecta y el > otro me devuelve siempre el mismo error: > tree connect failed: NT_STATUS_BAD_NETWORK_NAME > > He probado de todo y ya no se que hacer.... > > Mi smb.conf: > # This is the main Samba configuration file. You should read the > # smb.conf(5) manual page in order to understand the options listed > # here. Samba has a huge number of configurable options (perhaps too > # many!) most of which are not shown in this example > # > # For a step to step guide on installing, configuring and using samba, > # read the Samba-HOWTO-Collection. This may be obtained from: > # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf > # > # Many working examples of smb.conf files can be found in the > # Samba-Guide which is generated daily and can be downloaded from: > # http://www.samba.org/samba/docs/Samba-Guide.pdf > # > # Any line which starts with a ; (semi-colon) or a # (hash) > # is a comment and is ignored. In this example we will use a # > # for commentry and a ; for parts of the config file that you > # may wish to enable > # > # NOTE: Whenever you modify this file you should run the command "testparm" > # to check that you have not made any basic syntactic errors. > # > #======================= Global Settings > ===================================== > [global] > > # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH > workgroup = CIBERCASA > > # server string is the equivalent of the NT Description field > server string = %h Servidor SAMBA > > # Security mode. Defines in which mode Samba will operate. Possible > # values are share, user, server, domain and ads. Most people will want > # user level security. See the Samba-HOWTO-Collection for details. > security = user > > # This option is important for security. It allows you to restrict > # connections to machines which are on your local network. The > # following example restricts access to two C class networks and > # the "loopback" interface. For more examples of the syntax see > # the smb.conf man page > ; hosts allow = 192.168.1. 192.168.2. 127. > hosts allow = 192.168.1.120 192.168.1.150 192.168.1.200 192.168.1.100 > > > # If you want to automatically load your printer list rather > # than setting them up individually then you'll need this > load printers = yes > > # you may wish to override the location of the printcap file > ; printcap name = /etc/printcap > > # on SystemV system setting printcap name to lpstat should allow > # you to automatically obtain a printer list from the SystemV spool > # system > ; printcap name = lpstat > > # It should not be necessary to specify the print system type unless > # it is non-standard. Currently supported print systems include: > # bsd, cups, sysv, plp, lprng, aix, hpux, qnx > ; printing = cups > > # This option tells cups that the data has already been rasterized > cups options = raw > > # Uncomment this if you want a guest account, you must add this to > /etc/passwd > # otherwise the user "nobody" is used > ; guest account = pcguest > > # this tells Samba to use a separate log file for each machine > # that connects > log file = /var/log/samba/%m.log > > # Put a capping on the size of the log files (in Kb). > max log size = 50 > > # Use password server option only with security = server > # The argument list may include: > # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] > # or to auto-locate the domain controller/s > # password server = * > ; password server = > > # Use the realm option only with security = ads > # Specifies the Active Directory realm the host is part of > ; realm = MY_REALM > > # Backend to store user information in. New installations should > # use either tdbsam or ldapsam. smbpasswd is available for backwards > # compatibility. tdbsam requires no further configuration. > ; passdb backend = tdbsam > > # Using the following line enables you to customise your configuration > # on a per machine basis. The %m gets replaced with the netbios name > # of the machine that is connecting. > # Note: Consider carefully the location in the configuration file of > # this line. The included file is read at that point. > ; include = /usr/local/samba/lib/smb.conf.%m > > # Configure Samba to use multiple interfaces > # If you have multiple network interfaces then you must list them > # here. See the man page for details. > ; interfaces = 192.168.12.2/24 192.168.13.2/24 > interfaces = 192.168.1.0/24 > > # Browser Control Options: > # set local master to no if you don't want Samba to become a master > # browser on your network. Otherwise the normal election rules apply > ; local master = no > > # OS Level determines the precedence of this server in master browser > # elections. The default value should be reasonable > ; os level = 33 > > # Domain Master specifies Samba to be the Domain Master Browser. This > # allows Samba to collate browse lists between subnets. Don't use this > # if you already have a Windows NT domain controller doing this job > ; domain master = yes > > # Preferred Master causes Samba to force a local browser election on startup > # and gives it a slightly higher chance of winning the election > ; preferred master = yes > > # Enable this if you want Samba to be a domain logon server for > # Windows95 workstations. > ; domain logons = yes > > # if you enable domain logons then you may want a per-machine or > # per user logon script > # run a specific logon batch file per workstation (machine) > ; logon script = %m.bat > # run a specific logon batch file per username > ; logon script = %U.bat > > # Where to store roving profiles (only for Win95 and WinNT) > # %L substitutes for this servers netbios name, %U is username > # You must uncomment the [Profiles] share below > ; logon path = \\%L\Profiles\%U > > # Windows Internet Name Serving Support Section: > # WINS Support - Tells the NMBD component of Samba to enable it's WINS > Server > ; wins support = yes > > # WINS Server - Tells the NMBD components of Samba to be a WINS Client > # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both > ; wins server = w.x.y.z > > # WINS Proxy - Tells Samba to answer name resolution queries on > # behalf of a non WINS capable client, for this to work there must be > # at least one WINS Server on the network. The default is NO. > ; wins proxy = yes > > # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names > # via DNS nslookups. The default is NO. > dns proxy = no > username map = /etc/samba/smbusers > ; encrypt passwords = yes > ; guest ok = no > ; guest account = nobody > > # These scripts are used on a domain controller or stand-alone > # machine to add or delete corresponding unix accounts > ; add user script = /usr/sbin/useradd %u > ; add group script = /usr/sbin/groupadd %g > ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d > /dev/null -s /bin/false %u > ; delete user script = /usr/sbin/userdel %u > ; delete user from group script = /usr/sbin/deluser %u %g > ; delete group script = /usr/sbin/groupdel %g > > > passdb backend = smbpasswd > > #============================ Share Definitions > ============================== > #[homes] > ; comment = Home Directories > ; browseable = no > ; writeable = yes > > # Un-comment the following and create the netlogon directory for Domain > Logons > ; [netlogon] > ; comment = Network Logon Service > ; path = /usr/local/samba/lib/netlogon > ; guest ok = yes > ; writable = no > ; share modes = no > > > # Un-comment the following to provide a specific roving profile share > # the default is to use the user's home directory > ;[Profiles] > ; path = /usr/local/samba/profiles > ; browseable = no > ; guest ok = yes > > [Musica] > comment = Mi Musiquita > path = /home/BerMeJo/Almacen/Musica > browseable = yes > writeable = yes > > [Peliculas] > comment = Mis Peliculas > path = /home/BerMeJo/Almacen/Pelis > browseable = yes > writeable = yes > > [Software] > comment = Software necesario > path = /home/BerMeJo/Almacen/Software > browseable = yes > writeable = yes > > # NOTE: If you have a BSD-style print system there is no need to > # specifically define each individual printer > [printers] > comment = All Printers > path = /usr/spool/samba > browseable = no > # Set public = yes to allow user 'guest account' to print > ; guest ok = no > ; writeable = no > printable = yes > valid users = BerMeJo Lolilla > write list = BerMeJo > > # This one is useful for people to share files > ;[tmp] > ; comment = Temporary file space > ; path = /tmp > ; read only = no > ; public = yes > > # A publicly accessible directory, but read only, except for people in > # the "staff" group > ;[public] > ; comment = Public Stuff > ; path = /home/samba > ; public = yes > ; writable = yes > ; printable = no > ; write list = @staff > > # Other examples. > # > # A private printer, usable only by fred. Spool data will be placed in > fred's > # home directory. Note that fred must have write access to the spool > directory, > # wherever it is. > ;[fredsprn] > ; comment = Fred's Printer > ; valid users = fred > ; path = /homes/fred > ; printer = freds_printer > ; public = no > ; writable = no > ; printable = yes > > # A private directory, usable only by fred. Note that fred requires write > # access to the directory. > ;[fredsdir] > ; comment = Fred's Service > ; path = /usr/somewhere/private > ; valid users = fred > ; public = no > ; writable = yes > ; printable = no > > # a service which has a different directory for each machine that connects > # this allows you to tailor configurations to incoming machines. You could > # also use the %U option to tailor it by user name. > # The %m gets replaced with the machine name that is connecting. > ;[pchome] > ; comment = PC Directories > ; path = /usr/pc/%m > ; public = no > ; writable = yes > > # A publicly accessible directory, read/write to all users. Note that > all files > # created in the directory by users will be owned by the default user, so > # any user with access can delete any other user's files. Obviously this > # directory must be writable by the default user. Another user could of > course > # be specified, in which case all files would be owned by that user instead. > ;[public] > ; path = /usr/somewhere/else/public > ; public = yes > ; only guest = yes > ; writable = yes > ; printable = no > > # The following two entries demonstrate how to share a directory so that two > # users can place files there that will be owned by the specific users. > In this > # setup, the directory should be writable by both users and should have the > # sticky bit set on it to prevent abuse. Obviously this could be extended to > # as many users as required. > ;[myshare] > ; comment = Mary's and Fred's stuff > ; path = /usr/somewhere/shared > ; valid users = mary