rpms/alliance/FC-6 alliance-examples.patch, NONE, 1.1 alliance-log3.patch, NONE, 1.1 alliance-perms.patch, NONE, 1.1 alliance-run.patch, NONE, 1.1 alliance-tutorials.patch, NONE, 1.1 alliance.fedora, NONE, 1.1 alliance.spec, NONE, 1.1 dreal.desktop, NONE, 1.1 dreal.png, NONE, 1.1 graal.desktop, NONE, 1.1 graal.png, NONE, 1.1 xfsm.desktop, NONE, 1.1 xfsm.png, NONE, 1.1 xpat.desktop, NONE, 1.1 xpat.png, NONE, 1.1 xsch.desktop, NONE, 1.1 xsch.png, NONE, 1.1 xvpn.desktop, NONE, 1.1 xvpn.png, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2
Chitlesh GOORAH (chitlesh)
fedora-extras-commits at redhat.com
Mon Aug 13 20:55:12 UTC 2007
Author: chitlesh
Update of /cvs/extras/rpms/alliance/FC-6
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv3404/FC-6
Modified Files:
.cvsignore sources
Added Files:
alliance-examples.patch alliance-log3.patch
alliance-perms.patch alliance-run.patch
alliance-tutorials.patch alliance.fedora alliance.spec
dreal.desktop dreal.png graal.desktop graal.png xfsm.desktop
xfsm.png xpat.desktop xpat.png xsch.desktop xsch.png
xvpn.desktop xvpn.png
Log Message:
alliance-examples.patch:
--- NEW FILE alliance-examples.patch ---
diff -Naur documentation/alliance-examples/addaccu16/Makefile alliance-examples/addaccu16/Makefile
--- documentation/alliance-examples/addaccu16/Makefile 2004-05-24 00:15:16.000000000 +0200
+++ alliance-examples/addaccu16/Makefile 2007-07-19 13:13:51.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,8 +41,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 2
diff -Naur documentation/alliance-examples/addaccu16/README alliance-examples/addaccu16/README
--- documentation/alliance-examples/addaccu16/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/addaccu16/README 2007-07-19 13:13:51.000000000 +0200
@@ -10,11 +10,13 @@
the associated stimuli file, and also a configuration file for IO
placement (used during the Place and Route step).
-The Makefile set environement variables properly and run Alliance tools,
+The Makefile set environment variables properly and run Alliance tools,
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
+
+copy the folder "addaccu16" to any writable folder of your choice and type:
+$ make
The main targets of the makefile are listed below (following the design flow).
diff -Naur documentation/alliance-examples/adder4/adder4.ioc alliance-examples/adder4/adder4.ioc
--- documentation/alliance-examples/adder4/adder4.ioc 2004-05-23 19:27:03.000000000 +0200
+++ alliance-examples/adder4/adder4.ioc 2007-07-19 13:13:51.000000000 +0200
@@ -1,4 +1,4 @@
-# Copyright (c) 1997 by Cadence. All rights reserved.
+#
###################################################################
# In each of TOP()/BOTTOM()/LEFT()/RIGHT() section, there are #
# placed IOs. In the IGNORE() section, the IOs are ignored #
diff -Naur documentation/alliance-examples/adder4/Makefile alliance-examples/adder4/Makefile
--- documentation/alliance-examples/adder4/Makefile 2004-05-24 00:15:20.000000000 +0200
+++ alliance-examples/adder4/Makefile 2007-07-19 13:13:51.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,8 +41,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 2
diff -Naur documentation/alliance-examples/adder4/README alliance-examples/adder4/README
--- documentation/alliance-examples/adder4/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/adder4/README 2007-07-19 13:13:51.000000000 +0200
@@ -14,7 +14,9 @@
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
+
+copy the folder "adder4" to any writable folder of your choice and type:
+$ make
The main targets of the makefile are listed below (following the design flow).
diff -Naur documentation/alliance-examples/amd2901/amd2901_core.ioc alliance-examples/amd2901/amd2901_core.ioc
--- documentation/alliance-examples/amd2901/amd2901_core.ioc 2004-05-23 20:55:16.000000000 +0200
+++ alliance-examples/amd2901/amd2901_core.ioc 2007-07-19 13:13:52.000000000 +0200
@@ -1,4 +1,4 @@
-# Copyright (c) 1997 by Cadence. All rights reserved.
+#
###################################################################
# In each of TOP()/BOTTOM()/LEFT()/RIGHT() section, there are #
# placed IOs. In the IGNORE() section, the IOs are ignored #
diff -Naur documentation/alliance-examples/amd2901/Makefile alliance-examples/amd2901/Makefile
--- documentation/alliance-examples/amd2901/Makefile 2004-05-24 00:15:22.000000000 +0200
+++ alliance-examples/amd2901/Makefile 2007-07-19 13:13:51.000000000 +0200
@@ -11,7 +11,9 @@
STANDART_PATH = PATH=$(STANDART_BIN); export PATH
# Standart Alliance binary access paths.
ALLIANCE_BIN = $(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
# --------------------------------------------------------------------
# Standarts binaries.
@@ -41,8 +43,8 @@
CATA_LIB2 = $(ALLIANCE_TOP)/cells/padlib
CATA_LIB = .:$(CATA_LIB0):$(CATA_LIB1):$(CATA_LIB2)
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
- RDS_TECHNO = ../etc/techno-symb.rds
- REAL_RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
GRAAL_TECHNO = $(ALLIANCE_TOP)/etc/cmos.graal
diff -Naur documentation/alliance-examples/amd2901-vasy/amd2901.ioc alliance-examples/amd2901-vasy/amd2901.ioc
--- documentation/alliance-examples/amd2901-vasy/amd2901.ioc 2004-05-23 21:00:16.000000000 +0200
+++ alliance-examples/amd2901-vasy/amd2901.ioc 2007-07-19 13:13:52.000000000 +0200
@@ -1,4 +1,4 @@
-# Copyright (c) 1997 by Cadence. All rights reserved.
+#
###################################################################
# In each of TOP()/BOTTOM()/LEFT()/RIGHT() section, there are #
# placed IOs. In the IGNORE() section, the IOs are ignored #
diff -Naur documentation/alliance-examples/amd2901-vasy/Makefile alliance-examples/amd2901-vasy/Makefile
--- documentation/alliance-examples/amd2901-vasy/Makefile 2004-05-24 00:15:23.000000000 +0200
+++ alliance-examples/amd2901-vasy/Makefile 2007-07-19 13:13:52.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN = $(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -40,8 +42,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 4
diff -Naur documentation/alliance-examples/digi/Makefile alliance-examples/digi/Makefile
--- documentation/alliance-examples/digi/Makefile 2004-09-09 22:03:49.000000000 +0200
+++ alliance-examples/digi/Makefile 2007-07-19 13:13:52.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
SYF = $(ALLIANCE_BIN)/syf
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -40,14 +42,14 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
METAL_LEVEL = 2
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
# /*------------------------------------------------------------\
# | |
-# | Environement |
+# | Environment |
# | |
# \------------------------------------------------------------*/
diff -Naur documentation/alliance-examples/divcas4/divcas4.ioc alliance-examples/divcas4/divcas4.ioc
--- documentation/alliance-examples/divcas4/divcas4.ioc 2004-05-23 19:52:10.000000000 +0200
+++ alliance-examples/divcas4/divcas4.ioc 2007-07-19 13:13:52.000000000 +0200
@@ -1,4 +1,4 @@
-# Copyright (c) 1997 by Cadence. All rights reserved.
