rpms/kernel/devel linux-2.6-e1000e-add-support-for-82567LM-3-and-82567LF-3-ICH10D-parts.patch, NONE, 1.1 linux-2.6-e1000e-add-support-for-new-82574L-part.patch, NONE, 1.1 linux-2.6-e1000e-add-support-for-the-82567LM-4-device.patch, NONE, 1.1 kernel.spec, 1.944, 1.945
Mark McLoughlin
markmc at fedoraproject.org
Wed Sep 10 17:00:29 UTC 2008
- Previous message (by thread): rpms/dap-netcdf_handler/devel .cvsignore, 1.8, 1.9 dap-netcdf_handler.spec, 1.17, 1.18 sources, 1.8, 1.9
- Next message (by thread): rpms/dap-hdf4_handler/devel hdf4_handler-3.7.9-gcc43.patch, NONE, 1.1 .cvsignore, 1.7, 1.8 dap-hdf4_handler.spec, 1.20, 1.21 sources, 1.7, 1.8 dap-hdf4_handler-3.7.7-open.patch, 1.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: markmc
Update of /cvs/pkgs/rpms/kernel/devel
In directory cvs1.fedora.phx.redhat.com:/tmp/cvs-serv29375
Modified Files:
kernel.spec
Added Files:
linux-2.6-e1000e-add-support-for-82567LM-3-and-82567LF-3-ICH10D-parts.patch
linux-2.6-e1000e-add-support-for-new-82574L-part.patch
linux-2.6-e1000e-add-support-for-the-82567LM-4-device.patch
Log Message:
* Wed Sep 10 2008 Mark McLoughlin <markmc at redhat.com>
- Pull in new e1000e hardware support (e.g. ich10) from net-next-2.6
linux-2.6-e1000e-add-support-for-82567LM-3-and-82567LF-3-ICH10D-parts.patch:
--- NEW FILE linux-2.6-e1000e-add-support-for-82567LM-3-and-82567LF-3-ICH10D-parts.patch ---
>From f4187b56e1f8a05dd110875d5094b21b51ebd79b Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan at intel.com>
Date: Tue, 26 Aug 2008 18:36:50 -0700
Subject: [PATCH 2/3] e1000e: add support for 82567LM-3 and 82567LF-3 (ICH10D) parts
Add support for new LOM devices on the latest generation ICHx platforms.
Signed-off-by: Bruce Allan <bruce.w.allan at intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher at intel.com>
Signed-off-by: Jeff Garzik <jgarzik at redhat.com>
---
drivers/net/e1000e/defines.h | 2 +
drivers/net/e1000e/e1000.h | 3 +
drivers/net/e1000e/ethtool.c | 22 +++++-
drivers/net/e1000e/hw.h | 3 +
drivers/net/e1000e/ich8lan.c | 154 +++++++++++++++++++++++++++++++++++++++---
drivers/net/e1000e/netdev.c | 25 +++++++
drivers/net/e1000e/phy.c | 85 +++++++++++++++++++++++
7 files changed, 280 insertions(+), 14 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 14b0e6c..4b21fa9 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -505,6 +505,7 @@
#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
/* 1000BASE-T Control Register */
#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
@@ -540,6 +541,7 @@
#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */
/* NVM Addressing bits based on type (0-small, 1-large) */
#define E1000_EECD_ADDR_BITS 0x00000400
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index ac4e506..ef66dc4 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -98,6 +98,7 @@ enum e1000_boards {
board_80003es2lan,
board_ich8lan,
board_ich9lan,
+ board_ich10lan,
};
struct e1000_queue_stats {
@@ -374,6 +375,7 @@ extern struct e1000_info e1000_82572_info;
extern struct e1000_info e1000_82573_info;
extern struct e1000_info e1000_ich8_info;
extern struct e1000_info e1000_ich9_info;
+extern struct e1000_info e1000_ich10_info;
extern struct e1000_info e1000_es2_info;
extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
@@ -446,6 +448,7 @@ extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw);
extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index e21c9e0..a89498d 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -781,6 +781,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
case e1000_82573:
case e1000_ich8lan:
case e1000_ich9lan:
+ case e1000_ich10lan:
toggle = 0x7FFFF033;
break;
default:
@@ -833,7 +834,9 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
for (i = 0; i < mac->rar_entry_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
- 0x8003FFFF, 0xFFFFFFFF);
+ ((mac->type == e1000_ich10lan) ?
+ 0x8007FFFF : 0x8003FFFF),
+ 0xFFFFFFFF);
for (i = 0; i < mac->mta_reg_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -905,12 +908,23 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Test each interrupt */
for (i = 0; i < 10; i++) {
- if ((adapter->flags & FLAG_IS_ICH) && (i == 8))
- continue;
-
/* Interrupt to test */
mask = 1 << i;
+ if (adapter->flags & FLAG_IS_ICH) {
+ switch (mask) {
+ case E1000_ICR_RXSEQ:
+ continue;
+ case 0x00000100:
+ if (adapter->hw.mac.type == e1000_ich8lan ||
+ adapter->hw.mac.type == e1000_ich9lan)
+ continue;
+ break;
+ default:
+ break;
+ }
+ }
+
if (!shared_int) {
/*
* Disable the interrupt to be reported in
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index d0e7b46..5d2acc5 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -357,6 +357,8 @@ enum e1e_registers {
#define E1000_DEV_ID_ICH10_R_BM_LM 0x10CC
#define E1000_DEV_ID_ICH10_R_BM_LF 0x10CD
#define E1000_DEV_ID_ICH10_R_BM_V 0x10CE
+#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE
+#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF
#define E1000_FUNC_1 1
@@ -367,6 +369,7 @@ enum e1000_mac_type {
e1000_80003es2lan,
e1000_ich8lan,
e1000_ich9lan,
+ e1000_ich10lan,
};
enum e1000_media_type {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index b5fc2c9..0e76bb0 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -43,7 +43,8 @@
* 82567LM-2 Gigabit Network Connection
* 82567LF-2 Gigabit Network Connection
* 82567V-2 Gigabit Network Connection
- * 82562GT-3 10/100 Network Connection
+ * 82567LF-3 Gigabit Network Connection
+ * 82567LM-3 Gigabit Network Connection
* 82567LM-4 Gigabit Network Connection
*/
@@ -158,12 +159,15 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw);
static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
u32 offset, u8 byte);
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 *data);
static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
u16 *data);
static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
u8 size, u16 *data);
static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -898,6 +902,56 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
}
/**
+ * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
+ * @hw: pointer to the HW structure
+ * @bank: pointer to the variable that returns the active bank
+ *
+ * Reads signature byte from the NVM using the flash access registers.
+ **/
+static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ /* flash bank size is in words */
+ u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
+ u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
+ u8 bank_high_byte = 0;
+
+ if (hw->mac.type != e1000_ich10lan) {
+ if (er32(EECD) & E1000_EECD_SEC1VAL)
+ *bank = 1;
+ else
+ *bank = 0;
+ } else {
+ /*
+ * Make sure the signature for bank 0 is valid,
+ * if not check for bank1
+ */
+ e1000_read_flash_byte_ich8lan(hw, act_offset, &bank_high_byte);
+ if ((bank_high_byte & 0xC0) == 0x80) {
+ *bank = 0;
+ } else {
+ /*
+ * find if segment 1 is valid by verifying
+ * bit 15:14 = 10b in word 0x13
+ */
+ e1000_read_flash_byte_ich8lan(hw,
+ act_offset + bank1_offset,
+ &bank_high_byte);
+
+ /* bank1 has a valid signature equivalent to SEC1V */
+ if ((bank_high_byte & 0xC0) == 0x80) {
+ *bank = 1;
+ } else {
+ hw_dbg(hw, "ERROR: EEPROM not present\n");
+ return -E1000_ERR_NVM;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/**
* e1000_read_nvm_ich8lan - Read word(s) from the NVM
* @hw: pointer to the HW structure
* @offset: The offset (in bytes) of the word(s) to read.
