[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

rpms/krb5/devel krb5-1.6-manpage-paths.patch,NONE,1.1



Author: nalin

Update of /cvs/pkgs/rpms/krb5/devel
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv27351

Added Files:
	krb5-1.6-manpage-paths.patch 
Log Message:
- as before, but get the location of the kpropd acl file correct


krb5-1.6-manpage-paths.patch:

--- NEW FILE krb5-1.6-manpage-paths.patch ---
--- krb5-1.3/src/appl/bsd/klogind.M
+++ krb5-1.3/src/appl/bsd/klogind.M
@@ -27,7 +27,7 @@
 the port indicated in /etc/inetd.conf.  A typical /etc/inetd.conf
 configuration line for \fIklogind\fP might be:
 
-klogin stream tcp nowait root /usr/cygnus/sbin/klogind klogind -e5c
+klogin stream tcp nowait root /usr/kerberos/sbin/klogind klogind -e5c
 
 When a service request is received, the following protocol is initiated:
 
--- krb5-1.3/src/appl/bsd/kshd.M
+++ krb5-1.3/src/appl/bsd/kshd.M
@@ -8,7 +8,7 @@
 .SH NAME
 kshd \- kerberized remote shell server
 .SH SYNOPSIS
-.B /usr/local/sbin/kshd 
+.B /usr/kerberos/sbin/kshd 
 [
 .B \-kr45ec
 ]
@@ -30,7 +30,7 @@
 on the port indicated in /etc/inetd.conf.  A typical /etc/inetd.conf
 configuration line for \fIkrshd\fP might be:
 
-kshell	stream	tcp	nowait	root	/usr/local/sbin/kshd	kshd -5c
+kshell	stream	tcp	nowait	root	/usr/kerberos/sbin/kshd	kshd -5c
 
 When a service request is received, the following protocol is initiated:
 
--- krb5-1.3/src/appl/sample/sserver/sserver.M
+++ krb5-1.3/src/appl/sample/sserver/sserver.M
@@ -59,7 +59,7 @@
 using a line in
 /etc/inetd.conf that looks like this:
 .PP
-sample  stream  tcp     nowait  root /usr/local/sbin/sserver	sserver
+sample  stream  tcp     nowait  root /usr/kerberos/sbin/sserver	sserver
 .PP
 Since \fBsample\fP is normally not a port defined in /etc/services, you will
 usually have to add a line to /etc/services which looks like this:
--- krb5-1.3/src/appl/telnet/telnetd/telnetd.8
+++ krb5-1.3/src/appl/telnet/telnetd/telnetd.8
@@ -37,7 +37,7 @@
 .SM DARPA TELNET
 protocol server
 .SH SYNOPSIS
-.B /usr/libexec/telnetd
+.B /usr/kerberos/sbin/telnetd
 [\fB\-a\fP \fIauthmode\fP] [\fB\-B\fP] [\fB\-D\fP] [\fIdebugmode\fP]
 [\fB\-edebug\fP] [\fB\-h\fP] [\fB\-I\fP\fIinitid\fP] [\fB\-l\fP]
 [\fB\-k\fP] [\fB\-n\fP] [\fB\-r\fP\fIlowpty-highpty\fP] [\fB\-s\fP]
--- krb5-1.3/src/config-files/kdc.conf.M
+++ krb5-1.3/src/config-files/kdc.conf.M
@@ -235,7 +235,7 @@
 realm names and the [capaths] section of its krb5.conf file
 
 .SH FILES 
-/usr/local/var/krb5kdc/kdc.conf
+/var/kerberos/krb5kdc/kdc.conf
 
 .SH SEE ALSO
 krb5.conf(5), krb5kdc(8)
--- krb5-1.3/src/kadmin/cli/kadmin.M
+++ krb5-1.3/src/kadmin/cli/kadmin.M
@@ -733,9 +733,9 @@
 .RS
 .TP
 EXAMPLE:
-kadmin: ktremove -k /usr/local/var/krb5kdc/kadmind.keytab kadmin/admin
+kadmin: ktremove -k /var/kerberos/krb5kdc/kadm5.keytab kadmin/admin
 Entry for principal kadmin/admin with kvno 3 removed
-	from keytab WRFILE:/usr/local/var/krb5kdc/kadmind.keytab.
+	from keytab WRFILE:/var/kerberos/krb5kdc/kadm5.keytab.
 kadmin:
 .RE
 .fi
--- krb5-1.3/src/slave/kprop.M
+++ krb5-1.3/src/slave/kprop.M
@@ -39,7 +39,7 @@
 This is done by transmitting the dumped database file to the slave
 server over an encrypted, secure channel.  The dump file must be created
 by kdb5_util, and is normally KPROP_DEFAULT_FILE
-(/usr/local/var/krb5kdc/slave_datatrans).
+(/var/kerberos/krb5kdc/slave_datatrans).
 .SH OPTIONS
 .TP
 \fB\-r\fP \fIrealm\fP
@@ -51,7 +51,7 @@
 \fB\-f\fP \fIfile\fP
 specifies the filename where the dumped principal database file is to be
 found; by default the dumped database file is KPROP_DEFAULT_FILE
-(normally /usr/local/var/krb5kdc/slave_datatrans).
+(normally /var/kerberos/krb5kdc/slave_datatrans).
 .TP
 \fB\-P\fP \fIport\fP
 specifies the port to use to contact the
--- krb5-1.3/src/slave/kpropd.M
+++ krb5-1.3/src/slave/kpropd.M
@@ -69,7 +69,7 @@
 This is done by adding a line to the inetd.conf file which looks like
 this:
 
-kprop	stream	tcp	nowait	root	/usr/local/sbin/kpropd	kpropd
+kprop	stream	tcp	nowait	root	/usr/kerberos/sbin/kpropd	kpropd
 
 However, kpropd can also run as a standalone deamon, if the
 .B \-S
@@ -87,13 +87,13 @@
 \fB\-f\fP \fIfile\fP
 specifies the filename where the dumped principal database file is to be
 stored; by default the dumped database file is KPROPD_DEFAULT_FILE
-(normally /usr/local/var/krb5kdc/from_master).
+(normally /var/kerberos/krb5kdc/from_master).
 .TP
 .B \-p
 allows the user to specify the pathname to the
 .IR kdb5_util (8)
 program; by default the pathname used is KPROPD_DEFAULT_KDB5_UTIL
-(normally /usr/local/sbin/kdb5_util).
+(normally /usr/kerberos/sbin/kdb5_util).
 .TP
 .B \-S
 turn on standalone mode.  Normally, kpropd is invoked out of
@@ -124,14 +124,14 @@
 allows the user to specify the path to the
 .KR kpropd.acl
 file; by default the path used is KPROPD_ACL_FILE
-(normally /usr/local/var/krb5kdc/kpropd.acl).
+(normally /var/kerberos/krb5kdc/kpropd.acl).
 .SH FILES
 .TP "\w'kpropd.acl\ \ 'u"
 kpropd.acl
 Access file for
 .BR kpropd ;
 the default location is KPROPD_ACL_FILE (normally
-/usr/local/var/krb5kdc/kpropd.acl).
+/var/kerberos/krb5kdc/kpropd.acl).
 Each entry is a line containing the principal of a host from which the
 local machine will allow Kerberos database propagation via kprop.
 .SH SEE ALSO


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]