+#
###################################################################
# In each of TOP()/BOTTOM()/LEFT()/RIGHT() section, there are #
# placed IOs. In the IGNORE() section, the IOs are ignored #
diff -Naur documentation/alliance-examples/divcas4/Makefile alliance-examples/divcas4/Makefile
--- documentation/alliance-examples/divcas4/Makefile 2004-05-23 21:11:26.000000000 +0200
+++ alliance-examples/divcas4/Makefile 2007-07-19 13:13:52.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN = $(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,8 +41,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 2
diff -Naur documentation/alliance-examples/divcas4/README alliance-examples/divcas4/README
--- documentation/alliance-examples/divcas4/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/divcas4/README 2007-07-19 13:13:52.000000000 +0200
@@ -14,5 +14,6 @@
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
-
+
+copy the folder "divcas4" to any writable folder of your choice and type:
+$ make
diff -Naur documentation/alliance-examples/hadamard/Makefile alliance-examples/hadamard/Makefile
--- documentation/alliance-examples/hadamard/Makefile 2004-05-24 00:15:25.000000000 +0200
+++ alliance-examples/hadamard/Makefile 2007-07-19 16:21:10.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN = $(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,14 +41,14 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 6
# /*------------------------------------------------------------\
# | |
-# | Environement |
+# | Environment |
# | |
# \------------------------------------------------------------*/
@@ -163,11 +165,11 @@
res_vasy_1.pat : hadamard.vst calcul.vbe ram.vbe rom.vbe \
compteur.vbe sequenceur.vbe hadamard_model.vbe
- $(ENV_ASIMUT_VASY); $(ASIMUT) hadamard hadamard_1 res_vasy_1
+ $(ENV_ASIMUT_VASY); $(ASIMUT) hadamard hadamard_1 res_vasy_1
res_synth_1.pat : hadamard.vst calcul.vst ram.vst rom.vst \
compteur.vst sequenceur.vst hadamard_model.vst
- $(ENV_ASIMUT_SYNTH); $(ASIMUT) -zd hadamard hadamard_1 res_synth_1
+ $(ENV_ASIMUT_SYNTH); $(ASIMUT) -zd hadamard hadamard_1 res_synth_1
# /*------------------------------------------------------------\
@@ -299,7 +301,7 @@
# | |
# \------------------------------------------------------------*/
-lvx.done : hadamard.vst hadamard_e.al
+lvx.done : hadamard.vst hadamard_e.al
$(ENV_LVX); $(LVX) vst al hadamard hadamard_e -f
$(TOUCH) lvx.done
@@ -355,4 +357,4 @@
$(RM) -f *.vst *.vbe *.boom *.done *.xsc *.al *.ap *.gpl *.gds \
*.log *.drc *.cif *.fin *.dat *.out hadamard_e.spi res_synth_1.pat \
res_vasy_1.pat
-
+
diff -Naur documentation/alliance-examples/mipsR3000/sce/Makefile alliance-examples/mipsR3000/sce/Makefile
--- documentation/alliance-examples/mipsR3000/sce/Makefile 2004-07-30 02:40:09.000000000 +0200
+++ alliance-examples/mipsR3000/sce/Makefile 2007-07-19 13:13:58.000000000 +0200
@@ -5,7 +5,9 @@
STANDART_PATH = PATH=$(STANDART_BIN); export PATH
# Standart Alliance binary access paths.
ALLIANCE_BIN = $(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
# FitPath Alliance binary access paths.
# DEVEL_BIN = /users/soft5/newlabo/alliance-4.5.0/archi/Solaris/bin
diff -Naur documentation/alliance-examples/mipsR3000/sce/mips_core.ioc alliance-examples/mipsR3000/sce/mips_core.ioc
--- documentation/alliance-examples/mipsR3000/sce/mips_core.ioc 2004-05-24 00:23:35.000000000 +0200
+++ alliance-examples/mipsR3000/sce/mips_core.ioc 2007-07-19 13:13:58.000000000 +0200
@@ -1,4 +1,4 @@
-# Copyright (c) 1997 by Cadence. All rights reserved.
+#
###################################################################
# In each of TOP()/BOTTOM()/LEFT()/RIGHT() section, there are #
# placed IOs. In the IGNORE() section, the IOs are ignored #
diff -Naur documentation/alliance-examples/multi16b-reg/Makefile alliance-examples/multi16b-reg/Makefile
--- documentation/alliance-examples/multi16b-reg/Makefile 2004-05-24 00:15:29.000000000 +0200
+++ alliance-examples/multi16b-reg/Makefile 2007-07-19 13:13:59.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN = $(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,14 +41,14 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 6
# /*------------------------------------------------------------\
# | |
-# | Environement |
+# | Environment |
# | |
# \------------------------------------------------------------*/
diff -Naur documentation/alliance-examples/multi4b/Makefile alliance-examples/multi4b/Makefile
--- documentation/alliance-examples/multi4b/Makefile 2004-05-24 00:15:29.000000000 +0200
+++ alliance-examples/multi4b/Makefile 2007-07-19 13:14:00.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,14 +41,14 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 2
# /*------------------------------------------------------------\
# | |
-# | Environement |
+# | Environment |
# | |
# \------------------------------------------------------------*/
diff -Naur documentation/alliance-examples/multi4b/README alliance-examples/multi4b/README
--- documentation/alliance-examples/multi4b/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/multi4b/README 2007-07-19 13:14:00.000000000 +0200
@@ -14,7 +14,9 @@
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
+
+copy the folder "multi4b" to any writable folder of your choice and type:
+$ make
The main targets of the makefile are listed below (following the design flow).
diff -Naur documentation/alliance-examples/multi8/Makefile alliance-examples/multi8/Makefile
--- documentation/alliance-examples/multi8/Makefile 2004-05-24 00:15:30.000000000 +0200
+++ alliance-examples/multi8/Makefile 2007-07-19 13:14:00.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,8 +41,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 2
diff -Naur documentation/alliance-examples/multi8/README alliance-examples/multi8/README
--- documentation/alliance-examples/multi8/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/multi8/README 2007-07-19 13:14:00.000000000 +0200
@@ -15,4 +15,6 @@
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
+
+copy the folder "multi8" to any writable folder of your choice and type:
+$ make
diff -Naur documentation/alliance-examples/multi8b/Makefile alliance-examples/multi8b/Makefile
--- documentation/alliance-examples/multi8b/Makefile 2004-05-24 00:15:30.000000000 +0200
+++ alliance-examples/multi8b/Makefile 2007-07-19 13:14:00.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,8 +41,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 4
diff -Naur documentation/alliance-examples/multi8b/README alliance-examples/multi8b/README
--- documentation/alliance-examples/multi8b/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/multi8b/README 2007-07-19 13:14:00.000000000 +0200
@@ -14,7 +14,9 @@
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
+
+copy the folder "multi8b" to any writable folder of your choice and type:
+$ make
The main targets of the makefile are listed below (following the design flow).
diff -Naur documentation/alliance-examples/pgcd/Makefile alliance-examples/pgcd/Makefile
--- documentation/alliance-examples/pgcd/Makefile 2004-05-24 00:15:31.000000000 +0200
+++ alliance-examples/pgcd/Makefile 2007-07-19 13:14:00.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,8 +41,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 2
diff -Naur documentation/alliance-examples/pgcd/README alliance-examples/pgcd/README
--- documentation/alliance-examples/pgcd/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/pgcd/README 2007-07-19 13:14:00.000000000 +0200
@@ -15,5 +15,7 @@
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
+
+copy the folder "pgcd" to any writable folder of your choice and type:
+$ make
diff -Naur documentation/alliance-examples/sqrt32/Makefile alliance-examples/sqrt32/Makefile
--- documentation/alliance-examples/sqrt32/Makefile 2004-05-23 20:49:27.000000000 +0200
+++ alliance-examples/sqrt32/Makefile 2007-07-19 13:14:00.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,8 +41,8 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 5
diff -Naur documentation/alliance-examples/sqrt32/README alliance-examples/sqrt32/README
--- documentation/alliance-examples/sqrt32/README 2004-07-28 13:00:06.000000000 +0200
+++ alliance-examples/sqrt32/README 2007-07-19 13:14:00.000000000 +0200
@@ -14,4 +14,6 @@
following each step of the design flow from VHDL up to real layout in a
pseudo 0.35 techno.
-The environement variable ALLIANCE_TOP has to be set.