@@ -913,6 +967,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u32 act_offset;
s32 ret_val;
+ u32 bank = 0;
u16 i, word;
if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
@@ -925,10 +980,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
if (ret_val)
return ret_val;
- /* Start with the bank offset, then add the relative offset. */
- act_offset = (er32(EECD) & E1000_EECD_SEC1VAL)
- ? nvm->flash_bank_size
- : 0;
+ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+ if (ret_val)
+ return ret_val;
+
+ act_offset = (bank) ? nvm->flash_bank_size : 0;
act_offset += offset;
for (i = 0; i < words; i++) {
@@ -1076,6 +1132,29 @@ static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
}
/**
+ * e1000_read_flash_byte_ich8lan - Read byte from flash
+ * @hw: pointer to the HW structure
+ * @offset: The offset of the byte to read.
+ * @data: Pointer to a byte to store the value read.
+ *
+ * Reads a single byte from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 *data)
+{
+ s32 ret_val;
+ u16 word = 0;
+
+ ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
+ if (ret_val)
+ return ret_val;
+
+ *data = (u8)word;
+
+ return 0;
+}
+
+/**
* e1000_read_flash_data_ich8lan - Read byte or word from NVM
* @hw: pointer to the HW structure
* @offset: The offset (in bytes) of the byte or word to read.
@@ -1206,7 +1285,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u32 i, act_offset, new_bank_offset, old_bank_offset;
+ u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
s32 ret_val;
u16 data;
@@ -1226,7 +1305,11 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
* write to bank 0 etc. We also need to erase the segment that
* is going to be written
*/
- if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
+ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+ if (ret_val)
+ return ret_val;
+
+ if (bank == 0) {
new_bank_offset = nvm->flash_bank_size;
old_bank_offset = 0;
e1000_erase_flash_bank_ich8lan(hw, 1);
@@ -2190,13 +2273,14 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
* 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
* to a lower speed.
*
- * Should only be called for ICH9 devices.
+ * Should only be called for ICH9 and ICH10 devices.
**/
void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
{
u32 phy_ctrl;
- if (hw->mac.type == e1000_ich9lan) {
+ if ((hw->mac.type == e1000_ich10lan) ||
+ (hw->mac.type == e1000_ich9lan)) {
phy_ctrl = er32(PHY_CTRL);
phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
E1000_PHY_CTRL_GBE_DISABLE;
@@ -2254,6 +2338,39 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
}
/**
+ * e1000_get_cfg_done_ich8lan - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status. NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ **/
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
+{
+ u32 bank = 0;
+
+ e1000e_get_cfg_done(hw);
+
+ /* If EEPROM is not marked present, init the IGP 3 PHY manually */
+ if (hw->mac.type != e1000_ich10lan) {
+ if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
+ (hw->phy.type == e1000_phy_igp_3)) {
+ e1000e_phy_init_script_igp3(hw);
+ }
+ } else {
+ if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
+ /* Maybe we should do a basic PHY config */
+ hw_dbg(hw, "EEPROM not present\n");
+ return -E1000_ERR_CONFIG;
+ }
+ }
+
+ return 0;
+}
+
+/**
* e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
* @hw: pointer to the HW structure
*
@@ -2303,7 +2420,7 @@ static struct e1000_phy_operations ich8_phy_ops = {
.check_reset_block = e1000_check_reset_block_ich8lan,
.commit_phy = NULL,
.force_speed_duplex = e1000_phy_force_speed_duplex_ich8lan,
- .get_cfg_done = e1000e_get_cfg_done,
+ .get_cfg_done = e1000_get_cfg_done_ich8lan,
.get_cable_length = e1000e_get_cable_length_igp_2,
.get_phy_info = e1000_get_phy_info_ich8lan,
.read_phy_reg = e1000e_read_phy_reg_igp,
@@ -2358,3 +2475,20 @@ struct e1000_info e1000_ich9_info = {
.nvm_ops = &ich8_nvm_ops,
};
+struct e1000_info e1000_ich10_info = {
+ .mac = e1000_ich10lan,
+ .flags = FLAG_HAS_JUMBO_FRAMES
+ | FLAG_IS_ICH
+ | FLAG_HAS_WOL
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_ERT
+ | FLAG_HAS_FLASH
+ | FLAG_APME_IN_WUC,
+ .pba = 10,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c3d7411..2d9bcb0 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -58,6 +58,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
[board_80003es2lan] = &e1000_es2_info,
[board_ich8lan] = &e1000_ich8_info,
[board_ich9lan] = &e1000_ich9_info,
+ [board_ich10lan] = &e1000_ich10_info,
};
#ifdef DEBUG
@@ -3201,6 +3202,27 @@ static void e1000_watchdog_task(struct work_struct *work)
&adapter->link_duplex);
e1000_print_link_info(adapter);
/*
+ * On supported PHYs, check for duplex mismatch only
+ * if link has autonegotiated at 10/100 half
+ */
+ if ((hw->phy.type == e1000_phy_igp_3 ||
+ hw->phy.type == e1000_phy_bm) &&
+ (hw->mac.autoneg == true) &&
+ (adapter->link_speed == SPEED_10 ||
+ adapter->link_speed == SPEED_100) &&
+ (adapter->link_duplex == HALF_DUPLEX)) {
+ u16 autoneg_exp;
+
+ e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
+
+ if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
+ e_info("Autonegotiated half duplex but"
+ " link partner cannot autoneg. "
+ " Try forcing full duplex if "
+ "link gets many collisions.\n");
+ }
+
+ /*
* tweak tx_queue_len according to speed/duplex
* and adjust the timeout factor
*/
@@ -4776,6 +4798,9 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
+
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index b133dcf..16724f8 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1720,6 +1720,91 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw)
return 0;
}
+/**
+ * e1000e_phy_init_script_igp3 - Inits the IGP3 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
+{
+ hw_dbg(hw, "Running IGP 3 PHY init script\n");
+
+ /* PHY init IGP 3 */
+ /* Enable rise/fall, 10-mode work in class-A */
+ e1e_wphy(hw, 0x2F5B, 0x9018);
+ /* Remove all caps from Replica path filter */
+ e1e_wphy(hw, 0x2F52, 0x0000);
+ /* Bias trimming for ADC, AFE and Driver (Default) */
+ e1e_wphy(hw, 0x2FB1, 0x8B24);
+ /* Increase Hybrid poly bias */
+ e1e_wphy(hw, 0x2FB2, 0xF8F0);
+ /* Add 4% to Tx amplitude in Gig mode */
+ e1e_wphy(hw, 0x2010, 0x10B0);
+ /* Disable trimming (TTT) */
+ e1e_wphy(hw, 0x2011, 0x0000);
+ /* Poly DC correction to 94.6% + 2% for all channels */
+ e1e_wphy(hw, 0x20DD, 0x249A);
+ /* ABS DC correction to 95.9% */