fred > ; public = no > ; writable = yes > ; printable = no > ; create mask = 0765 > > Please HELP!!!! > Graciasy un abrazo a todos de antemano > Rub?n Lara > > -- > Fedora-es-list mailing list > Fedora-es-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-es-list From bermejator at hotmail.com Wed Mar 7 17:55:38 2007 From: bermejator at hotmail.com (BerMeJo) Date: Wed, 07 Mar 2007 18:55:38 +0100 Subject: Problemas con samba In-Reply-To: <1173254409.9833.4.camel@localhost> References: <200702212123.45424.sekinmor@yahoo.com.ar> <45EDA317.6040106@hotmail.com> <1173254409.9833.4.camel@localhost> Message-ID: <45EEFC9A.6020902@hotmail.com> En las carpetas compartidas tengo para otros y el grupo del usuario permisos de lectura y ejecuci?n, el due?o del recurso tiene todos los permisos. Ambos usuarios tienen cuenta tanto en sistema como en smbpasswd. Con smbclient -L //192.168.1.5 --user=tu_usuario puedo listar los recursos que se comparten sin problema. [BerMeJo at BERMEJO-NEON Almacen]$ testparm Load smb config files from /etc/samba/smb.conf Processing section "[Musica]" Processing section "[Peliculas]" Processing section "[Software]" Processing section "[printers]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] workgroup = CIBERCASA server string = %h Servidor SAMBA interfaces = 192.168.1.0/24 username map = /etc/samba/smbusers log file = /var/log/samba/%m.log max log size = 50 dns proxy = No cups options = raw [Musica] comment = Mi Musiquita path = /home/BerMeJo/Almacen/Musica read only = No [Peliculas] comment = Mis Peliculas path = /home/BerMeJo/Almacen/Pelis read only = No [Software] comment = Software necesario path = /home/BerMeJo/Almacen/Software read only = No [printers] comment = All Printers path = /usr/spool/samba valid users = BerMeJo, Lolilla write list = BerMeJo printable = Yes browseable = No [BerMeJo at BERMEJO-NEON Almacen]$ Es curioso que en la seccion [global] no aparece security = user. Si cambio el tipo de seguridad por ejemplo a shared entonces si aparece security = SHARE No se si tiene algo que ver... Gracias por la respuesta y saludos a todos Rub?n Lara Julio Cesar S?nchez Gonz?lez escribi?: > Si no necesitas autenticacion puedes usar security = share y si la > necesitas puedes tener problemas de permisos en carpetas o no haz creado > al usuario con smbpasswd aunque tambien necesita existir en /etc/passwd > dicho usuario. > > Prueba con smbclient -L //192.168.1.5 --user=tu_usuario o verifica tu > smb.conf con testparm > > Saludos ;) > > Julio Cesar S??nchez Gonz??lez > > > > El mar, 06-03-2007 a las 18:21 +0100, BerMeJo escribi??: > >> Saludos a todos... >> >> Vuelvo a pediros ayuda, puesto que llevo unos dias tratando de >> configurar samba y no lo consigo del todo, ya no se que hacer... >> >> Tengo dos m??quinas, una freebsd y otra con nuestra querida u odiada >> fedora. Ambas m??quinas tienen dos usuarios, tanto en el sistema como en >> el servidor samba mediante smbpasswd. >> >> La conexi??n en direcci??n fedora -> bsd funciona a la perfecci??n, ambos >> usuarios conectan y tengo acceso a los recursos compartidos. >> >> No pasa lo mismo en direccion bsd -> fedora, un usuario me conecta y el >> otro me devuelve siempre el mismo error: >> tree connect failed: NT_STATUS_BAD_NETWORK_NAME >> >> He probado de todo y ya no se que hacer.... >> >> Mi smb.conf: >> # This is the main Samba configuration file. You should read the >> # smb.conf(5) manual page in order to understand the options listed >> # here. Samba has a huge number of configurable options (perhaps too >> # many!) most of which are not shown in this example >> # >> # For a step to step guide on installing, configuring and using samba, >> # read the Samba-HOWTO-Collection. This may be obtained from: >> # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf >> # >> # Many working examples of smb.conf files can be found in the >> # Samba-Guide which is generated daily and can be downloaded from: >> # http://www.samba.org/samba/docs/Samba-Guide.pdf >> # >> # Any line which starts with a ; (semi-colon) or a # (hash) >> # is a comment and is ignored. In this example we will use a # >> # for commentry and a ; for parts of the config file that you >> # may wish to enable >> # >> # NOTE: Whenever you modify this file you should run the command "testparm" >> # to check that you have not made any basic syntactic errors. >> # >> #======================= Global Settings >> ===================================== >> [global] >> >> # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH >> workgroup = CIBERCASA >> >> # server string is the equivalent of the NT Description field >> server string = %h Servidor SAMBA >> >> # Security mode. Defines in which mode Samba will operate. Possible >> # values are share, user, server, domain and ads. Most people will want >> # user level security. See the Samba-HOWTO-Collection for details. >> security = user >> >> # This option is important for security. It allows you to restrict >> # connections to machines which are on your local network. The >> # following example restricts access to two C class networks and >> # the "loopback" interface. For more examples of the syntax see >> # the smb.conf man page >> ; hosts allow = 192.168.1. 192.168.2. 