rpms/vim/devel 7.2.137,NONE,1.1
Karsten Hopp
karsten at fedoraproject.org
Fri Mar 27 11:30:54 UTC 2009
Author: karsten
Update of /cvs/extras/rpms/vim/devel
In directory cvs1.fedora.phx.redhat.com:/tmp/cvs-serv12183
Added Files:
7.2.137
Log Message:
- patchlevel 137
--- NEW FILE 7.2.137 ---
To: vim-dev at vim.org
Subject: Patch 7.2.137
Fcc: outbox
From: Bram Moolenaar <Bram at moolenaar.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
------------
Note: The special characters in the patch may cause problems.
Patch 7.2.137
Problem: When 'virtualedit' is set, a left shift of a blockwise selection
that starts and ends inside a tab shifts too much. (Helmut
Stiegler)
Solution: Redo the block left shift code. (Lech Lorens)
Files: src/ops.c, src/testdir/Makefile, src/testdir/test66.in,
src/testdir/test66.ok
*** ../vim-7.2.136/src/ops.c Wed Dec 3 13:38:00 2008
--- src/ops.c Thu Mar 5 04:47:09 2009
***************
*** 72,82 ****
*/
struct block_def
{
! int startspaces; /* 'extra' cols of first char */
! int endspaces; /* 'extra' cols of first char */
int textlen; /* chars in block */
! char_u *textstart; /* pointer to 1st char in block */
! colnr_T textcol; /* cols of chars (at least part.) in block */
colnr_T start_vcol; /* start col of 1st char wholly inside block */
colnr_T end_vcol; /* start col of 1st char wholly after block */
#ifdef FEAT_VISUALEXTRA
--- 72,82 ----
*/
struct block_def
{
! int startspaces; /* 'extra' cols before first char */
! int endspaces; /* 'extra' cols after last char */
int textlen; /* chars in block */
! char_u *textstart; /* pointer to 1st char (partially) in block */
! colnr_T textcol; /* index of chars (partially) in block */
colnr_T start_vcol; /* start col of 1st char wholly inside block */
colnr_T end_vcol; /* start col of 1st char wholly after block */
#ifdef FEAT_VISUALEXTRA
***************
*** 382,396 ****
{
int left = (oap->op_type == OP_LSHIFT);
int oldstate = State;
! int total, split;
! char_u *newp, *oldp, *midp, *ptr;
int oldcol = curwin->w_cursor.col;
int p_sw = (int)curbuf->b_p_sw;
int p_ts = (int)curbuf->b_p_ts;
struct block_def bd;
- int internal = 0;
int incr;
! colnr_T vcol, col = 0, ws_vcol;
int i = 0, j = 0;
int len;
--- 382,395 ----
{
int left = (oap->op_type == OP_LSHIFT);
int oldstate = State;
! int total;
! char_u *newp, *oldp;
int oldcol = curwin->w_cursor.col;
int p_sw = (int)curbuf->b_p_sw;
int p_ts = (int)curbuf->b_p_ts;
struct block_def bd;
int incr;
! colnr_T ws_vcol;
int i = 0, j = 0;
int len;
***************
*** 456,522 ****
}
else /* left */
{
! vcol = oap->start_vcol;
! /* walk vcol past ws to be removed */
! for (midp = oldp + bd.textcol;
! vcol < (oap->start_vcol + total) && vim_iswhite(*midp); )
! {
! incr = lbr_chartabsize_adv(&midp, (colnr_T)vcol);
! vcol += incr;
! }
! /* internal is the block-internal ws replacing a split TAB */
! if (vcol > (oap->start_vcol + total))
! {
! /* we have to split the TAB *(midp-1) */
! internal = vcol - (oap->start_vcol + total);
! }
! /* if 'expandtab' is not set, use TABs */
! split = bd.startspaces + internal;
! if (split > 0)
! {
! if (!curbuf->b_p_et)
! {
! for (ptr = oldp, col = 0; ptr < oldp+bd.textcol; )
! col += lbr_chartabsize_adv(&ptr, (colnr_T)col);
! /* col+1 now equals the start col of the first char of the
! * block (may be < oap.start_vcol if we're splitting a TAB) */
! i = ((col % p_ts) + split) / p_ts; /* number of tabs */
! }
! if (i)
! j = ((col % p_ts) + split) % p_ts; /* number of spp */
! else
! j = split;
! }
! newp = alloc_check(bd.textcol + i + j + (unsigned)STRLEN(midp) + 1);
! if (newp == NULL)
! return;
! vim_memset(newp, NUL, (size_t)(bd.textcol + i + j + STRLEN(midp) + 1));
! /* copy first part we want to keep */
! mch_memmove(newp, oldp, (size_t)bd.textcol);
! /* Now copy any TABS and spp to ensure correct alignment! */
! while (vim_iswhite(*midp))
{
! if (*midp == TAB)
! i++;
! else /*space */
! j++;
! midp++;
}
! /* We might have an extra TAB worth of spp now! */
! if (j / p_ts && !curbuf->b_p_et)
{
! i++;
! j -= p_ts;
}
- copy_chars(newp + bd.textcol, (size_t)i, TAB);
- copy_spaces(newp + bd.textcol + i, (size_t)j);
! /* the end */
! STRMOVE(newp + STRLEN(newp), midp);
}
/* replace the line */
ml_replace(curwin->w_cursor.lnum, newp, FALSE);
--- 455,543 ----
}
else /* left */
{
! colnr_T destination_col; /* column to which text in block will
! be shifted */
! char_u *verbatim_copy_end; /* end of the part of the line which is
! copied verbatim */
! colnr_T verbatim_copy_width;/* the (displayed) width of this part
! of line */
! unsigned fill; /* nr of spaces that replace a TAB */
! unsigned new_line_len; /* the length of the line after the
! block shift */
! size_t block_space_width;
! size_t shift_amount;
! char_u *non_white = bd.textstart;
! colnr_T non_white_col;
! /*
! * Firstly, let's find the first non-whitespace character that is
! * displayed after the block's start column and the character's column
! * number. Also, let's calculate the width of all the whitespace
! * characters that are displayed in the block and precede the searched
! * non-whitespace character.