+ e1e_wphy(hw, 0x20DE, 0x00D3);
+ /* BG temp curve trim */
+ e1e_wphy(hw, 0x28B4, 0x04CE);
+ /* Increasing ADC OPAMP stage 1 currents to max */
+ e1e_wphy(hw, 0x2F70, 0x29E4);
+ /* Force 1000 ( required for enabling PHY regs configuration) */
+ e1e_wphy(hw, 0x0000, 0x0140);
+ /* Set upd_freq to 6 */
+ e1e_wphy(hw, 0x1F30, 0x1606);
+ /* Disable NPDFE */
+ e1e_wphy(hw, 0x1F31, 0xB814);
+ /* Disable adaptive fixed FFE (Default) */
+ e1e_wphy(hw, 0x1F35, 0x002A);
+ /* Enable FFE hysteresis */
+ e1e_wphy(hw, 0x1F3E, 0x0067);
+ /* Fixed FFE for short cable lengths */
+ e1e_wphy(hw, 0x1F54, 0x0065);
+ /* Fixed FFE for medium cable lengths */
+ e1e_wphy(hw, 0x1F55, 0x002A);
+ /* Fixed FFE for long cable lengths */
+ e1e_wphy(hw, 0x1F56, 0x002A);
+ /* Enable Adaptive Clip Threshold */
+ e1e_wphy(hw, 0x1F72, 0x3FB0);
+ /* AHT reset limit to 1 */
+ e1e_wphy(hw, 0x1F76, 0xC0FF);
+ /* Set AHT master delay to 127 msec */
+ e1e_wphy(hw, 0x1F77, 0x1DEC);
+ /* Set scan bits for AHT */
+ e1e_wphy(hw, 0x1F78, 0xF9EF);
+ /* Set AHT Preset bits */
+ e1e_wphy(hw, 0x1F79, 0x0210);
+ /* Change integ_factor of channel A to 3 */
+ e1e_wphy(hw, 0x1895, 0x0003);
+ /* Change prop_factor of channels BCD to 8 */
+ e1e_wphy(hw, 0x1796, 0x0008);
+ /* Change cg_icount + enable integbp for channels BCD */
+ e1e_wphy(hw, 0x1798, 0xD008);
+ /*
+ * Change cg_icount + enable integbp + change prop_factor_master
+ * to 8 for channel A
+ */
+ e1e_wphy(hw, 0x1898, 0xD918);
+ /* Disable AHT in Slave mode on channel A */
+ e1e_wphy(hw, 0x187A, 0x0800);
+ /*
+ * Enable LPLU and disable AN to 1000 in non-D0a states,
+ * Enable SPD+B2B
+ */
+ e1e_wphy(hw, 0x0019, 0x008D);
+ /* Enable restart AN on an1000_dis change */
+ e1e_wphy(hw, 0x001B, 0x2080);
+ /* Enable wh_fifo read clock in 10/100 modes */
+ e1e_wphy(hw, 0x0014, 0x0045);
+ /* Restart AN, Speed selection is 1000 */
+ e1e_wphy(hw, 0x0000, 0x1340);
+
+ return 0;
+}
+
/* Internal function pointers */
/**
--
1.5.4.1
linux-2.6-e1000e-add-support-for-new-82574L-part.patch:
--- NEW FILE linux-2.6-e1000e-add-support-for-new-82574L-part.patch ---
>From 4662e82b2cb41c60826e50474dd86dd5c6372b0c Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan at intel.com>
Date: Tue, 26 Aug 2008 18:37:06 -0700
Subject: [PATCH 3/3] e1000e: add support for new 82574L part
This new part has the same feature set as previous parts with the addition
of MSI-X support.
Signed-off-by: Bruce Allan <bruce.w.allan at intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher at intel.com>
Signed-off-by: Jeff Garzik <jgarzik at redhat.com>
---
drivers/net/e1000e/82571.c | 153 ++++++++++++++--
drivers/net/e1000e/defines.h | 13 ++
drivers/net/e1000e/e1000.h | 28 +++-
drivers/net/e1000e/es2lan.c | 2 +-
drivers/net/e1000e/ethtool.c | 38 +++-
drivers/net/e1000e/hw.h | 11 +-
drivers/net/e1000e/ich8lan.c | 18 ++-
drivers/net/e1000e/lib.c | 7 +-
drivers/net/e1000e/netdev.c | 409 +++++++++++++++++++++++++++++++++++++-----
drivers/net/e1000e/param.c | 27 +++
drivers/net/e1000e/phy.c | 109 +++++++++++-
11 files changed, 738 insertions(+), 77 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 462351c..b2c910c 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -38,6 +38,7 @@
* 82573V Gigabit Ethernet Controller (Copper)
* 82573E Gigabit Ethernet Controller (Copper)
* 82573L Gigabit Ethernet Controller
+ * 82574L Gigabit Network Connection
*/
#include <linux/netdevice.h>
@@ -54,6 +55,8 @@
#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
+
static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
@@ -63,6 +66,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
static s32 e1000_setup_link_82571(struct e1000_hw *hw);
static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
+static s32 e1000_led_on_82574(struct e1000_hw *hw);
/**
* e1000_init_phy_params_82571 - Init PHY func ptrs.
@@ -92,6 +97,9 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
case e1000_82573:
phy->type = e1000_phy_m88;
break;
+ case e1000_82574:
+ phy->type = e1000_phy_bm;
+ break;
default:
return -E1000_ERR_PHY;
break;
@@ -111,6 +119,10 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
if (phy->id != M88E1111_I_PHY_ID)
return -E1000_ERR_PHY;
break;
+ case e1000_82574:
+ if (phy->id != BME1000_E_PHY_ID_R2)
+ return -E1000_ERR_PHY;
+ break;
default:
return -E1000_ERR_PHY;
break;
@@ -150,6 +162,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
switch (hw->mac.type) {
case e1000_82573:
+ case e1000_82574:
if (((eecd >> 15) & 0x3) == 0x3) {
nvm->type = e1000_nvm_flash_hw;
nvm->word_size = 2048;
@@ -245,6 +258,17 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
break;
}
+ switch (hw->mac.type) {
+ case e1000_82574:
+ func->check_mng_mode = e1000_check_mng_mode_82574;
+ func->led_on = e1000_led_on_82574;
+ break;
+ default:
+ func->check_mng_mode = e1000e_check_mng_mode_generic;
+ func->led_on = e1000e_led_on_generic;
+ break;
+ }
+
return 0;
}
@@ -330,6 +354,8 @@ static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_id = 0;
switch (hw->mac.type) {
case e1000_82571:
@@ -345,6 +371,20 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
case e1000_82573:
return e1000e_get_phy_id(hw);
break;
+ case e1000_82574:
+ ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ return ret_val;
+
+ phy->id = (u32)(phy_id << 16);
+ udelay(20);
+ ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ return ret_val;
+
+ phy->id |= (u32)(phy_id);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+ break;
default:
return -E1000_ERR_PHY;
break;
@@ -421,7 +461,7 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- if (hw->mac.type != e1000_82573)
+ if (hw->mac.type != e1000_82573 && hw->mac.type != e1000_82574)
ret_val = e1000e_acquire_nvm(hw);
if (ret_val)
@@ -461,6 +501,7 @@ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
switch (hw->mac.type) {
case e1000_82573:
+ case e1000_82574:
ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
break;
case e1000_82571:
@@ -735,7 +776,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
* Must acquire the MDIO ownership before MAC reset.
* Ownership defaults to firmware after a reset.
*/
- if (hw->mac.type == e1000_82573) {
+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
extcnf_ctrl = er32(EXTCNF_CTRL);
extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
@@ -776,7 +817,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
* Need to wait for Phy configuration completion before accessing
* NVM and Phy.