127. >> hosts allow = 192.168.1.120 192.168.1.150 192.168.1.200 192.168.1.100 >> >> >> # If you want to automatically load your printer list rather >> # than setting them up individually then you'll need this >> load printers = yes >> >> # you may wish to override the location of the printcap file >> ; printcap name = /etc/printcap >> >> # on SystemV system setting printcap name to lpstat should allow >> # you to automatically obtain a printer list from the SystemV spool >> # system >> ; printcap name = lpstat >> >> # It should not be necessary to specify the print system type unless >> # it is non-standard. Currently supported print systems include: >> # bsd, cups, sysv, plp, lprng, aix, hpux, qnx >> ; printing = cups >> >> # This option tells cups that the data has already been rasterized >> cups options = raw >> >> # Uncomment this if you want a guest account, you must add this to >> /etc/passwd >> # otherwise the user "nobody" is used >> ; guest account = pcguest >> >> # this tells Samba to use a separate log file for each machine >> # that connects >> log file = /var/log/samba/%m.log >> >> # Put a capping on the size of the log files (in Kb). >> max log size = 50 >> >> # Use password server option only with security = server >> # The argument list may include: >> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] >> # or to auto-locate the domain controller/s >> # password server = * >> ; password server = >> >> # Use the realm option only with security = ads >> # Specifies the Active Directory realm the host is part of >> ; realm = MY_REALM >> >> # Backend to store user information in. New installations should >> # use either tdbsam or ldapsam. smbpasswd is available for backwards >> # compatibility. tdbsam requires no further configuration. >> ; passdb backend = tdbsam >> >> # Using the following line enables you to customise your configuration >> # on a per machine basis. The %m gets replaced with the netbios name >> # of the machine that is connecting. >> # Note: Consider carefully the location in the configuration file of >> # this line. The included file is read at that point. >> ; include = /usr/local/samba/lib/smb.conf.%m >> >> # Configure Samba to use multiple interfaces >> # If you have multiple network interfaces then you must list them >> # here. See the man page for details. >> ; interfaces = 192.168.12.2/24 192.168.13.2/24 >> interfaces = 192.168.1.0/24 >> >> # Browser Control Options: >> # set local master to no if you don't want Samba to become a master >> # browser on your network. Otherwise the normal election rules apply >> ; local master = no >> >> # OS Level determines the precedence of this server in master browser >> # elections. The default value should be reasonable >> ; os level = 33 >> >> # Domain Master specifies Samba to be the Domain Master Browser. This >> # allows Samba to collate browse lists between subnets. Don't use this >> # if you already have a Windows NT domain controller doing this job >> ; domain master = yes >> >> # Preferred Master causes Samba to force a local browser election on startup >> # and gives it a slightly higher chance of winning the election >> ; preferred master = yes >> >> # Enable this if you want Samba to be a domain logon server for >> # Windows95 workstations. >> ; domain logons = yes >> >> # if you enable domain logons then you may want a per-machine or >> # per user logon script >> # run a specific logon batch file per workstation (machine) >> ; logon script = %m.bat >> # run a specific logon batch file per username >> ; logon script = %U.bat >> >> # Where to store roving profiles (only for Win95 and WinNT) >> # %L substitutes for this servers netbios name, %U is username >> # You must uncomment the [Profiles] share below >> ; logon path = \\%L\Profiles\%U >> >> # Windows Internet Name Serving Support Section: >> # WINS Support - Tells the NMBD component of Samba to enable it's WINS >> Server >> ; wins support = yes >> >> # WINS Server - Tells the NMBD components of Samba to be a WINS Client >> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both >> ; wins server = w.x.y.z >> >> # WINS Proxy - Tells Samba to answer name resolution queries on >> # behalf of a non WINS capable client, for this to work there must be >> # at least one WINS Server on the network. The default is NO. >> ; wins proxy = yes >> >> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names >> # via DNS nslookups. The default is NO. >> dns proxy = no >> username map = /etc/samba/smbusers >> ; encrypt passwords = yes >> ; guest ok = no >> ; guest account = nobody >> >> # These scripts are used on a domain controller or stand-alone >> # machine to add or delete corresponding unix accounts >> ; add user script = /usr/sbin/useradd %u >> ; add group script = /usr/sbin/groupadd %g >> ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d >> /dev/null -s /bin/false %u >> ; delete user script = /usr/sbin/userdel %u >> ; delete user from group script = /usr/sbin/deluser %u %g >> ; delete group script = /usr/sbin/groupdel %g >> >> >> passdb backend = smbpasswd >> >> #============================ Share Definitions >> ============================== >> #[homes] >> ; comment = Home Directories >> ; browseable = no >> ; writeable = yes >> >> # Un-comment the following and create the netlogon directory for Domain >> Logons >> ; [netlogon] >> ; comment = Network Logon Service >> ; path = /usr/local/samba/lib/netlogon >> ; guest ok = yes >> ; writable = no >> ; share modes = no >> >> >> # Un-comment the following to provide a specific roving profile share >> # the default is to use the user's home directory >> ;[Profiles] >> ; path = /usr/local/samba/profiles >> ; browseable = no >> ; guest ok = yes >> >> [Musica] >> comment = Mi Musiquita >> path = /home/BerMeJo/Almacen/Musica >> browseable = yes >> writeable = yes >> >> [Peliculas] >> comment = Mis Peliculas >> path = /home/BerMeJo/Almacen/Pelis >> browseable = yes >> writeable = yes >> >> [Software] >> comment = Software necesario >> path = /home/BerMeJo/Almacen/Software >> browseable = yes >> writeable = yes >> >> # NOTE: If you have a BSD-style print system there is no need to >> # specifically define each individual printer >> [printers] >> comment = All Printers >> path = /usr/spool/samba >> browseable = no >> # Set public = yes to allow user 'guest account' to print >> ; guest ok = no >> ; writeable = no >> printable = yes >> valid users = BerMeJo Lolilla >> write list = BerMeJo >> >> # This one is useful for people to share files >> ;[tmp] >> ; comment = Temporary file space >> ; path = /tmp >> ; read only = no >> ; public = yes >> >> # A publicly accessible directory, but read only, except for people in >> # the "staff" group >> ;[public] >> ; comment = Public Stuff >> ; path = /home/samba >> ; public = yes >> ; writable = yes >> ; printable = no >> ; write list = @staff >> >> # Other examples. >> # >> # A private printer, usable only by fred. Spool data will be placed in >> fred's >> # home directory. Note that fred must have write access to the spool >> directory, >> # wherever it is. >> ;[fredsprn] >> ; comment = Fred's Printer >> ; valid users = fred >> ; path = /homes/fred >> ; printer = freds_printer >> ; public = no >> ; writable = no >> ; printable = yes >> >> # A private directory, usable only by fred. Note that fred requires write >> # access to the directory. >> ;[fredsdir] >> ; comment = Fred's Service >> ; path = /usr/somewhere/private >> ; valid users = fred >> ; public = no >> ; writable = yes >> ; printable = no >> >> # a service which has a different directory for each machine that connects >> # this allows you to tailor configurations to incoming machines. You could >> # also use the %U option to tailor it by user name. >> # The %m gets replaced with the machine name that is connecting. >> ;[pchome] >> ; comment = PC Directories >> ; path = /usr/pc/%m >> ; public = no >> ; writable = yes >> >> # A publicly accessible directory, read/write to all users. Note that >> all files >> # created in the directory by users will be owned by the default user, so >> # any user with access can delete any other user's files. Obviously this >> # directory must be writable by the default user. Another user could of >> course >> # be specified, in which case all files would be owned by that user instead. >> ;[public] >> ; path = /usr/somewhere/else/public >> ; public = yes >> ; only guest = yes >> ; writable = yes >> ; printable = no >> >> # The following two entries demonstrate how to share a directory so that two >> # users can place files there that will be owned by the specific users. >> In this >> # setup, the directory should be writable by both users and should have the >> # sticky bit set on it to prevent abuse. Obviously this could be extended to >> # as many users as required. >> ;[myshare] >> ; comment = Mary's and Fred's stuff >> ; path = /usr/somewhere/shared >> ; valid users = mary fred >> ; public = no >> ; writable = yes >> ; printable = no >> ; create mask = 0765 >> >> Please HELP!!!! >> Graciasy un abrazo a todos de antemano >> Rub??n Lara >> >> -- >> Fedora-es-list mailing list >> Fedora-es-list at redhat.com >> To unsubscribe: >> https://www.redhat.com/mailman/listinfo/fedora-es-list >> > > -- > Fedora-es-list mailing list > Fedora-es-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-es-list > > From bermejator at hotmail.com Thu Mar 8 04:41:19 2007 From: bermejator at hotmail.com (BerMeJo) Date: Thu, 08 Mar 2007 05:41:19 +0100 Subject: Problemas con samba In-Reply-To: <1173254409.9833.4.camel@localhost> References: <200702212123.45424.sekinmor@yahoo.com.ar> <45EDA317.6040106@hotmail.com> <1173254409.9833.4.camel@localhost> Message-ID: <45EF93EF.3090705@hotmail.com> Saludos de nuevo, aqui sigo probando y probando.... He probado tambi?n habilitando usuarios anonimos, y nada solo me deja con el usuario que creo al instalar el sistema, los dem?s me mandan al garete... Otro dato es que tengo selinux desactivado... En /var/log/samba/log puedo ver: [2007/03/08 04:50:50, 0] smbd/service.c:make_connection_snum(920) '/home/BerMeJo/Almacen/Musica' does not exist or permission denied when connecting to [Musica] Error was Permiso denegado pero tengo permisos 755 en todos los recursos que comparto.... que desesperaci?n Rub?n Lara Julio Cesar S?nchez Gonz?lez escribi?: > Si no necesitas autenticacion puedes usar security = share y si la > necesitas puedes tener problemas de permisos en carpetas o no haz creado > al usuario con smbpasswd aunque tambien necesita existir en /etc/passwd > dicho usuario. > > Prueba con smbclient -L //192.168.1.5 --user=tu_usuario o verifica tu > smb.conf con testparm > > Saludos ;) > > Julio Cesar S??nchez Gonz??lez > > > > El mar, 06-03-2007 a las 18:21 +0100, BerMeJo escribi??: > >> Saludos a