+
+copy the folder "sqrt32" to any writable folder of your choice and type:
+$ make
diff -Naur documentation/alliance-examples/sqrt8/Makefile alliance-examples/sqrt8/Makefile
--- documentation/alliance-examples/sqrt8/Makefile 2004-05-23 20:51:00.000000000 +0200
+++ alliance-examples/sqrt8/Makefile 2007-07-19 16:20:40.000000000 +0200
@@ -16,7 +16,9 @@
# | |
# \------------------------------------------------------------*/
ALLIANCE_BIN=$(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
VASY = $(ALLIANCE_BIN)/vasy
ASIMUT = $(ALLIANCE_BIN)/asimut
@@ -39,14 +41,14 @@
TOUCH = touch
TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
-RDS_TECHNO_SYMB = ../etc/techno-symb.rds
-RDS_TECHNO = ../etc/techno-035.rds
+RDS_TECHNO_SYMB = $(ALLIANCE_EXAMPLES)/etc/techno-symb.rds
+RDS_TECHNO = $(ALLIANCE_EXAMPLES)/etc/techno-035.rds
SPI_MODEL = $(ALLIANCE_TOP)/etc/spimodel.cfg
METAL_LEVEL = 5
# /*------------------------------------------------------------\
# | |
-# | Environement |
+# | Environment |
# | |
# \------------------------------------------------------------*/
@@ -161,9 +163,9 @@
# \------------------------------------------------------------*/
res_vasy_1.pat : sqrt8.vst sm.vbe sqrt8_model.vbe
- $(ENV_ASIMUT_VASY); $(ASIMUT) sqrt8 sqrt8 res_vasy_1
+ $(ENV_ASIMUT_VASY); $(ASIMUT) sqrt8 sqrt8 res_vasy_1
-res_synth_1.pat : sqrt8.vst sm.vst sqrt8_model.vst
+res_synth_1.pat : sqrt8.vst sm.vst sqrt8_model.vst
$(ENV_ASIMUT_SYNTH); $(ASIMUT) sqrt8 sqrt8 res_synth_1
@@ -257,7 +259,7 @@
# | |
# \------------------------------------------------------------*/
-lvx.done : sqrt8.vst sqrt8_e.al
+lvx.done : sqrt8.vst sqrt8_e.al
$(ENV_LVX); $(LVX) vst al sqrt8 sqrt8_e -f
$(TOUCH) lvx.done
@@ -313,4 +315,4 @@
$(RM) -f *.vst *.vbe *.boom *.done *.xsc *.al *.ap *.gpl *.gds \
*.log *.drc *.cif *.fin *.dat *.out sqrt8_e.spi res_synth_1.pat \
res_vasy_1.pat
-
+
alliance-log3.patch:
--- NEW FILE alliance-log3.patch ---
diff -Naur mbk/man3/Makefile.am man3/Makefile.am
--- mbk/man3/Makefile.am 2003-04-03 16:56:36.000000000 +0200
+++ man3/Makefile.am 2007-07-25 01:33:26.000000000 +0200
@@ -87,7 +87,6 @@
locon.3 \
lofig.3 \
lofigchain.3 \
- log.3 \
loins.3 \
losig.3 \
lotrs.3 \
diff -Naur mbk/man3/Makefile.in man3/Makefile.in
--- mbk/man3/Makefile.in 2007-07-18 19:04:43.000000000 +0200
+++ man3/Makefile.in 2007-07-25 01:33:18.000000000 +0200
@@ -422,7 +422,6 @@
locon.3 \
lofig.3 \
lofigchain.3 \
- log.3 \
loins.3 \
losig.3 \
lotrs.3 \
alliance-perms.patch:
--- NEW FILE alliance-perms.patch ---
--- configure 2006-05-09 12:10:10.000000000 +0200
+++ configure_mod 2007-07-17 02:24:57.000000000 +0200
@@ -26054,9 +26054,9 @@
-INSTALL_DATA='${INSTALL} -m 664'
+INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL} -m 775'
+INSTALL_PROGRAM='${INSTALL} -m 755'
cat >>confdefs.h <<_ACEOF
alliance-run.patch:
--- NEW FILE alliance-run.patch ---
diff -Naur documentation/alliance-run/amd2901_core.ioc alliance-run/amd2901_core.ioc
--- documentation/alliance-run/amd2901_core.ioc 2003-10-09 14:31:00.000000000 +0200
+++ alliance-run/amd2901_core.ioc 2007-07-13 15:42:11.000000000 +0200
@@ -1,4 +1,3 @@
-# Copyright (c) 1997 by Cadence. All rights reserved.
###################################################################
# In each of TOP()/BOTTOM()/LEFT()/RIGHT() section, there are #
# placed IOs. In the IGNORE() section, the IOs are ignored #
diff -Naur documentation/alliance-run/Makefile alliance-run/Makefile
--- documentation/alliance-run/Makefile 2003-12-01 14:07:11.000000000 +0100
+++ alliance-run/Makefile 2007-07-13 15:37:37.000000000 +0200
@@ -12,7 +12,9 @@
STANDART_PATH = PATH=$(STANDART_BIN); export PATH
# Standart Alliance binary access paths.
ALLIANCE_BIN = $(ALLIANCE_TOP)/bin
+
+ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
# --------------------------------------------------------------------
# Standarts binaries.
alliance-tutorials.patch:
--- NEW FILE alliance-tutorials.patch ---
diff -Naur documentation/tutorials/place_and_route/tex/place_and_route.tex tutorials/place_and_route/tex/place_and_route.tex
--- documentation/tutorials/place_and_route/tex/place_and_route.tex 2004-10-16 14:51:56.000000000 +0200
+++ tutorials/place_and_route/tex/place_and_route.tex 2007-08-02 18:37:05.000000000 +0200
@@ -2,6 +2,7 @@
% $Id: place_and_route.tex,v 1.5 2004/10/16 12:51:56 fred Exp $
% $Log: place_and_route.tex,v $
% Revision 1.5 2004/10/16 12:51:56 fred
+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
% Erasing the psfig include from the file, changed the font to 10 pt
% instead of 12 (sparing trees and not being payed by the thickness of
% my production) and changing font to charter since I got tired of
@@ -11,14 +12,14 @@
\documentclass{article}
\usepackage[dvips]{graphics}
\usepackage[english]{babel}
-\usepackage{doublespace}
+\usepackage{setspace}
\usepackage{epsf}
\usepackage{fancybox}
\usepackage{fancyheadings}
\usepackage{float}
\usepackage{graphicx}
\usepackage{here}
-\usepackage{isolatin1}
+\usepackage[latin1]{inputenc}
\usepackage{charter}
\usepackage{picinpar}
\usepackage{rotate}
@@ -92,7 +93,8 @@
\date{}
\author{
Frederic AK\hspace{2cm} Kai-shing LAM\\
-Modified by LJ
+Modified by LJ\\
+Modified by Chitlesh GOORAH (18/07/2007)
}
\maketitle
@@ -121,7 +123,7 @@
{2.2} inverter Diagram
-{2.3} Buffer diagram
+{2.3} Buffer diagram
{2.4} sxlib gauge
@@ -149,8 +151,8 @@
{3.8} pads placement
\\
-{4} {\bf Annexes}
-
+{4} {\bf Annexes}
+
\newpage
{\huge
PART 3 : }
@@ -158,9 +160,9 @@
{\huge
Place and route
}
-
+
All the files used in this part are located under \\
-\texttt{/tutorial/place\_and\_route/src} directory.\\
+\texttt{/usr/share/doc/alliance-doc-5.0/tutorial/place\_and\_route/src} directory.\\
This directory contents three subdirectories and one Makefile :
\begin{itemize}\itemsep=-.8ex
@@ -169,7 +171,7 @@
\item inv
\begin{itemize}\itemsep=-.8ex
\item Makefile
- \item inv.vbe : behavioral description
+ \item inv.vbe : behavioral description
\item inv\_x1.ap : inverter cell design using GRAAL
\end{itemize}
\item buffer
@@ -178,7 +180,7 @@
\item buffer.vbe : behavioral description
\item buf\_x2.ap : buffer cell design using GRAAL
\end{itemize}
-\item amd2901
+\item amd2901
\begin{itemize}\itemsep=-.8ex
\item Makefile
\item amd2901\_ctl.vbe : behavioral description of control
@@ -212,9 +214,9 @@
The predefined cells concepts, model and
hierarchy will be introduced .\\
Then this tutorial contain the methodology used in Alliance to produce
-the amd2901 physical layout that you conceived in Alliance Tutorial
+the amd2901 physical layout that you conceived in Alliance Tutorial
PART 2 "Synthesis" (All the documents used will be provided to you).
-
+
\newpage
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -225,7 +227,7 @@
%------------------------
The library can be enriched by new cells with {\bf GRAAL} editor .\\
{ \bf GRAAL } is an editor of \/{\underline{symbolic }} {\it
-layout} integrating the drawing rules checker {\bf DRUC} and also
+layout} integrating the drawing rules checker {\bf DRUC} and also
a net extractor.