*/
- if (hw->mac.type == e1000_82573)
+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574)
msleep(25);
/* Clear any pending interrupt events. */
@@ -843,7 +884,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
ew32(TXDCTL(0), reg_data);
/* ...for both queues. */
- if (mac->type != e1000_82573) {
+ if (mac->type != e1000_82573 && mac->type != e1000_82574) {
reg_data = er32(TXDCTL(1));
reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
E1000_TXDCTL_FULL_TX_DESC_WB |
@@ -918,19 +959,28 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
}
/* Device Control */
- if (hw->mac.type == e1000_82573) {
+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
reg = er32(CTRL);
reg &= ~(1 << 29);
ew32(CTRL, reg);
}
/* Extended Device Control */
- if (hw->mac.type == e1000_82573) {
+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
reg = er32(CTRL_EXT);
reg &= ~(1 << 23);
reg |= (1 << 22);
ew32(CTRL_EXT, reg);
}
+
+ /* PCI-Ex Control Register */
+ if (hw->mac.type == e1000_82574) {
+ reg = er32(GCR);
+ reg |= (1 << 22);
+ ew32(GCR, reg);
+ }
+
+ return;
}
/**
@@ -947,7 +997,7 @@ void e1000e_clear_vfta(struct e1000_hw *hw)
u32 vfta_offset = 0;
u32 vfta_bit_in_reg = 0;
- if (hw->mac.type == e1000_82573) {
+ if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) {
if (hw->mng_cookie.vlan_id != 0) {
/*
* The VFTA is a 4096b bit-field, each identifying
@@ -976,6 +1026,48 @@ void e1000e_clear_vfta(struct e1000_hw *hw)
}
/**
+ * e1000_check_mng_mode_82574 - Check manageability is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Reads the NVM Initialization Control Word 2 and returns true
+ * (>0) if any manageability is enabled, else false (0).
+ **/
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
+{
+ u16 data;
+
+ e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+ return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
+}
+
+/**
+ * e1000_led_on_82574 - Turn LED on
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED on.
+ **/
+static s32 e1000_led_on_82574(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+
+ ctrl = hw->mac.ledctl_mode2;
+ if (!(E1000_STATUS_LU & er32(STATUS))) {
+ /*
+ * If no link, then turn LED on by setting the invert bit
+ * for each LED that's "on" (0x0E) in ledctl_mode2.
+ */
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
+ }
+ ew32(LEDCTL, ctrl);
+
+ return 0;
+}
+
+/**
* e1000_update_mc_addr_list_82571 - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
@@ -1018,7 +1110,8 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw)
* the default flow control setting, so we explicitly
* set it to full.
*/
- if (hw->mac.type == e1000_82573)
+ if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) &&
+ hw->fc.type == e1000_fc_default)
hw->fc.type = e1000_fc_full;
return e1000e_setup_link(hw);
@@ -1045,6 +1138,7 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
switch (hw->phy.type) {
case e1000_phy_m88:
+ case e1000_phy_bm:
ret_val = e1000e_copper_link_setup_m88(hw);
break;
case e1000_phy_igp_2:
@@ -1114,11 +1208,10 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
return ret_val;
}
- if (hw->mac.type == e1000_82573 &&
+ if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) &&
*data == ID_LED_RESERVED_F746)
*data = ID_LED_DEFAULT_82573;
- else if (*data == ID_LED_RESERVED_0000 ||
- *data == ID_LED_RESERVED_FFFF)
+ else if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
*data = ID_LED_DEFAULT;
return 0;
@@ -1265,13 +1358,13 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
}
static struct e1000_mac_operations e82571_mac_ops = {
- .mng_mode_enab = E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT,
+ /* .check_mng_mode: mac type dependent */
/* .check_for_link: media type dependent */
.cleanup_led = e1000e_cleanup_led_generic,
.clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
.get_bus_info = e1000e_get_bus_info_pcie,
/* .get_link_up_info: media type dependent */
- .led_on = e1000e_led_on_generic,
+ /* .led_on: mac type dependent */
.led_off = e1000e_led_off_generic,
.update_mc_addr_list = e1000_update_mc_addr_list_82571,
.reset_hw = e1000_reset_hw_82571,
@@ -1312,6 +1405,22 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
.write_phy_reg = e1000e_write_phy_reg_m88,
};
+static struct e1000_phy_operations e82_phy_ops_bm = {
+ .acquire_phy = e1000_get_hw_semaphore_82571,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit_phy = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
+ .get_cfg_done = e1000e_get_cfg_done,
+ .get_cable_length = e1000e_get_cable_length_m88,
+ .get_phy_info = e1000e_get_phy_info_m88,
+ .read_phy_reg = e1000e_read_phy_reg_bm2,
+ .release_phy = e1000_put_hw_semaphore_82571,
+ .reset_phy = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_phy_reg = e1000e_write_phy_reg_bm2,
+};
+
static struct e1000_nvm_operations e82571_nvm_ops = {
.acquire_nvm = e1000_acquire_nvm_82571,
.read_nvm = e1000e_read_nvm_eerd,
@@ -1375,3 +1484,21 @@ struct e1000_info e1000_82573_info = {
.nvm_ops = &e82571_nvm_ops,
};
+struct e1000_info e1000_82574_info = {
+ .mac = e1000_82574,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_MSIX
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
+ | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .pba = 20,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_bm,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 4b21fa9..48f79ec 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -71,9 +71,11 @@
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_EIAME 0x01000000
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
/* Receive Descriptor bit definitions */
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
@@ -299,6 +301,7 @@
#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
/* Header split receive */
+#define E1000_RFCTL_ACK_DIS 0x00001000
#define E1000_RFCTL_EXTEN 0x00008000
#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
@@ -363,6 +366,11 @@
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
+#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
+#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
+#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
/*
* This defines the bits that are set in the Interrupt Mask
@@ -386,6 +394,11 @@
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
+#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
+#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
+#define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */
+#define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */
+#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */
/* Interrupt Cause Set */
#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index ef66dc4..0a1916b 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -62,6 +62,11 @@ struct e1000_info;
e_printk(KERN_NOTICE, adapter, format, ## arg)
+/* Interrupt modes, as used by the IntMode paramter */
+#define E1000E_INT_MODE_LEGACY 0
+#define E1000E_INT_MODE_MSI 1
+#define E1000E_INT_MODE_MSIX 2
+
/* Tx/Rx descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 4096
@@ -95,6 +100,7 @@ enum e1000_boards {
board_82571,
board_82572,
board_82573,
+ board_82574,
board_80003es2lan,
board_ich8lan,
board_ich9lan,
@@ -147,6 +153,12 @@ struct e1000_ring {
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
+ char name[IFNAMSIZ + 5];
+ u32 ims_val;
+ u32 itr_val;
+ u16 itr_register;
+ int set_itr;
+
struct sk_buff *rx_skb_top;
struct e1000_queue_stats stats;
@@ -275,6 +287,9 @@ struct e1000_adapter {
u32 test_icr;
u32 msg_enable;
+ struct msix_entry *msix_entries;
+ int int_mode;
+ u32 eiac_mask;
u32 eeprom_wol;
u32 wol;
@@ -307,6 +322,7 @@ struct e1000_info {
#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
#define FLAG_IS_ICH (1 << 9)
+#define FLAG_HAS_MSIX (1 << 10)