todos... >> >> Vuelvo a pediros ayuda, puesto que llevo unos dias tratando de >> configurar samba y no lo consigo del todo, ya no se que hacer... >> >> Tengo dos m??quinas, una freebsd y otra con nuestra querida u odiada >> fedora. Ambas m??quinas tienen dos usuarios, tanto en el sistema como en >> el servidor samba mediante smbpasswd. >> >> La conexi??n en direcci??n fedora -> bsd funciona a la perfecci??n, ambos >> usuarios conectan y tengo acceso a los recursos compartidos. >> >> No pasa lo mismo en direccion bsd -> fedora, un usuario me conecta y el >> otro me devuelve siempre el mismo error: >> tree connect failed: NT_STATUS_BAD_NETWORK_NAME >> >> He probado de todo y ya no se que hacer.... >> >> Mi smb.conf: >> # This is the main Samba configuration file. You should read the >> # smb.conf(5) manual page in order to understand the options listed >> # here. Samba has a huge number of configurable options (perhaps too >> # many!) most of which are not shown in this example >> # >> # For a step to step guide on installing, configuring and using samba, >> # read the Samba-HOWTO-Collection. This may be obtained from: >> # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf >> # >> # Many working examples of smb.conf files can be found in the >> # Samba-Guide which is generated daily and can be downloaded from: >> # http://www.samba.org/samba/docs/Samba-Guide.pdf >> # >> # Any line which starts with a ; (semi-colon) or a # (hash) >> # is a comment and is ignored. In this example we will use a # >> # for commentry and a ; for parts of the config file that you >> # may wish to enable >> # >> # NOTE: Whenever you modify this file you should run the command "testparm" >> # to check that you have not made any basic syntactic errors. >> # >> #======================= Global Settings >> ===================================== >> [global] >> >> # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH >> workgroup = CIBERCASA >> >> # server string is the equivalent of the NT Description field >> server string = %h Servidor SAMBA >> >> # Security mode. Defines in which mode Samba will operate. Possible >> # values are share, user, server, domain and ads. Most people will want >> # user level security. See the Samba-HOWTO-Collection for details. >> security = user >> >> # This option is important for security. It allows you to restrict >> # connections to machines which are on your local network. The >> # following example restricts access to two C class networks and >> # the "loopback" interface. For more examples of the syntax see >> # the smb.conf man page >> ; hosts allow = 192.168.1. 192.168.2. 127. >> hosts allow = 192.168.1.120 192.168.1.150 192.168.1.200 192.168.1.100 >> >> >> # If you want to automatically load your printer list rather >> # than setting them up individually then you'll need this >> load printers = yes >> >> # you may wish to override the location of the printcap file >> ; printcap name = /etc/printcap >> >> # on SystemV system setting printcap name to lpstat should allow >> # you to automatically obtain a printer list from the SystemV spool >> # system >> ; printcap name = lpstat >> >> # It should not be necessary to specify the print system type unless >> # it is non-standard. Currently supported print systems include: >> # bsd, cups, sysv, plp, lprng, aix, hpux, qnx >> ; printing = cups >> >> # This option tells cups that the data has already been rasterized >> cups options = raw >> >> # Uncomment this if you want a guest account, you must add this to >> /etc/passwd >> # otherwise the user "nobody" is used >> ; guest account = pcguest >> >> # this tells Samba to use a separate log file for each machine >> # that connects >> log file = /var/log/samba/%m.log >> >> # Put a capping on the size of the log files (in Kb). >> max log size = 50 >> >> # Use password server option only with security = server >> # The argument list may include: >> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] >> # or to auto-locate the domain controller/s >> # password server = * >> ; password server = >> >> # Use the realm option only with security = ads >> # Specifies the Active Directory realm the host is part of >> ; realm = MY_REALM >> >> # Backend to store user information in. New installations should >> # use either tdbsam or ldapsam. smbpasswd is available for backwards >> # compatibility. tdbsam requires no further configuration. >> ; passdb backend = tdbsam >> >> # Using the following line enables you to customise your configuration >> # on a per machine basis. The %m gets replaced with the netbios name >> # of the machine that is connecting. >> # Note: Consider carefully the location in the configuration file of >> # this line. The included file is read at that point. >> ; include = /usr/local/samba/lib/smb.conf.