The first part here aims to draw an inverter cell inv\_x1 in the shape
of a predefined cell of sxlib complyiant with provided
@@ -236,7 +238,7 @@
Some tools of Alliance use a particular technological
environment. It is indicated by the environment variable {\bf
RDS\_TECHNO\_NAME} which must be set to
-{\bf/alliance/etc/cmos.rds}
+{\bf/etc/alliance/cmos.rds}
\subsubsection{GRAAL}
%--------------------
@@ -244,7 +246,7 @@
with the menu { \bf CREATE }:
\begin{itemize}\itemsep=-.4ex
\item The ''instance'' (physical cells importation)
-\item The abutment boxes which define the cell limits
+\item The abutment boxes which define the cell limits
\item Segments: DiffN, DiffP, Poly, Alu1, Alu2... CAluX is used to specify
a possible rectangle area for the connectors.
\item VIAs or contacts: ContDiffN, ContDiffP, ContPoly and
@@ -254,10 +256,10 @@
\end{itemize}
{\bf GRAAL} uses the environment variable {\bf
-GRAAL\_TECHNO\_NAME}. It must be set to {\bf/alliance/etc/cmos.graal}.
+GRAAL\_TECHNO\_NAME}. It must be set to {\bf/etc/alliance/cmos.graal}.
Steps to follow to create a sxlib cell by respecting the sxlib gauge :
-( cf 2.4 Sxlib gauge )
+( cf 2.4 Sxlib gauge )
\begin{itemize}\itemsep=-.4ex
\item place the supply Vdd and Vss using the menu CREATE->Segment
\item place the VIAs using the menu CREATE->VIA
@@ -267,7 +269,7 @@
\item link the transistor P and the transistor N with the Poly segment using the menu CREATE->Segment
\item supply each transistor by linking them with Ndiff and Pdiff segments and VIAs contacts
\item define the cell limit with an abutment box using the menu CREATE->Abutment Box
-\end{itemize}
+\end{itemize}
\subsubsection{COUGAR}
%--------------------
@@ -276,7 +278,7 @@
with the format { \bf ap }.
To extract a netlist at transistor level, use the following command :
\begin{commandline}
- > cougar -t file1 file2
+ > cougar -t file1 file2
\end{commandline}
{ \bf COUGAR } uses the environment variables { \bf MBK\_IN\_PH }
@@ -286,14 +288,14 @@
the following environment variables: \\
\begin{commandline}
- > MBK_IN_PH = ap
- > export MBK_IN_PH
- > MBK_OUT_LO = spi
+ > MBK_IN_PH = ap
+ > export MBK_IN_PH
+ > MBK_OUT_LO = spi
> export MBK_OUT_LO
\end{commandline}
\begin{commandline}
- > cougar -t circuit circuit
+ > cougar -t circuit circuit
\end{commandline}
The resulting spice netlist can be then simulated using a SPICE simulator and a given
@@ -301,7 +303,7 @@
The schematic of the transistor neltlist can also be displayed using {\bf XSCH} :
\begin{commandline}
- > xsch -I spi -l circuit
+ > xsch -I spi -l circuit
\end{commandline}
\subsection{inverter Diagram}
@@ -341,12 +343,12 @@
\begin{itemize}\itemsep=-.4ex
\item The sxlib cells have whole 50 lambdas height and a multiple of 5 lambdas width.
-\item The supply Vdd and Vss are carried out in Calu1; they have 6 lambdas width and are
+\item The supply Vdd and Vss are carried out in Calu1; they have 6 lambdas width and are
horizontally placed in top and bottom of the cell.
\item The transistors P are placed close to the Vdd while transistors N are placed close
to the Vss.
\item Box N must have 24 lambdas height .
-\item The special segments CAluX (CAlu1, Calu2, CAlu3...) form the cell interface (PORT\_MAP)
+\item The special segments CAluX (CAlu1, Calu2, CAlu3...) form the cell interface (PORT\_MAP)
and play the role of ''flat'' connectors. They must be placed on a 5x5 grid and can be anywhere in the cell.
\item The special segments TAlux (TAlu1, TAlu2...) are used to indicate the obstacles for the
router. When you want to protect AluX segment, it is necessary to cover them
@@ -356,7 +358,7 @@
\item The boxes N and P must be polarized. { \bf It should be respectively connected to Vdd and Vss }.
\end{itemize}
-You will find a summary of these constraints on the diagram
+You will find a summary of these constraints on the diagram
\ref{Fig:gabarit}:
\begin{figure}[H]\centering
@@ -443,7 +445,7 @@
\begin{itemize}\itemsep=-.4ex
\item The data-path contains the regular parts of Amd2901, the registers
and the arithmetic logic unit.
-\item The control part contains irregular logic,
+\item The control part contains irregular logic,
the instructions decoding and the `` flags '' computation.
\end{itemize}
@@ -463,7 +465,7 @@
The data-path and the control part will be placed and routed together and not separately. \\
You will use also {\bf lvx}, the netlists comparator. When the
system is too complex it is difficult to use {\bf proof}, the
-formal comparator (calculations too long). A netlists comparison
+formal comparator (calculations too long). A netlists comparison
then is used. Test the two methods ({\bf proof} and {\bf
lvx}).
@@ -499,7 +501,7 @@
%---------------------------------
Generally, the file describing a netlist must have the same
-name as the one describing its physical layout
+name as the one describing its physical layout
(but of course the file extention is not the same).
The file amd2901\_dpt.vst (LOFIG) must correspond to the file
amd2901\_dpt.ap (PHFIG). The same applies to the file
@@ -517,7 +519,7 @@
\noindent GENLIB\_SAVE\_LOFIG()\\
This permits to generate a structural description in a { \bf
-VST } file. At the same time, { \bf genlib } will generate
+VST } file. At the same time, { \bf genlib } will generate
physical descriptions of each column in { \bf AP } files.
It is up to you to place these columns explicitly. \\
Edit again the file amd2901\_dpt.c and include the lines :\\
@@ -526,7 +528,7 @@
\noindent /* add here you placement directives !! */ \\
\noindent GENLIB\_SAVE\_PHFIG()\\
-For this placement task, you have the following {\bf GENLIB} functions :
+For this placement task, you have the following {\bf GENLIB} functions :
\begin{itemize}\itemsep=-.4ex
\item GENLIB\_PLACE()
@@ -540,12 +542,12 @@
\end{itemize}
Use {\bf GENLIB} manual. The placement of the data-path columns
-should not be done randomly. The routing feasibility and the quality
+should not be done randomly. The routing feasibility and the quality
of the resulting layout depends on it !\\
Use genlib to generate all:
\begin{commandline}
- >genlib amd2901_dpt
+ >genlib amd2901_dpt
\end{commandline}
The figure \ref{Fig:preplacement} summarizes the followed process:
@@ -568,12 +570,12 @@
%---------------------------------
In the same manner, edit agin the file amd2901\_core.c and insert
- data-path explicitly. You should not place the part controls.
+ data-path explicitly. You should not place the part controls.
This one exists only in the form of a structural description.
-It is the placer { \bf ocp } that will undertake some
+It is the placer { \bf ocp } that will undertake some
(during the placement of the heart { \bf ocp } detects which are the
-cells not placed and supplements the placement).
-Nevertheless you should reserve enough space for the cells placement
+cells not placed and supplements the placement).
+Nevertheless you should reserve enough space for the cells placement
{ \bf to the top } of the data-path.
Include the lines:\\
@@ -583,28 +585,28 @@
Space necessary to the placer to place the cells of the control part
will be determined by successive approximations. You will have to
-adjust dimensions of the heart abutment box
+adjust dimensions of the heart abutment box
(GENLIB\_DEF\_AB()).
Use the command:
\begin{commandline}
- > genlib amd2901_core
+ > genlib amd2901_core
\end{commandline}
and
\begin{commandline}
- > ocp -partial amd2901_core -ioc amd2901_core amd2901_core amd2901_core_p
+ > ocp -partial amd2901_core -ioc amd2901_core amd2901_core amd2901_core_p
\end{commandline}
The option {\bf -- partial} indicates that you give a partial
-placement of the data-path.
+placement of the data-path.
The option { \bf -- ioc } permits to specify a placement for external
-connectors described in a .ioc file.
-This file, amd2901\_core.ioc is provided to you (Modify it according
+connectors described in a .ioc file.
+This file, amd2901\_core.ioc is provided to you (Modify it according
to your predefined placement.
The connectors must be in the north and in the south of your circuit).
-The third argument is the netlist heart filename, the fourth is the
+The third argument is the netlist heart filename, the fourth is the
name of the { \bf .ap } resulting file.