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_IS_QUAD_PORT_A (1 << 12)
#define FLAG_IS_QUAD_PORT (1 << 13)
@@ -365,6 +381,8 @@ extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
extern void e1000e_update_stats(struct e1000_adapter *adapter);
+extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
+extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
extern unsigned int copybreak;
@@ -373,6 +391,7 @@ extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw);
extern struct e1000_info e1000_82571_info;
extern struct e1000_info e1000_82572_info;
extern struct e1000_info e1000_82573_info;
+extern struct e1000_info e1000_82574_info;
extern struct e1000_info e1000_ich8_info;
extern struct e1000_info e1000_ich9_info;
extern struct e1000_info e1000_ich10_info;
@@ -453,6 +472,8 @@ extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
@@ -523,7 +544,12 @@ static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
return hw->phy.ops.get_phy_info(hw);
}
-extern bool e1000e_check_mng_mode(struct e1000_hw *hw);
+static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
+{
+ return hw->mac.ops.check_mng_mode(hw);
+}
+
+extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index dc552d7..da9c09c 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1247,7 +1247,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
}
static struct e1000_mac_operations es2_mac_ops = {
- .mng_mode_enab = E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT,
+ .check_mng_mode = e1000e_check_mng_mode_generic,
/* check_for_link dependent on media type */
.cleanup_led = e1000e_cleanup_led_generic,
.clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index a89498d..52b762e 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -568,6 +568,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
* and flush shadow RAM for 82573 controllers
*/
if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) ||
+ (hw->mac.type == e1000_82574) ||
(hw->mac.type == e1000_82573)))
e1000e_update_nvm_checksum(hw);
@@ -779,6 +780,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
toggle = 0x7FFFF3FF;
break;
case e1000_82573:
+ case e1000_82574:
case e1000_ich8lan:
case e1000_ich9lan:
case e1000_ich10lan:
@@ -887,10 +889,18 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
u32 shared_int = 1;
u32 irq = adapter->pdev->irq;
int i;
+ int ret_val = 0;
+ int int_mode = E1000E_INT_MODE_LEGACY;
*data = 0;
- /* NOTE: we don't test MSI interrupts here, yet */
+ /* NOTE: we don't test MSI/MSI-X interrupts here, yet */
+ if (adapter->int_mode == E1000E_INT_MODE_MSIX) {
+ int_mode = adapter->int_mode;
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
+ e1000e_set_interrupt_capability(adapter);
+ }
/* Hook up test interrupt handler just for this test */
if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
netdev)) {
@@ -898,7 +908,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
} else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
netdev->name, netdev)) {
*data = 1;
- return -1;
+ ret_val = -1;
+ goto out;
}
e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
@@ -988,7 +999,14 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Unhook test interrupt handler */
free_irq(irq, netdev);
- return *data;
+out:
+ if (int_mode == E1000E_INT_MODE_MSIX) {
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = int_mode;
+ e1000e_set_interrupt_capability(adapter);
+ }
+
+ return ret_val;
}
static void e1000_free_desc_rings(struct e1000_adapter *adapter)
@@ -1769,11 +1787,13 @@ static void e1000_led_blink_callback(unsigned long data)
static int e1000_phys_id(struct net_device *netdev, u32 data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
if (!data)
data = INT_MAX;
- if (adapter->hw.phy.type == e1000_phy_ife) {
+ if ((hw->phy.type == e1000_phy_ife) ||
+ (hw->mac.type == e1000_82574)) {
if (!adapter->blink_timer.function) {
init_timer(&adapter->blink_timer);
adapter->blink_timer.function =
@@ -1783,16 +1803,16 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
mod_timer(&adapter->blink_timer, jiffies);
msleep_interruptible(data * 1000);
del_timer_sync(&adapter->blink_timer);
- e1e_wphy(&adapter->hw,
- IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ if (hw->phy.type == e1000_phy_ife)
+ e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
} else {
- e1000e_blink_led(&adapter->hw);
+ e1000e_blink_led(hw);
msleep_interruptible(data * 1000);
}
- adapter->hw.mac.ops.led_off(&adapter->hw);
+ hw->mac.ops.led_off(hw);
clear_bit(E1000_LED_ON, &adapter->led_status);
- adapter->hw.mac.ops.cleanup_led(&adapter->hw);
+ hw->mac.ops.cleanup_led(hw);
return 0;
}
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 5d2acc5..f66ed37 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -65,7 +65,11 @@ enum e1e_registers {
E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */
E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */
E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */
+ E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */
E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */
+ E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */
+ E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
+#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
E1000_RCTL = 0x00100, /* Rx Control - RW */
E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */
E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */
@@ -332,6 +336,7 @@ enum e1e_registers {
#define E1000_DEV_ID_82573E 0x108B
#define E1000_DEV_ID_82573E_IAMT 0x108C
#define E1000_DEV_ID_82573L 0x109A
+#define E1000_DEV_ID_82574L 0x10D3
#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
@@ -360,12 +365,15 @@ enum e1e_registers {
#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE
#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF
+#define E1000_REVISION_4 4
+
#define E1000_FUNC_1 1
enum e1000_mac_type {
e1000_82571,
e1000_82572,
e1000_82573,
+ e1000_82574,
e1000_80003es2lan,
e1000_ich8lan,
e1000_ich9lan,
@@ -700,8 +708,7 @@ struct e1000_host_mng_command_info {
/* Function pointers and static data for the MAC. */
struct e1000_mac_operations {
- u32 mng_mode_enab;
-
+ bool (*check_mng_mode)(struct e1000_hw *);
s32 (*check_for_link)(struct e1000_hw *);
s32 (*cleanup_led)(struct e1000_hw *);
void (*clear_hw_cntrs)(struct e1000_hw *);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 0e76bb0..019b9c0 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -422,6 +422,22 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
}
/**
+ * e1000_check_mng_mode_ich8lan - Checks management mode
+ * @hw: pointer to the HW structure
+ *
+ * This checks if the adapter has manageability enabled.
+ * This is a function pointer entry point only called by read/write
+ * routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
+{
+ u32 fwsm = er32(FWSM);
+
+ return (fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+}
+
+/**
* e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
* @hw: pointer to the HW structure
*
@@ -2400,7 +2416,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
}
static struct e1000_mac_operations ich8_mac_ops = {
- .mng_mode_enab = E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT,
+ .check_mng_mode = e1000_check_mng_mode_ich8lan,
.check_for_link = e1000e_check_for_copper_link,
.cleanup_led = e1000_cleanup_led_ich8lan,
.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index f1f4e9d..c733730 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -2222,17 +2222,18 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
}
/**
- * e1000e_check_mng_mode - check management mode
+ * e1000e_check_mng_mode_generic - check management mode
* @hw: pointer to the HW structure
*
* Reads the firmware semaphore register and returns true (>0) if
* manageability is enabled, else false (0).