%m >> >> # Configure Samba to use multiple interfaces >> # If you have multiple network interfaces then you must list them >> # here. See the man page for details. >> ; interfaces = 192.168.12.2/24 192.168.13.2/24 >> interfaces = 192.168.1.0/24 >> >> # Browser Control Options: >> # set local master to no if you don't want Samba to become a master >> # browser on your network. Otherwise the normal election rules apply >> ; local master = no >> >> # OS Level determines the precedence of this server in master browser >> # elections. The default value should be reasonable >> ; os level = 33 >> >> # Domain Master specifies Samba to be the Domain Master Browser. This >> # allows Samba to collate browse lists between subnets. Don't use this >> # if you already have a Windows NT domain controller doing this job >> ; domain master = yes >> >> # Preferred Master causes Samba to force a local browser election on startup >> # and gives it a slightly higher chance of winning the election >> ; preferred master = yes >> >> # Enable this if you want Samba to be a domain logon server for >> # Windows95 workstations. >> ; domain logons = yes >> >> # if you enable domain logons then you may want a per-machine or >> # per user logon script >> # run a specific logon batch file per workstation (machine) >> ; logon script = %m.bat >> # run a specific logon batch file per username >> ; logon script = %U.bat >> >> # Where to store roving profiles (only for Win95 and WinNT) >> # %L substitutes for this servers netbios name, %U is username >> # You must uncomment the [Profiles] share below >> ; logon path = \\%L\Profiles\%U >> >> # Windows Internet Name Serving Support Section: >> # WINS Support - Tells the NMBD component of Samba to enable it's WINS >> Server >> ; wins support = yes >> >> # WINS Server - Tells the NMBD components of Samba to be a WINS Client >> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both >> ; wins server = w.x.y.z >> >> # WINS Proxy - Tells Samba to answer name resolution queries on >> # behalf of a non WINS capable client, for this to work there must be >> # at least one WINS Server on the network. The default is NO. >> ; wins proxy = yes >> >> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names >> # via DNS nslookups. The default is NO. >> dns proxy = no >> username map = /etc/samba/smbusers >> ; encrypt passwords = yes >> ; guest ok = no >> ; guest account = nobody >> >> # These scripts are used on a domain controller or stand-alone >> # machine to add or delete corresponding unix accounts >> ; add user script = /usr/sbin/useradd %u >> ; add group script = /usr/sbin/groupadd %g >> ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d >> /dev/null -s /bin/false %u >> ; delete user script = /usr/sbin/userdel %u >> ; delete user from group script = /usr/sbin/deluser %u %g >> ; delete group script = /usr/sbin/groupdel %g >> >> >> passdb backend = smbpasswd >> >> #============================ Share Definitions >> ============================== >> #[homes] >> ; comment = Home Directories >> ; browseable = no >> ; writeable = yes >> >> # Un-comment the following and create the netlogon directory for Domain >> Logons >> ; [netlogon] >> ; comment = Network Logon Service >> ; path = /usr/local/samba/lib/netlogon >> ; guest ok = yes >> ; writable = no >> ; share modes = no >> >> >> # Un-comment the following to provide a specific roving profile share >> # the default is to use the user's home directory >> ;[Profiles] >> ; path = /usr/local/samba/profiles >> ; browseable = no >> ; guest ok = yes >> >> [Musica] >> comment = Mi Musiquita >> path = /home/BerMeJo/Almacen/Musica >> browseable = yes >> writeable = yes >> >> [Peliculas] >> comment = Mis Peliculas >> path = /home/BerMeJo/Almacen/Pelis >> browseable = yes >> writeable = yes >> >> [Software] >> comment = Software necesario >> path = /home/BerMeJo/Almacen/Software >> browseable = yes >> writeable = yes >> >> # NOTE: If you have a BSD-style print system there is no need to >> # specifically define each individual printer >> [printers] >> comment = All Printers >> path = /usr/spool/samba >> browseable = no >> # Set public = yes to allow user 'guest account' to print >> ; guest ok = no >> ; writeable = no >> printable = yes >> valid users = BerMeJo Lolilla >> write list = BerMeJo >> >> # This one is useful for people to share files >> ;[tmp] >> ; comment = Temporary file space >> ; path = /tmp >> ; read only = no >> ; public = yes >> >> # A publicly accessible directory, but read only, except for people in >> # the "staff" group >> ;[public] >> ; comment = Public Stuff >> ; path = /home/samba >> ; public = yes >> ; writable = yes >> ; printable = no >> ; write list = @staff >> >> # Other examples. >> # >> # A private printer, usable only by fred. Spool data will be placed in >> fred's >> # home directory. Note that fred must have write access to the spool >> directory, >> # wherever it is. >> ;[fredsprn] >> ; comment = Fred's Printer >> ; valid users = fred >> ; path = /homes/fred >> ; printer = freds_printer >> ; public = no >> ; writable = no >> ; printable = yes >> >> # A private directory, usable only by fred. Note that fred requires write >> # access to the directory. >> ;[fredsdir] >> ; comment = Fred's Service >> ; path = /usr/somewhere/private >> ; valid users = fred >> ; public = no >> ; writable = yes >> ; printable = no >> >> # a service which has a different directory for each machine that connects >> # this allows you to tailor configurations to incoming machines. You could >> # also use the %U option to tailor it by user name. >> # The %m gets replaced with the machine name that is connecting. >> ;[pchome] >> ; comment = PC Directories >> ; path = /usr/pc/%m >> ; public = no >> ; writable = yes >> >> # A publicly accessible directory, read/write to all users. Note that >> all files >> # created in the directory by users will be owned by the default