The figure \ref{Fig:placement} summarize the followed process:
@@ -620,7 +622,7 @@
Routing the heart by using { \bf NERO } in the following way:
\begin{commandline}
- > nero -v -3 -p amd2901_core_p amd2901_core amd2901_core
+ > nero -v -3 -p amd2901_core_p amd2901_core amd2901_core
\end{commandline}
%The option { \bf -- place } indicates that you transmit a placement, that of the heart.
@@ -639,10 +641,10 @@
\subsection{pads placement}
%---------------------------------
-The core of the AMD2001 is completed.
+The core of the AMD2001 is completed.
We focus now on the chip with pads description, placement and routing.
Those pads allow the connection of the inputs/outputs of the core with
-the external nets of the chip.
+the external nets of the chip.
The tool {\bf ring} instanciates pads that has been specified
in a {\bf vst} netlist, place them using a file { \bf .rin }
@@ -662,7 +664,7 @@
Name it `` amd2902\_chip.rin '' and apply the command \\
\begin{commandline}
- > ring amd2901_chip amd2901_chip
+ > ring amd2901_chip amd2901_chip
\end{commandline}
We will validate the work of {\bf ring} with the tools { \bf druc
@@ -682,7 +684,7 @@
> cougar -f amd2901_chip
\end{commandline}
-Compare two netlists :
+Compare two netlists :
\begin{commandline}
> lvx vst al amd2901_chip amd2901_chip -f
\end{commandline}
@@ -698,7 +700,7 @@
the circuit on the level transistor: \\
\begin{commandline}
-> cougar -t amd2901_chip amd2901_chip
+> cougar -t amd2901_chip amd2901_chip
\end{commandline}
\\
@@ -706,7 +708,7 @@
\begin{commandline}
> make view_ctl_logic
\end{commandline}
-
+
If you want to see the data-path physical layout:
\begin{commandline}
> make view_dpt_physic
@@ -723,7 +725,7 @@
\begin{commandline}
> make view_chip_simulation
\end{commandline}
-
+
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\newpage
diff -Naur documentation/tutorials/simulation/tex/simulation.tex tutorials/simulation/tex/simulation.tex
--- documentation/tutorials/simulation/tex/simulation.tex 2004-10-16 14:52:05.000000000 +0200
+++ tutorials/simulation/tex/simulation.tex 2007-07-18 15:47:13.000000000 +0200
@@ -2,6 +2,7 @@
% $Id: simulation.tex,v 1.5 2004/10/16 12:52:05 fred Exp $
% $Log: simulation.tex,v $
% Revision 1.5 2004/10/16 12:52:05 fred
+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
% Erasing the psfig include from the file, changed the font to 10 pt
% instead of 12 (sparing trees and not being payed by the thickness of
% my production) and changing font to charter since I got tired of
@@ -13,13 +14,13 @@
\documentclass{article}
\usepackage[dvips]{graphics}
\usepackage[english]{babel}
-\usepackage{doublespace}
+\usepackage{setspace}
\usepackage{fancybox}
\usepackage{fancyheadings}
\usepackage{float}
\usepackage{graphicx}
\usepackage{here}
-\usepackage{isolatin1}
+\usepackage[latin1]{inputenc}
\usepackage{charter}
\usepackage{picinpar}
\usepackage{rotate}
@@ -96,7 +97,8 @@
\date{}
\author{Frederic AK \hspace{2cm} Kai-shing LAM\\
-Modified by LJ
+Modified by LJ\\
+Modified by Chitlesh GOORAH (18/07/2007)
}
\maketitle
@@ -171,7 +173,7 @@
}
All the files used in this part are located in the \\
-\texttt{/tutorial/simulation/src} directory.\\
+\texttt{/usr/share/doc/alliance-doc-5.0/tutorial/simulation/src} directory.\\
This directory contains two subdirectories and one Makefile :
\begin{itemize}
\item The Makefile allows you to validate automatically the entire simulation part
@@ -626,13 +628,13 @@
\bf SXLIB }. For the functionality of the various cells and their
interface, the sxlib man is available. The behavioral
description of each cell is present in \\
-{\bf /alliance/cells/sxlib }.
+{\bf \$ALLIANCE\_TOP/cells/sxlib }.
You must set the environment variable { \bf MBK\_CATA\_LIB }
to be able to reach these cells.
\begin{commandline}
- > MBK_CATA_LIB=/alliance/cells/sxlib
+ > MBK_CATA_LIB=$ALLIANCE_TOP/cells/sxlib
> export MBK_CATA_LIB
\end{commandline}
diff -Naur documentation/tutorials/start/start.tex tutorials/start/start.tex
--- documentation/tutorials/start/start.tex 2004-10-16 14:52:13.000000000 +0200
+++ tutorials/start/start.tex 2007-07-18 13:28:50.000000000 +0200
@@ -4,12 +4,13 @@
% Original Version 1.0 in text form by Francois Pecheux
% Version for Alliance releases 2.0 and up by Frederic Petrot
% Modified by czo for Alliance release 4.0 (01/2000)
-% TODO : no fully working, needs some adjustements
+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
+% TODO : no fully working, needs some adjustments
% $Id: start.tex,v 1.5 2004/10/16 12:52:13 fred Exp $
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\documentclass{article}
-\usepackage{charter,doublespace,here,fancybox}
+\usepackage{charter,setspace,here,fancybox}
\textwidth 15cm
\textheight 23cm
\oddsidemargin +0.75cm
@@ -20,7 +21,7 @@
% Since it is tt, any char is fine
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newlength{\verbatimbox}
-\settowidth{\verbatimbox}{\scriptsize\tt
+\settowidth{\verbatimbox}{\scriptsize\tt
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
}
\newenvironment{framedverbatim}
@@ -33,8 +34,8 @@
\begin{Sbox}\begin{minipage}{.979\textwidth}\begin{Verbatim}}%
{\end{Verbatim}\end{minipage}\end{Sbox}\setlength{\shadowsize}{2pt}%
\shadowbox{\TheSbox}\normalsize\par\noindent}
-
-
+
+
%%%%%%%%%%%%%%%%%%%%%%%%
%
@@ -56,9 +57,9 @@
\begin{quote}
\em
These tutorials introduce the design flow to be used in the
-\textbf{Alliance} CAD framework for the design and verification of a
+\textbf{Alliance} CAD framework for the design and verification of a
standard cells circuit, including the pads.
-Each step of the desgin flow is supported by one or more specific
+Each step of the desgin flow is supported by one or more specific
tools, whose use is briefly explained in the tutorials.
These texts are meant to be simple and comprehensive, and are to be used
@@ -77,7 +78,7 @@
proceeding, as it describes the main steps of the design conceptually.
\section{Before starting}
-In those tutorials you will learn the practical use of the following
+In those tutorials you will learn the practical use of the following
\textbf{Alliance} tools :
In the first tutorial (simulation/ directory) :
@@ -103,30 +104,32 @@
In the third tutorial (synthesis/ directory) :
\begin{itemize}
\item \textbf{syf} : Finite state machine synthesizer.
-\item \textbf{boom} : Boolean optimization of a logic level behavioral
+\item \textbf{boom} : Boolean optimization of a logic level behavioral
description (VHDL data flow).
-\item \textbf{boog} : Mapping of a behavioral descriptiononto a standard cell
+\item \textbf{boog} : Mapping of a behavioral descriptiononto a standard cell
library.
-\item \textbf{loon} : Fanout optimizer, global optimizer and timing analyser of
+\item \textbf{loon} : Fanout optimizer, global optimizer and timing analyser of
\item \textbf{scapin} : Scan Path insertion
\item \textbf{xsch} : Graphical schematic viewer.
\end{itemize}
-If you run a \texttt{c-like} shell, like \texttt{csh} or \texttt{tcsh},
+If you run a \texttt{c-like} shell, like \texttt{csh} or \texttt{tcsh},
try to run the following command :
\begin{phraseverbatim}
-~alp/addaccu %-) source /alliance/etc/alc_env.csh
+~alp/addaccu %-) source /etc/profile.d/alc_env.csh
\end{phraseverbatim}
-Otherwise, if you run a \texttt{sh-like} shell, try to run the following
+Otherwise, if you run a \texttt{sh-like} shell, try to run the following
command :
\begin{phraseverbatim}
-~alp/addaccu %-) source /alliance/alc_env.sh
+~alp/addaccu %-) source /etc/profile.d/alc_env.sh
\end{phraseverbatim}
\\
+When a user logs in, these environment variables are automatically set from various places.