**/
-bool e1000e_check_mng_mode(struct e1000_hw *hw)
+bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
{
u32 fwsm = er32(FWSM);
- return (fwsm & E1000_FWSM_MODE_MASK) == hw->mac.ops.mng_mode_enab;
+ return (fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
}
/**
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 2d9bcb0..0925204 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -55,6 +55,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
[board_82571] = &e1000_82571_info,
[board_82572] = &e1000_82572_info,
[board_82573] = &e1000_82573_info,
+ [board_82574] = &e1000_82574_info,
[board_80003es2lan] = &e1000_es2_info,
[board_ich8lan] = &e1000_ich8_info,
[board_ich9lan] = &e1000_ich9_info,
@@ -1180,8 +1181,8 @@ static irqreturn_t e1000_intr(int irq, void *data)
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
-
u32 rctl, icr = er32(ICR);
+
if (!icr)
return IRQ_NONE; /* Not our interrupt */
@@ -1237,6 +1238,263 @@ static irqreturn_t e1000_intr(int irq, void *data)
return IRQ_HANDLED;
}
+static irqreturn_t e1000_msix_other(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ if (!(icr & E1000_ICR_INT_ASSERTED)) {
+ ew32(IMS, E1000_IMS_OTHER);
+ return IRQ_NONE;
+ }
+
+ if (icr & adapter->eiac_mask)
+ ew32(ICS, (icr & adapter->eiac_mask));
+
+ if (icr & E1000_ICR_OTHER) {
+ if (!(icr & E1000_ICR_LSC))
+ goto no_link_interrupt;
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+no_link_interrupt:
+ ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+
+
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+
+ if (!e1000_clean_tx_irq(adapter))
+ /* Ring was not completely cleaned, so fire another interrupt */
+ ew32(ICS, tx_ring->ims_val);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Write the ITR value calculated at the end of the
+ * previous interrupt.
+ */
+ if (adapter->rx_ring->set_itr) {
+ writel(1000000000 / (adapter->rx_ring->itr_val * 256),
+ adapter->hw.hw_addr + adapter->rx_ring->itr_register);
+ adapter->rx_ring->set_itr = 0;
+ }
+
+ if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __netif_rx_schedule(netdev, &adapter->napi);
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_configure_msix - Configure MSI-X hardware
+ *
+ * e1000_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void e1000_configure_msix(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ int vector = 0;
+ u32 ctrl_ext, ivar = 0;
+
+ adapter->eiac_mask = 0;
+
+ /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
+ if (hw->mac.type == e1000_82574) {
+ u32 rfctl = er32(RFCTL);
+ rfctl |= E1000_RFCTL_ACK_DIS;
+ ew32(RFCTL, rfctl);
+ }
+
+#define E1000_IVAR_INT_ALLOC_VALID 0x8
+ /* Configure Rx vector */
+ rx_ring->ims_val = E1000_IMS_RXQ0;
+ adapter->eiac_mask |= rx_ring->ims_val;
+ if (rx_ring->itr_val)
+ writel(1000000000 / (rx_ring->itr_val * 256),
+ hw->hw_addr + rx_ring->itr_register);
+ else
+ writel(1, hw->hw_addr + rx_ring->itr_register);
+ ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
+
+ /* Configure Tx vector */
+ tx_ring->ims_val = E1000_IMS_TXQ0;
+ vector++;
+ if (tx_ring->itr_val)
+ writel(1000000000 / (tx_ring->itr_val * 256),
+ hw->hw_addr + tx_ring->itr_register);
+ else
+ writel(1, hw->hw_addr + tx_ring->itr_register);
+ adapter->eiac_mask |= tx_ring->ims_val;
+ ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
+
+ /* set vector for Other Causes, e.g. link changes */
+ vector++;
+ ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
+ if (rx_ring->itr_val)
+ writel(1000000000 / (rx_ring->itr_val * 256),
+ hw->hw_addr + E1000_EITR_82574(vector));
+ else
+ writel(1, hw->hw_addr + E1000_EITR_82574(vector));
+
+ /* Cause Tx interrupts on every write back */
+ ivar |= (1 << 31);
+
+ ew32(IVAR, ivar);
+
+ /* enable MSI-X PBA support */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
+
+ /* Auto-Mask Other interrupts upon ICR read */
+#define E1000_EIAC_MASK_82574 0x01F00000
+ ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
+ ctrl_ext |= E1000_CTRL_EXT_EIAME;
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+}
+
+void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->flags & FLAG_MSI_ENABLED) {
+ pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~FLAG_MSI_ENABLED;
+ }
+
+ return;
+}
+
+/**
+ * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
+{
+ int err;
+ int numvecs, i;
+
+
+ switch (adapter->int_mode) {
+ case E1000E_INT_MODE_MSIX:
+ if (adapter->flags & FLAG_HAS_MSIX) {
+ numvecs = 3; /* RxQ0, TxQ0 and other */
+ adapter->msix_entries = kcalloc(numvecs,
+ sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (adapter->msix_entries) {
+ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev,
+ adapter->msix_entries,
+ numvecs);
+ if (err == 0)
+ return;
+ }
+ /* MSI-X failed, so fall through and try MSI */
+ e_err("Failed to initialize MSI-X interrupts. "
+ "Falling back to MSI interrupts.\n");
+ e1000e_reset_interrupt_capability(adapter);
+ }
+ adapter->int_mode = E1000E_INT_MODE_MSI;
+ /* Fall through */
+ case E1000E_INT_MODE_MSI:
+ if (!pci_enable_msi(adapter->pdev)) {
+ adapter->flags |= FLAG_MSI_ENABLED;
+ } else {
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
+ e_err("Failed to initialize MSI interrupts. Falling "
+ "back to legacy interrupts.\n");
+ }
+ /* Fall through */
+ case E1000E_INT_MODE_LEGACY:
+ /* Don't do anything; this is the system default */
+ break;
+ }
+
+ return;
+}
+
+/**
+ * e1000_request_msix - Initialize MSI-X interrupts
+ *
+ * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int e1000_request_msix(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err = 0, vector = 0;
+
+ if (strlen(netdev->name) < (IFNAMSIZ - 5))
+ sprintf(adapter->rx_ring->name, "%s-rx0", netdev->name);
+ else
+ memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &e1000_intr_msix_rx, 0, adapter->rx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+ adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
+ adapter->rx_ring->itr_val = adapter->itr;
+ vector++;
+
+ if (strlen(netdev->name) < (IFNAMSIZ - 5))
+ sprintf(adapter->tx_ring->name, "%s-tx0", netdev->name);
+ else
+ memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &e1000_intr_msix_tx, 0, adapter->tx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+ adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
+ adapter->tx_ring->itr_val = adapter->itr;
+ vector++;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &e1000_msix_other, 0, netdev->name, netdev);
+ if (err)
+ goto out;
+
+ e1000_configure_msix(adapter);
+ return 0;
+out:
+ return err;
+}
+
/**
* e1000_request_irq - initialize interrupts
*
@@ -1246,29 +1504,33 @@ static irqreturn_t e1000_intr(int irq, void *data)
static int e1000_request_irq(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- int irq_flags = IRQF_SHARED;
int err;
- if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) {
- err = pci_enable_msi(adapter->pdev);
- if (!err) {
- adapter->flags |= FLAG_MSI_ENABLED;
- irq_flags = 0;
- }
+ if (adapter->msix_entries) {
+ err = e1000_request_msix(adapter);
+ if (!err)
+ return err;
+ /* fall back to MSI */
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_MSI;
+ e1000e_set_interrupt_capability(adapter);
}
+ if (adapter->flags & FLAG_MSI_ENABLED) {
+ err = request_irq(adapter->pdev->irq, &e1000_intr_msi, 0,
+ netdev->name, netdev);
+ if (!err)
+ return err;
- err = request_irq(adapter->pdev->irq,
- ((adapter->flags & FLAG_MSI_ENABLED) ?