user, so >> # any user with access can delete any other user's files. Obviously this >> # directory must be writable by the default user. Another user could of >> course >> # be specified, in which case all files would be owned by that user instead. >> ;[public] >> ; path = /usr/somewhere/else/public >> ; public = yes >> ; only guest = yes >> ; writable = yes >> ; printable = no >> >> # The following two entries demonstrate how to share a directory so that two >> # users can place files there that will be owned by the specific users. >> In this >> # setup, the directory should be writable by both users and should have the >> # sticky bit set on it to prevent abuse. Obviously this could be extended to >> # as many users as required. >> ;[myshare] >> ; comment = Mary's and Fred's stuff >> ; path = /usr/somewhere/shared >> ; valid users = mary fred >> ; public = no >> ; writable = yes >> ; printable = no >> ; create mask = 0765 >> >> Please HELP!!!! >> Graciasy un abrazo a todos de antemano >> Rub??n Lara >> >> -- >> Fedora-es-list mailing list >> Fedora-es-list at redhat.com >> To unsubscribe: >> https://www.redhat.com/mailman/listinfo/fedora-es-list >> > > -- > Fedora-es-list mailing list > Fedora-es-list at redhat.com > To unsubscribe: > https://www.redhat.com/mailman/listinfo/fedora-es-list > > From pfabrega at arrakis.es Thu Mar 8 17:35:15 2007 From: pfabrega at arrakis.es (Pedro Pablo) Date: Thu, 8 Mar 2007 18:35:15 +0100 Subject: Problemas con samba In-Reply-To: <45EF93EF.3090705@hotmail.com> References: <200702212123.45424.sekinmor@yahoo.com.ar> <1173254409.9833.4.camel@localhost> <45EF93EF.3090705@hotmail.com> Message-ID: <200703081835.17182.pfabrega@arrakis.es> El Jueves, 8 de Marzo de 2007 05:41, BerMeJo escribi?: > Saludos de nuevo, aqui sigo probando y probando.... > He probado tambi??n habilitando usuarios anonimos, y nada solo me deja > con el usuario que creo al instalar el sistema, los dem??s me mandan al > garete... > > Otro dato es que tengo selinux desactivado... > > En /var/log/samba/log puedo ver: > > [2007/03/08 04:50:50, 0] smbd/service.c:make_connection_snum(920) > '/home/BerMeJo/Almacen/Musica' does not exist or permission denied when > connecting to [Musica] Error was Permiso denegado > > pero tengo permisos 755 en todos los recursos que comparto.... > Hola: Pero los directorios superiores tambi?n tienen que tener permiso de acceso ya que el proceso de samba es propiedad del usuario que inicia la conexi?n y tienen que acceder hasta llegar al compartido. Saludetes -- 18:26:10 up 8 days, 14:41, 7 users, load average: 0.41, 0.47, 0.38 -------- From wilmer at fedoraproject.org Fri Mar 9 03:57:11 2007 From: wilmer at fedoraproject.org (Wilmer Jaramillo M.) Date: Thu, 8 Mar 2007 23:57:11 -0400 Subject: Problemas con samba In-Reply-To: <45EDA317.6040106@hotmail.com> References: <200702212123.45424.sekinmor@yahoo.com.ar> <45EDA317.6040106@hotmail.com> Message-ID: <2b26c4260703081957m1148a938odbaad27820fe4418@mail.gmail.com> On 3/6/07, BerMeJo wrote: > Saludos a todos... > > Vuelvo a pediros ayuda, puesto que llevo unos dias tratando de > configurar samba y no lo consigo del todo, ya no se que hacer... > > Tengo dos m?quinas, una freebsd y otra con nuestra querida u odiada > fedora. Ambas m?quinas tienen dos usuarios, tanto en el sistema como en > el servidor samba mediante smbpasswd. Antes que nada no entiendo la raz?n de usar Samba ente sistemas tipo Unix, no hay ni que dudarlo en utilizar NFS en su lugar, si tu problema es con la autenticaci?n, es m?s nutritivo usar NFS con Kerberos que, en comparaci?n con Samba es mucho m?s r?pido y seguro. -- Wilmer Jaramillo M. GPG Key Fingerprint = 0666 D0D3 24CE 8935 9C24 BBF1 87DD BEA2 A4B2 1E8A From bermejator at hotmail.com Fri Mar 9 14:01:22 2007 From: bermejator at hotmail.com (BerMeJo) Date: Fri, 09 Mar 2007 15:01:22 +0100 Subject: Problemas con samba In-Reply-To: <200703081835.17182.pfabrega@arrakis.es> References: <200702212123.45424.sekinmor@yahoo.com.ar> <1173254409.9833.4.camel@localhost> <45EF93EF.3090705@hotmail.com> <200703081835.17182.pfabrega@arrakis.es> Message-ID: <45F168B2.3080807@hotmail.com> Pedro Pablo escribi?: > El Jueves, 8 de Marzo de 2007 05:41, BerMeJo escribi??: > >> Saludos de nuevo, aqui sigo probando y probando.... >> He probado tambi????n habilitando usuarios anonimos, y nada solo me deja >> con el usuario que creo al instalar el sistema, los dem????s me mandan al >> garete... >> >> Otro dato es que tengo selinux desactivado... >> >> En /var/log/samba/log puedo ver: >> >> [2007/03/08 04:50:50, 0] smbd/service.c:make_connection_snum(920) >> '/home/BerMeJo/Almacen/Musica' does not exist or permission denied when >> connecting to [Musica] Error was Permiso denegado >> >> pero tengo permisos 755 en todos los recursos que comparto.... >> >> > > Hola: > > Pero los directorios superiores tambi??n tienen que tener permiso de acceso ya > que el proceso de samba es propiedad del usuario que inicia la conexi??n y > tienen que acceder hasta llegar al compartido. > > > Saludetes > Bueno pues parece que /home/BerMeJo tenia permisos 700, asi que ah? estaba el error, no me hab?a dado cuenta, asi que gracias a vosotros de nuevo es? solucionado. La raz?n por la que uso samba y no nfs es que si existe una m?quina windows por medio. Saludos a todos y muchhisisisisisimas gracias por todo Rub?n Lara