+\\
Before we proceed to the tutorial, you must make sure that the
-\textbf{Alliance} tools are readilly available when invoking them at the
+\textbf{Alliance} tools are readilly available when invoking them at the
prompt.
The prompt in represented in the following text by the symbol~:
\begin{phraseverbatim}
@@ -136,7 +139,7 @@
directory, and \texttt{\%-)} is supposed to give us courage!
\section{Execution environment set up}
-Later, before you will start examining alliance tools, you will probably want
+Later, before you will start examining alliance tools, you will probably want
to know the environment variables setup.
To see it, please enter the following command :
@@ -147,18 +150,21 @@
\begin{figure}[H]\center\leavevmode
\begin{framedverbatim}
~alp/addaccu %-) env | grep MBK
-MBK_OUT_PH=ap
-MBK_CATAL_NAME=CATAL
+MBK_IN_PH=ap
MBK_SCALE_X=100
+MBK_CATAL_NAME=CATAL
+MBK_OUT_PH=ap
+MBK_OUT_LO=vst
MBK_VSS=vss
-MBK_CATA_LIB=.:/alliance/cells/sxlib:/alliance/cells/padlib
-MBK_WORK_LIB=.
-MBK_VDD=vdd
MBK_C4_LIB=./cellsC4
+MBK_VDD=vdd
+MBK_TARGET_LIB=\$ALLIANCE\_TOP/cells/sxlib
MBK_IN_LO=vst
-MBK_IN_PH=ap
-MBK_TARGET_LIB=/alliance/cells/sxlib
-MBK_OUT_LO=vst
+MBK_WORK_LIB=.
+MBK_CATA_LIB=.:/usr/lib/alliance/cells/sxlib:/usr/lib/alliance/cells/dp_sxlib:
+/usr/lib/alliance/cells/rflib:/usr/lib/alliance/cells/ramlib:
+/usr/lib/alliance/cells/romlib:/usr/lib/alliance/cells/pxlib:
+/usr/lib/alliance/cells/padlib
\end{framedverbatim}
\caption{\label{mbk} \texttt{MBK} environment variables.}
\end{figure}
@@ -167,12 +173,12 @@
variables are documented in each tutorial.
\section{File Formats}
-One of the interesting features of \textbf{Alliance} is that different
+One of the interesting features of \textbf{Alliance} is that different
file formats can be used for both netlist and layout view.
-However,
-in the design methodology we wish to promote, some formats are
+However,
+in the design methodology we wish to promote, some formats are
recommended.
-The \texttt{vst}, structural \textbf{VHDL}, is dedicated to netlist
+The \texttt{vst}, structural \textbf{VHDL}, is dedicated to netlist
specification.
The \texttt{al} format is dedicated to extracted layout representation.
The \texttt{ap} format is the usual layout format.
diff -Naur documentation/tutorials/synthesis/src/amd2901/Makefile tutorials/synthesis/src/amd2901/Makefile
--- documentation/tutorials/synthesis/src/amd2901/Makefile 2002-07-25 14:50:18.000000000 +0200
+++ tutorials/synthesis/src/amd2901/Makefile 2007-07-18 19:34:53.000000000 +0200
@@ -2,17 +2,17 @@
all: EXAMPLE VAR CATAL02 res.pat
-VAR:
+VAR:
MBK_IN_LO=vst;export MBK_IN_LO ;\
- MBK_CATA_LIB=/asim/alliance/cells/sxlib;export MBK_CATA_LIB
+ MBK_CATA_LIB=$ALLIANCE_TOP/cells/sxlib;export MBK_CATA_LIB
CATAL01:
- echo amd2901_ctl C >CATAL
+ echo amd2901_ctl C >CATAL
echo amd2901_dpt C >>CATAL
CATAL02:
echo amd2901_dpt C >CATAL
-
+
EXAMPLE:
genlib circuit
@@ -38,7 +38,7 @@
res2.pat: amd2901_chip.vst pattern.pat amd2901_core.vst CATAL
asimut amd2901_chip pattern res2
- touch amd2901_chip.vst
+ touch amd2901_chip.vst
clean :
rm -f Makefile-* \
diff -Naur documentation/tutorials/synthesis/tex/synthesis.tex tutorials/synthesis/tex/synthesis.tex
--- documentation/tutorials/synthesis/tex/synthesis.tex 2004-10-16 14:52:17.000000000 +0200
+++ tutorials/synthesis/tex/synthesis.tex 2007-07-18 15:46:54.000000000 +0200
@@ -2,6 +2,7 @@
% $Id: synthesis.tex,v 1.4 2004/10/16 12:52:17 fred Exp $
% $Log: synthesis.tex,v $
% Revision 1.4 2004/10/16 12:52:17 fred
+% Modified by Chitlesh GOORAH for Alliance release 5.0 (18/07/2007)
% Erasing the psfig include from the file, changed the font to 10 pt
% instead of 12 (sparing trees and not being payed by the thickness of
% my production) and changing font to charter since I got tired of
@@ -11,13 +12,13 @@
\documentclass{article}
\usepackage[dvips]{graphics}
\usepackage[english]{babel}
-\usepackage{doublespace}
+\usepackage{setspace}
\usepackage{fancybox}
\usepackage{fancyheadings}
\usepackage{float}
\usepackage{graphicx}
\usepackage{here}
-\usepackage{isolatin1}
+\usepackage[latin1]{inputenc}
\usepackage{charter}
\usepackage{picinpar}
\usepackage{rotate}
@@ -89,7 +90,8 @@
\date{}
\author{
Ak Frederic\hspace{2cm} Lam Kai-shing\\
-Modified by LJ
+Modified by LJ\\
+Modified by Chitlesh GOORAH (18/07/2007)
}
\maketitle
@@ -220,7 +222,7 @@
}
All the files used in this part are located under \\
-\texttt{/tutorial/synthesis/src} directory.\\
+\texttt{/usr/share/doc/alliance-doc-5.0/tutorial/synthesis/src} directory.\\
This directory contents four subdirectories and one Makefile :
\begin{itemize}\itemsep=-.8ex
--- NEW FILE alliance.fedora ---
=== License ===
Alliance CAD system is distributed under the GNU license v2.
There is no more or less limitation than the ones defined by the GPL v2.
You are kindly requested to mention
" Designed with alliance (c) LIP6, Université Pierre et Marie Curie"
so as to spread the word about "alliance CAD system" and its development team.
=== Proper Usage ===
It is recommended to source the alc_env.sh or alc_env.csh before using alliance.
source /etc/profile.d/alc_env.sh
(for example)
When a user logs in, environment variables on
/etc/profile.d/alc_env.sh
are set will be automatically sourced.
=== Overview ===
A general overview of Alliance CAD System can be found here:
/usr/share/doc/alliance-doc-5.0/design-flow/index.html
(available on the alliance-doc rpm)
=== Tutorials ===
The tutorials can be found at /usr/share/doc/alliance-doc-5.0/tutorials/
(available on the alliance-doc rpm)
It is recommended to first read /usr/share/doc/alliance-doc-5.0/overview.pdf
1. start.pdf
2. simulation.pdf
3. synthesis.pdf
4. place_and_route.pdf
=========================================================================================
Chitlesh Goorah (chitlesh AT fedoraproject DOT org)
Alliance development team and other contributors (ASIM/LIP6/UPMC)
alliance-users AT asim DOT lip6 DOT fr
--- NEW FILE alliance.spec ---
%define prefix %{_libdir}/%{name}
%define snapshot 20070718
Name: alliance
Version: 5.0
Release: 7.%{snapshot}snap%{?dist}
Summary: Alliance VLSI CAD Sytem
License: GPL
Group: Applications/Engineering
Source: http://www-asim.lip6.fr/pub/alliance/distribution/5.0/%{name}-%{version}-%{snapshot}.tar.gz
URL: http://www-asim.lip6.fr/recherche/alliance/
Patch1: alliance-examples.patch
Patch2: alliance-run.patch
Patch3: alliance-perms.patch
Patch4: alliance-tutorials.patch
Patch5: alliance-log3.patch
Source1: xsch.desktop
Source2: dreal.desktop
Source3: xpat.desktop
Source4: xfsm.desktop
Source5: xvpn.desktop
Source6: graal.desktop
Source7: alliance.fedora
# Chitlesh's donated pictures to alliance
Source8: graal.png
Source9: dreal.png
Source10: xvpn.png
Source11: xfsm.png
Source12: xpat.png
Source13: xsch.png
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: lesstif-devel libXt-devel byacc desktop-file-utils bison
BuildRequires: libXp-devel libXpm-devel libstdc++-devel flex m4
BuildRequires: transfig ghostscript tetex-latex
%description
Alliance is a complete set of free CAD tools and portable libraries for
VLSI design. It includes a VHDL compiler and simulator, logic synthesis
tools, and automatic place and route tools.