- &e1000_intr_msi : &e1000_intr),
- irq_flags, netdev->name, netdev);
- if (err) {
- if (adapter->flags & FLAG_MSI_ENABLED) {
- pci_disable_msi(adapter->pdev);
- adapter->flags &= ~FLAG_MSI_ENABLED;
- }
- e_err("Unable to allocate interrupt, Error: %d\n", err);
+ /* fall back to legacy interrupt */
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
}
+ err = request_irq(adapter->pdev->irq, &e1000_intr, IRQF_SHARED,
+ netdev->name, netdev);
+ if (err)
+ e_err("Unable to allocate interrupt, Error: %d\n", err);
+
return err;
}
@@ -1276,11 +1538,21 @@ static void e1000_free_irq(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- free_irq(adapter->pdev->irq, netdev);
- if (adapter->flags & FLAG_MSI_ENABLED) {
- pci_disable_msi(adapter->pdev);
- adapter->flags &= ~FLAG_MSI_ENABLED;
+ if (adapter->msix_entries) {
+ int vector = 0;
+
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ vector++;
+
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ vector++;
+
+ /* Other Causes interrupt vector */
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ return;
}
+
+ free_irq(adapter->pdev->irq, netdev);
}
/**
@@ -1291,6 +1563,8 @@ static void e1000_irq_disable(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
ew32(IMC, ~0);
+ if (adapter->msix_entries)
+ ew32(EIAC_82574, 0);
e1e_flush();
synchronize_irq(adapter->pdev->irq);
}
@@ -1302,7 +1576,12 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- ew32(IMS, IMS_ENABLE_MASK);
+ if (adapter->msix_entries) {
+ ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+ } else {
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
e1e_flush();
}
@@ -1552,9 +1831,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
* traffic pattern. Constants in this function were computed
* based on theoretical maximum wire speed and thresholds were set based
* on testing data as well as attempting to minimize response time
- * while increasing bulk throughput.
- * this functionality is controlled by the InterruptThrottleRate module
- * parameter (see e1000_param.c)
+ * while increasing bulk throughput. This functionality is controlled
+ * by the InterruptThrottleRate module parameter.
**/
static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
u16 itr_setting, int packets,
@@ -1662,11 +1940,37 @@ set_itr_now:
min(adapter->itr + (new_itr >> 2), new_itr) :
new_itr;
adapter->itr = new_itr;
- ew32(ITR, 1000000000 / (new_itr * 256));
+ adapter->rx_ring->itr_val = new_itr;
+ if (adapter->msix_entries)
+ adapter->rx_ring->set_itr = 1;
+ else
+ ew32(ITR, 1000000000 / (new_itr * 256));
}
}
/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ **/
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ goto err;
+
+ adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
+ if (!adapter->rx_ring)
+ goto err;
+
+ return 0;
+err:
+ e_err("Unable to allocate memory for queues\n");
+ kfree(adapter->rx_ring);
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+}
+
+/**
* e1000_clean - NAPI Rx polling callback
* @napi: struct associated with this polling callback
* @budget: amount of packets driver is allowed to process this poll
@@ -1674,12 +1978,17 @@ set_itr_now:
static int e1000_clean(struct napi_struct *napi, int budget)
{
struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
int tx_cleaned = 0, work_done = 0;
/* Must NOT use netdev_priv macro here. */
adapter = poll_dev->priv;
+ if (adapter->msix_entries &&
+ !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
+ goto clean_rx;
+
/*
* e1000_clean is called per-cpu. This lock protects
* tx_ring from being cleaned by multiple cpus
@@ -1691,6 +2000,7 @@ static int e1000_clean(struct napi_struct *napi, int budget)
spin_unlock(&adapter->tx_queue_lock);
}
+clean_rx:
adapter->clean_rx(adapter, &work_done, budget);
if (tx_cleaned)
@@ -1701,7 +2011,10 @@ static int e1000_clean(struct napi_struct *napi, int budget)
if (adapter->itr_setting & 3)
e1000_set_itr(adapter);
netif_rx_complete(poll_dev, napi);
- e1000_irq_enable(adapter);
+ if (adapter->msix_entries)
+ ew32(IMS, adapter->rx_ring->ims_val);
+ else
+ e1000_irq_enable(adapter);
}
return work_done;
@@ -2497,6 +2810,8 @@ int e1000e_up(struct e1000_adapter *adapter)
clear_bit(__E1000_DOWN, &adapter->state);
napi_enable(&adapter->napi);
+ if (adapter->msix_entries)
+ e1000_configure_msix(adapter);
e1000_irq_enable(adapter);
/* fire a link change interrupt to start the watchdog */
@@ -2580,13 +2895,10 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
- adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
- if (!adapter->tx_ring)
- goto err;
+ e1000e_set_interrupt_capability(adapter);
- adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
- if (!adapter->rx_ring)
- goto err;
+ if (e1000_alloc_queues(adapter))
+ return -ENOMEM;
spin_lock_init(&adapter->tx_queue_lock);
@@ -2597,12 +2909,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
set_bit(__E1000_DOWN, &adapter->state);
return 0;
-
-err:
- e_err("Unable to allocate memory for queues\n");
- kfree(adapter->rx_ring);
- kfree(adapter->tx_ring);
- return -ENOMEM;
}
/**
@@ -2644,6 +2950,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
/* free the real vector and request a test handler */
e1000_free_irq(adapter);
+ e1000e_reset_interrupt_capability(adapter);
/* Assume that the test fails, if it succeeds then the test
* MSI irq handler will unset this flag */
@@ -2674,6 +2981,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
rmb();
if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
err = -EIO;
e_info("MSI interrupt test failed!\n");
}
@@ -2687,7 +2995,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
/* okay so the test worked, restore settings */
e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
msi_test_failed:
- /* restore the original vector, even if it failed */
+ e1000e_set_interrupt_capability(adapter);
e1000_request_irq(adapter);
return err;
}
@@ -2797,7 +3105,7 @@ static int e1000_open(struct net_device *netdev)
* ignore e1000e MSI messages, which means we need to test our MSI
* interrupt now
*/
- {
+ if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
err = e1000_test_msi(adapter);
if (err) {
e_err("Interrupt allocation failed\n");
@@ -2989,7 +3297,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
adapter->stats.algnerrc += er32(ALGNERRC);
adapter->stats.rxerrc += er32(RXERRC);
- adapter->stats.tncrs += er32(TNCRS);
+ if (hw->mac.type != e1000_82574)
+ adapter->stats.tncrs += er32(TNCRS);
adapter->stats.cexterr += er32(CEXTERR);
adapter->stats.tsctc += er32(TSCTC);
adapter->stats.tsctfc += er32(TSCTFC);
@@ -3337,7 +3646,10 @@ link_up:
}
/* Cause software interrupt to ensure Rx ring is cleaned */
- ew32(ICS, E1000_ICS_RXDMT0);
+ if (adapter->msix_entries)
+ ew32(ICS, adapter->rx_ring->ims_val);
+ else
+ ew32(ICS, E1000_ICS_RXDMT0);
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = 1;
@@ -4054,6 +4366,7 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
e1000e_down(adapter);
e1000_free_irq(adapter);
}
+ e1000e_reset_interrupt_capability(adapter);
retval = pci_save_state(pdev);
if (retval)
@@ -4180,6 +4493,7 @@ static int e1000_resume(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
+ e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
err = e1000_request_irq(adapter);
if (err)
@@ -4489,6 +4803,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->bd_number = cards_found++;
+ e1000e_check_options(adapter);
+
/* setup adapter struct */
err = e1000_sw_init(adapter);
if (err)
@@ -4595,8 +4911,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
INIT_WORK(&adapter->reset_task, e1000_reset_task);
INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
- e1000e_check_options(adapter);
-
/* Initialize link parameters. User can change them with ethtool */
adapter->hw.mac.autoneg = 1;
adapter->fc_autoneg = 1;
@@ -4726,6 +5040,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
if (!e1000_check_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
+ e1000e_reset_interrupt_capability(adapter);
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
@@ -4767,6 +5082,8 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
+
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
board_80003es2lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index ed912e0..f46db6c 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -114,6 +114,15 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define DEFAULT_ITR 3
#define MAX_ITR 100000
#define MIN_ITR 100
+/* IntMode (Interrupt Mode)
+ *
+ * Valid Range: 0 - 2
+ *
+ * Default Value: 2 (MSI-X)
+ */
+E1000_PARAM(IntMode, "Interrupt Mode");
+#define MAX_INTMODE 2
+#define MIN_INTMODE 0
/*
* Enable Smart Power Down of the PHY
@@ -352,6 +361,24 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
adapter->itr = 20000;
}
}
+ { /* Interrupt Mode */
+ struct e1000_option opt = {
+ .type = range_option,
+ .name = "Interrupt Mode",
+ .err = "defaulting to 2 (MSI-X)",
+ .def = E1000E_INT_MODE_MSIX,
+ .arg = { .r = { .min = MIN_INTMODE,
+ .max = MAX_INTMODE } }
+ };
+
+ if (num_IntMode > bd) {
+ unsigned int int_mode = IntMode[bd];
+ e1000_validate_option(&int_mode, &opt, adapter);
+ adapter->int_mode = int_mode;
+ } else {
+ adapter->int_mode = opt.def;
+ }
+ }
{ /* Smart Power Down */
const struct e1000_option opt = {
.type = enable_option,
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 16724f8..6cd333a 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -476,7 +476,9 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- if ((phy->type == e1000_phy_m88) && (phy->revision < 4)) {
+ if ((phy->type == e1000_phy_m88) &&
+ (phy->revision < E1000_REVISION_4) &&
+ (phy->id != BME1000_E_PHY_ID_R2)) {
/*
* Force TX_CLK in the Extended PHY Specific Control Register
* to 25MHz clock.