A complete set of portable CMOS libraries is provided, including a RAM
generator, a ROM generator and a data-path compiler.
Alliance is the result of more than ten years effort spent at ASIM department
of LIP6 laboratory of the Pierre et Marie Curie University (Paris VI, France).
Alliance has been used for research projects such as the 875 000 transistors
StaCS superscalar microprocessor and 400 000 transistors IEEE Gigabit HSL
Router.
You are kindly requested to mention
" Designed with alliance (c) LIP6, Université Pierre et Marie Curie"
so as to spread the word about "alliance CAD system" and its development team.
Alliance provides CAD tools covering most of all the digital design flow:
* VHDL Compilation and Simulation
* Model checking and formal proof
* RTL and Logic synthesis
* Data-Path compilation
* Macro-cells generation
* Place and route
* Layout edition
* Netlist extraction and verification
* Design rules checking
%package doc
Summary: Alliance VLSI CAD Sytem - Documentations
Group: Applications/Engineering
Requires: %{name} = %{version}-%{release}
Requires: gnuplot
%description doc
Documentation and tutorials for the Alliance VLSI CAD Sytem.
%prep
%setup -q
%{__cp} -p %{SOURCE7} .
# using the formal %%{_sysconfdir} in favor of $${ALLIANCE_TOP}/etc
sed -i "s|sysconfdir='\${prefix}/etc'|sysconfdir=%{_sysconfdir}/%{name}|" configure
sed -i "s|\${ALLIANCE_TOP}/etc|%{_sysconfdir}/%{name}|" {xfsm,xvpn,xpat,xsch}/src/Makefile*
sed -i "s|etcdir=\$(prefix)/etc|etcdir=%{_sysconfdir}/%{name}|" \
{attila,dreal,elp,graal,mbkspice,rds,scapin,sea,xfsm,xvpn,xpat,xsch}/etc/Makefile.am
sed -i "s|etcdir = \$(prefix)/etc|etcdir = %{_sysconfdir}/%{name}|" \
{attila,dreal,elp,graal,mbkspice,rds,scapin,sea,xfsm,xvpn,xpat,xsch}/etc/Makefile.in
sed -i "s|etcdir=\$(prefix)/etc|etcdir=%{_sysconfdir}/profile.d|" distrib/etc/Makefile.am
sed -i "s|etcdir = \$(prefix)/etc|etcdir = %{_sysconfdir}/profile.d|" distrib/etc/Makefile.in
%patch1 -p0 -b .examples
%patch2 -p0 -b .run
# fixing permissions
%patch3 -p0 -b .perms
## Updating old tutorials
%patch4 -p0 -b .tutorials
pushd documentation/tutorials
for folder in place_and_route/tex simulation/tex start synthesis/tex; do
pushd $folder
%{__make}
popd
done
popd
#conflicts with man-pages and is a duplicate of log.1.gz
%patch5 -p0 -b .duplicate
# removing useless copyrighted (by Cadence) lines from the examples
# and even in alliance-run
# https://www-asim.lip6.fr/wws/arc/alliance-users/2007-07/msg00006.html
pushd documentation/alliance-examples
for cadence in adder4/adder4.ioc divcas4/divcas4.ioc mipsR3000/sce/mips_core.ioc \
amd2901/amd2901_core.ioc amd2901-vasy/amd2901.ioc ; do
sed -i "s|# Copyright (c) 1997 by Cadence. All rights reserved.|#|" $cadence
done
popd
# make sure the man pages are UTF-8...
for nonUTF8 in distrib/doc/alc_origin.1 alcban/man1/alcbanner.1 \
loon/doc/loon.1 m2e/doc/man1/m2e.1 boog/doc/boog.1 ; do
%{_bindir}/iconv -f ISO-8859-1 -t utf-8 $nonUTF8 > $nonUTF8.conv
%{__mv} -f $nonUTF8.conv $nonUTF8
done
#wrong-file-end-of-line-encoding
sed -i 's/\r//' documentation/alliance-examples/mipsR3000/asm/*
%build
export ALLIANCE_TOP=%{prefix}
%configure --prefix=%{prefix} \
--enable-alc-shared \
--disable-static \
--includedir=%{prefix}/include \
--libdir=%{prefix}/lib \
--bindir=%{prefix}/bin
# disabling rpath
sed -i 's|^hardcode_libdir_flag_spec="\\${wl}--rpath \\${wl}\\$libdir"|hardcode_libdir_flag_spec=""|g' libtool
sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool
# clean unused-direct-shlib-dependencies
sed -i -e 's! -shared ! -Wl,--as-needed\0!g' libtool
# Is not parallel-build-safe
%{__make}
%install
%{__rm} -rf %{buildroot}
%{__make} INSTALL="install -p" DESTDIR=%{buildroot} install
# Set execution rights on the alc_env.* batchs and adjust ALLIANCE_TOP.
pushd %{buildroot}%{_sysconfdir}/profile.d
chmod 0644 alc_env.*
sed -i "s|@DATE@|`date`|" alc_env*
# fixing *** ERROR *** : Variable MBK_SPI_MODEL not found.
echo "MBK_SPI_MODEL=\$ALLIANCE_TOP/etc/spimodel.cfg; export MBK_SPI_MODEL" >> alc_env.sh
echo "setenv MBK_SPI_MODEL \"\${ALLIANCE_TOP}/etc/spimodel.cfg\"" >> alc_env.csh
#don't override $MANPATH
sed -i "s|\$ALLIANCE_TOP/man|\$MANPATH|" alc_env*
sed "s|ALLIANCE_TOP *= *\([^;]*\)|ALLIANCE_TOP=%{prefix}|" alc_env.sh
sed "s|setenv *ALLIANCE_TOP *\([^;]*\)|setenv ALLIANCE_TOP %{prefix}|" alc_env.csh
popd
# documentation
%{__cp} -pr %{buildroot}%{prefix}/doc/ .
%{__cp} -pr %{buildroot}%{prefix}/tutorials/ .
%{__cp} -pr %{buildroot}%{prefix}/examples/alliance-examples/ .
%{__rm} -rf %{buildroot}%{prefix}/doc/
%{__rm} -rf %{buildroot}%{prefix}/tutorials/
%{__rm} -rf %{buildroot}%{prefix}/examples/
# correcting minor documentation details
sed -i "s|/bin/zsh|/bin/sh|" doc/alliance-run/bench.zsh
find %{buildroot} -name '*.la' -exec rm -f {} ';'
# Adding icons for the menus
%{__mkdir} -p %{buildroot}%{_datadir}/icons/hicolor/48x48/apps/
%{__cp} -p %{SOURCE8} %{SOURCE9} %{SOURCE10} %{SOURCE11} %{SOURCE12} %{SOURCE13} \
%{buildroot}%{_datadir}/icons/hicolor/48x48/apps/
# desktop files
for desktopfile in %{SOURCE1} %{SOURCE2} %{SOURCE3} %{SOURCE4} %{SOURCE5} %{SOURCE6}; do
desktop-file-install --vendor fedora \
--add-category Engineering \
--dir %{buildroot}%{_datadir}/applications/ \
$desktopfile
done
## Makefiles and tex folder cleanups
pushd tutorials
for folder in place_and_route/tex simulation/tex start synthesis/tex; do
%{__rm} -rf $folder
done
popd
# Architecture independent files
%{__mkdir} -p %{buildroot}%{_datadir}/%{name}/
%{__mv} %{buildroot}%{prefix}/cells %{buildroot}%{_datadir}/%{name}/
# protecting hardcoded links
ln -sf ../../..%{_sysconfdir}/%{name} %{buildroot}%{prefix}/etc
ln -sf ../../..%{_datadir}/%{name}/cells %{buildroot}%{prefix}/cells
%{__mkdir} -p %{buildroot}%{_sysconfdir}/ld.so.conf.d/
cat > %{buildroot}%{_sysconfdir}/ld.so.conf.d/%{name}.conf << EOF
# Alliance VLSI design system
%{prefix}/lib
EOF
# removing tools for compiling and installing Alliance tools
# These are for the packager (i.e me) and not for user
%{__rm} -f %{buildroot}%{_sysconfdir}/%{name}/attila.conf
%{__rm} -f %{buildroot}%{prefix}/bin/attila
%{__rm} -f %{buildroot}%{_datadir}/man/man1/attila*
%{__rm} -f doc/html/alliance/*attila.html
%{__rm} -f doc/pdf/attila.pdf
%post
/sbin/ldconfig
touch --no-create %{_datadir}/icons/hicolor || :
%{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || :
%postun
/sbin/ldconfig
touch --no-create %{_datadir}/icons/hicolor || :
%{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || :
%clean
%{__rm} -rf %{buildroot}
#These headers are useful for the _usage_ of the binaries
#without these headers some of the binaries will be broken by default
%files
%doc CHANGES LICENCE COPYING* FAQ alliance.fedora
%defattr(-,root,root,-)
%{prefix}/
%{_datadir}/%{name}
%dir %{_sysconfdir}/%{name}
%config(noreplace) %{_sysconfdir}/%{name}/prol.elp
%config(noreplace) %{_sysconfdir}/%{name}/se_defaults.mac
%config(noreplace) %{_sysconfdir}/%{name}/spimodel.cfg
%config(noreplace) %{_sysconfdir}/%{name}/sxlib.scapin
%config %{_sysconfdir}/%{name}/cmos.*
%config %{_sysconfdir}/%{name}/*.par
%config %{_sysconfdir}/ld.so.conf.d/*
%{_datadir}/icons/hicolor/48x48/apps/*
%{_mandir}/man?/*
%{_datadir}/applications/fedora-*.desktop
%{_sysconfdir}/profile.d/alc_env.*
%files doc
%doc doc/html/
%doc doc/design-flow
%doc doc/pdf/*.pdf
%doc doc/overview/*.ps
%doc doc/overview/*.pdf
%doc tutorials/
#Makefiles are present in alliance-examples/*. It is normal because
# * it gives the VLSI designer a template on how to create his own
# Makefile for alliance (VLSI designers normally don't know how to do so)
# * it is not part of the build, but part of the working environment of the user
%doc alliance-examples/
%doc doc/alliance-run/
%changelog
* Sun Aug 12 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-7.20070718snap
- moved Architecture independent files to %%{_datadir}/%%{name}
- Uses verbs in the comments line for desktop files
* Thu Aug 02 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-6.20070718snap
- chose libdir/alliance as prefix
- added new icons to the menus
- removed useless attila
- fixed MANPATH override
* Sat Jul 28 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-5.20070718snap
- fixed unused-direct-shlib-dependency and undefined-non-weak-symbol warnings
* Tue Jul 24 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-4.20070718snap
- removed X-Desktop-File-Install-Version=0.10 from desktop files
- moved the alc_env to /etc/profile.d
- updated to meet reviewer's statements - #248649
* Thu Jul 19 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-3.20070718snap
- New upstream release which includes bug fixes
* Wed Jul 18 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-2.20060509snap
- minor fixes to the tutorials + added transfig ghostscript tetex-latex as BR
- corrected some hardcoded links in the scripts
- removed %%preun and updated alliance.fedora
- spec file updated to satisfy the review
* Tue Jul 17 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-1
- prepared spec file for review and spec clean ups
- removed rm and ln from %%post and %%preun
- removed log.3.gz from mandir since it's a duplicate and conflicts with man-pages
* Sat Jul 14 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-0.7
- since it is not parallel-build-safe, smp mflags are removed : (by wwoods)
- added missing BR : flex : (by wwoods)
- added missing BR : bison: (by rdieter)
* Fri Jul 13 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-0.6
- removing useless copyrighted lines from .ioc files
- added alliance.fedora among the %%doc
* Thu Jul 12 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-0.5
- removing copyrighted materials
- patching the remaining examples so that they will still be valid under another folder
* Wed Jul 04 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-0.4
- removing unwanted debug duplicates
* Wed May 02 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-0.3
- added desktop files
* Wed Feb 14 2007 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-0.2
- fixing documentations
* Wed Dec 13 2006 Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> - 5.0-0.1
- Initial package
* Thu Feb 17 2005 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- Synch with current version: bug & compliance with gcc 3.4.x.
* Fri Jul 16 2004 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- Added Tutorial sub-package (now managed by autoconf/automake).
- Removed release tag, must be given at compile time using the
--define command line argument of rpmbuild (see mkdistrib).
* Sat Nov 15 2003 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- assert is now in assert.h, patch mut.h to include it if
GCC_VERSION >= 3003 (gcc >= 3.3.x).
* Sat Oct 18 2003 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- Synched with 2003/10/18 version.
- Missing depcomp : added "--add-missing --copy" to the individual
packages in autostuff, so the first who needs depcomp will add
it at top level.
* Sun Oct 13 2002 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- autoconf m4 macros moved back in the Alliance source tree to avoid
re-declaration on our development computers (on which the macros
are in teh source tree).
- Adopt the versioning scheme from czo.
- Try to switch to dynamic libraries.
* Wed Jul 17 2002 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- Moved autoconf m4 macros to /usr/share/aclocal.
- Synched with the current CVS version of Alliance.
* Fri May 31 2002 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- GenPat added.
- GenLib docs added.
- seplace/seroute/sea bug fixes.
* Thu May 16 2002 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- Corrected buggy substitution of ALLIANCE_TOP in alc_env.csh.
- Remove the alc_env.* scripts in "/etc/profile.d" only if this
is the last package to be removed.
* Mon May 6 2002 Jean-Paul.Chaput <Jean-Paul.Chaput at lip6.fr>
- Initial packaging for release 5.0 (alpha stage).
--- NEW FILE dreal.desktop ---
[Desktop Entry]
Encoding=UTF-8
Name=Alliance: Dreal
Exec=dreal
Icon=dreal.png
Type=Application
Terminal=false
GenericName=Alliance
Categories=Education;Science;
Comment=View the Real layout
--- NEW FILE graal.desktop ---
[Desktop Entry]
Encoding=UTF-8
Name=Alliance: Graal
Exec=graal
Icon=graal.png
Type=Application
Terminal=false
GenericName=Alliance
Categories=Education;Science;
Comment=Edits physical layouts
--- NEW FILE xfsm.desktop ---
[Desktop Entry]
Encoding=UTF-8
Name=Alliance: Xfsm
Exec=xfsm
Icon=xfsm.png
Type=Application
Terminal=false
GenericName=Alliance
Categories=Education;Science;
Comment=View Finite State Machines
--- NEW FILE xpat.desktop ---
[Desktop Entry]
Encoding=UTF-8
Name=Alliance: Xpat
Exec=xpat
Icon=xpat.png
Type=Application
Terminal=false
GenericName=Alliance
Categories=Education;Science;
Comment=View the Patterns
--- NEW FILE xsch.desktop ---
[Desktop Entry]
Encoding=UTF-8
Name=Alliance: Xsch
Exec=xsch
Icon=xsch.png
Type=Application
Terminal=false
GenericName=Alliance
Categories=Education;Science;
Comment=View the Schematic
--- NEW FILE xvpn.desktop ---
[Desktop Entry]
Encoding=UTF-8
Name=Alliance: Xvpn
Exec=xvpn
Icon=xvpn.png
Type=Application
Terminal=false
GenericName=Alliance
Categories=Education;Science;
Comment=View the Petri Nets
Index: .cvsignore
===================================================================
RCS file: /cvs/extras/rpms/alliance/FC-6/.cvsignore,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- .cvsignore 13 Aug 2007 19:36:39 -0000 1.1
+++ .cvsignore 13 Aug 2007 20:54:39 -0000 1.2
@@ -0,0 +1 @@
+alliance-5.0-20070718.tar.gz
Index: sources
===================================================================
RCS file: /cvs/extras/rpms/alliance/FC-6/sources,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- sources 13 Aug 2007 19:36:39 -0000 1.1
+++ sources 13 Aug 2007 20:54:39 -0000 1.2
@@ -0,0 +1 @@
+917f4493c09f6f5c49d5a606a5e9bbd8 alliance-5.0-20070718.tar.gz
More information about the fedora-extras-commits
mailing list