@@ -504,6 +506,18 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
return ret_val;
}
+ if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) {
+ /* Set PHY page 0, register 29 to 0x0003 */
+ ret_val = e1e_wphy(hw, 29, 0x0003);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY page 0, register 30 to 0x0000 */
+ ret_val = e1e_wphy(hw, 30, 0x0000);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Commit the changes. */
ret_val = e1000e_commit_phy(hw);
if (ret_val)
@@ -2054,6 +2068,99 @@ out:
}
/**
+ * e1000e_read_phy_reg_bm2 - Read BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+ true);
+ return ret_val;
+ }
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy.addr = 1;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+ page);
+
+ if (ret_val) {
+ hw->phy.ops.release_phy(hw);
+ return ret_val;
+ }
+ }
+
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+ hw->phy.ops.release_phy(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000e_write_phy_reg_bm2 - Write BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+ false);
+ return ret_val;
+ }
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy.addr = 1;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+ page);
+
+ if (ret_val) {
+ hw->phy.ops.release_phy(hw);
+ return ret_val;
+ }
+ }
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release_phy(hw);
+
+ return ret_val;
+}
+
+/**
* e1000_access_phy_wakeup_reg_bm - Read BM PHY wakeup register
* @hw: pointer to the HW structure
* @offset: register offset to be read or written
--
1.5.4.1
linux-2.6-e1000e-add-support-for-the-82567LM-4-device.patch:
--- NEW FILE linux-2.6-e1000e-add-support-for-the-82567LM-4-device.patch ---
>From 2f15f9d60190a62bc8ac50fa84fea31fc0b00ecf Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan at intel.com>
Date: Tue, 26 Aug 2008 18:36:36 -0700
Subject: [PATCH 1/3] e1000e: add support for the 82567LM-4 device
Enable PCI device ID for a new combination of MAC and PHY already supported
in the driver.
Signed-off-by: Bruce Allan <bruce.w.allan at intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher at intel.com>
Signed-off-by: Jeff Garzik <jgarzik at redhat.com>
---
drivers/net/e1000e/hw.h | 1 +
drivers/net/e1000e/ich8lan.c | 1 +
drivers/net/e1000e/netdev.c | 1 +
3 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 74f263a..d0e7b46 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -346,6 +346,7 @@ enum e1e_registers {
#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
#define E1000_DEV_ID_ICH8_IGP_M 0x104D
#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
+#define E1000_DEV_ID_ICH9_BM 0x10E5
#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
#define E1000_DEV_ID_ICH9_IGP_M 0x10BF
#define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e38452..b5fc2c9 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -44,6 +44,7 @@
* 82567LF-2 Gigabit Network Connection
* 82567V-2 Gigabit Network Connection
* 82562GT-3 10/100 Network Connection
+ * 82567LM-4 Gigabit Network Connection
*/
#include <linux/netdevice.h>
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d266510..c3d7411 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4767,6 +4767,7 @@ static struct pci_device_id e1000_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
--
1.5.4.1
Index: kernel.spec
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/devel/kernel.spec,v
retrieving revision 1.944
retrieving revision 1.945
diff -u -r1.944 -r1.945
--- kernel.spec 10 Sep 2008 04:54:35 -0000 1.944
+++ kernel.spec 10 Sep 2008 16:59:58 -0000 1.945
@@ -613,6 +613,11 @@
# kludge to make ich9 e1000 work
Patch2000: linux-2.6-e1000-ich9.patch
+# new e1000e hardware support from net-next-2.6 (e.g. ich10)
+Patch2001: linux-2.6-e1000e-add-support-for-the-82567LM-4-device.patch
+Patch2002: linux-2.6-e1000e-add-support-for-82567LM-3-and-82567LF-3-ICH10D-parts.patch
+Patch2003: linux-2.6-e1000e-add-support-for-new-82574L-part.patch
+
# Make Eee disk faster.
Patch2010: linux-2.6-sata-eeepc-faster.patch
@@ -1145,6 +1150,10 @@
ApplyPatch linux-2.6-e1000-ich9.patch
+ApplyPatch linux-2.6-e1000e-add-support-for-the-82567LM-4-device.patch
+ApplyPatch linux-2.6-e1000e-add-support-for-82567LM-3-and-82567LF-3-ICH10D-parts.patch
+ApplyPatch linux-2.6-e1000e-add-support-for-new-82574L-part.patch
+
ApplyPatch linux-2.6-sata-eeepc-faster.patch
ApplyPatch linux-2.6-eeepc-laptop-update.patch
@@ -1746,6 +1755,9 @@
%kernel_variant_files -k vmlinux %{with_kdump} kdump
%changelog
+* Wed Sep 10 2008 Mark McLoughlin <markmc at redhat.com>
+- Pull in new e1000e hardware support (e.g. ich10) from net-next-2.6
+
* Tue Sep 09 2008 Dave Airlie <airlied at redhat.com>
- Update radeon modesetting - memory setup + ref count fail
- Previous message (by thread): rpms/dap-netcdf_handler/devel .cvsignore, 1.8, 1.9 dap-netcdf_handler.spec, 1.17, 1.18 sources, 1.8, 1.9
- Next message (by thread): rpms/dap-hdf4_handler/devel hdf4_handler-3.7.9-gcc43.patch, NONE, 1.1 .cvsignore, 1.7, 1.8 dap-hdf4_handler.spec, 1.20, 1.21 sources, 1.7, 1.8 dap-hdf4_handler-3.7.7-open.patch, 1.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the fedora-extras-commits
mailing list