! */
! /* If "bd.startspaces" is set, "bd.textstart" points to the character,
! * the part of which is displayed at the block's beginning. Let's start
! * searching from the next character. */
! if (bd.startspaces)
! mb_ptr_adv(non_white);
! /* The character's column is in "bd.start_vcol". */
! non_white_col = bd.start_vcol;
! while (vim_iswhite(*non_white))
{
! incr = lbr_chartabsize_adv(&non_white, non_white_col);
! non_white_col += incr;
}
!
! block_space_width = non_white_col - oap->start_vcol;
! /* We will shift by "total" or "block_space_width", whichever is less.
! */
! shift_amount = (block_space_width < total? block_space_width: total);
!
! /* The column to which we will shift the text. */
! destination_col = non_white_col - shift_amount;
!
! /* Now let's find out how much of the beginning of the line we can
! * reuse without modification. */
! verbatim_copy_end = bd.textstart;
! verbatim_copy_width = bd.start_vcol;
!
! /* If "bd.startspaces" is set, "bd.textstart" points to the character
! * preceding the block. We have to subtract its width to obtain its
! * column number. */
! if (bd.startspaces)
! verbatim_copy_width -= bd.start_char_vcols;
! while (verbatim_copy_width < destination_col)
{
! incr = lbr_chartabsize(verbatim_copy_end, verbatim_copy_width);
! if (verbatim_copy_width + incr > destination_col)
! break;
! verbatim_copy_width += incr;
! mb_ptr_adv(verbatim_copy_end);
}
! /* If "destination_col" is different from the width of the initial
! * part of the line that will be copied, it means we encountered a tab
! * character, which we will have to partly replace with spaces. */
! fill = destination_col - verbatim_copy_width;
!
! /* The replacement line will consist of:
! * - the beginning of the original line up to "verbatim_copy_end",
! * - "fill" number of spaces,
! * - the rest of the line, pointed to by non_white. */
! new_line_len = (unsigned)(verbatim_copy_end - oldp)
! + fill
! + (unsigned)STRLEN(non_white) + 1;
!
! newp = alloc_check(new_line_len);
! if (newp == NULL)
! return;
! mch_memmove(newp, oldp, (size_t)(verbatim_copy_end - oldp));
! copy_spaces(newp + (verbatim_copy_end - oldp), (size_t)fill);
! STRMOVE(newp + (verbatim_copy_end - oldp) + fill, non_white);
}
/* replace the line */
ml_replace(curwin->w_cursor.lnum, newp, FALSE);
***************
*** 4851,4857 ****
* - textlen includes the first/last char to be (partly) deleted
* - start/endspaces is the number of columns that are taken by the
* first/last deleted char minus the number of columns that have to be
! * deleted. for yank and tilde:
* - textlen includes the first/last char to be wholly yanked
* - start/endspaces is the number of columns of the first/last yanked char
* that are to be yanked.
--- 4872,4879 ----
* - textlen includes the first/last char to be (partly) deleted
* - start/endspaces is the number of columns that are taken by the
* first/last deleted char minus the number of columns that have to be
! * deleted.
! * for yank and tilde:
* - textlen includes the first/last char to be wholly yanked
* - start/endspaces is the number of columns of the first/last yanked char
* that are to be yanked.
*** ../vim-7.2.136/src/testdir/Makefile Wed Sep 10 18:25:18 2008
--- src/testdir/Makefile Thu Mar 5 04:53:58 2009
***************
*** 20,26 ****
test48.out test49.out test51.out test52.out test53.out \
test54.out test55.out test56.out test57.out test58.out \
test59.out test60.out test61.out test62.out test63.out \
! test64.out test65.out
SCRIPTS_GUI = test16.out
--- 20,26 ----
test48.out test49.out test51.out test52.out test53.out \
test54.out test55.out test56.out test57.out test58.out \
test59.out test60.out test61.out test62.out test63.out \
! test64.out test65.out test66.out
SCRIPTS_GUI = test16.out
*** ../vim-7.2.136/src/testdir/test66.in Wed Mar 11 16:24:44 2009
--- src/testdir/test66.in Wed Mar 11 11:52:57 2009
***************
*** 0 ****
--- 1,25 ----
+
+ Test for visual block shift and tab characters.
+
+ STARTTEST
+ :so small.vim
+ /^abcdefgh
+ 4jI j<<11|D
+ 7|a
+ 7|a
+ 7|a 4k13|4j<
+ :$-4,$w! test.out
+ :$-4,$s/\s\+//g
+ 4kI j<<
+ 7|a
+ 7|a
+ 7|a 4k13|4j3<
+ :$-4,$w >> test.out
+ :qa!
+ ENDTEST
+
+ abcdefghijklmnopqrstuvwxyz
+ abcdefghijklmnopqrstuvwxyz
+ abcdefghijklmnopqrstuvwxyz
+ abcdefghijklmnopqrstuvwxyz
+ abcdefghijklmnopqrstuvwxyz
*** ../vim-7.2.136/src/testdir/test66.ok Wed Mar 11 16:24:44 2009
--- src/testdir/test66.ok Thu Mar 5 04:39:36 2009
***************
*** 0 ****
--- 1,10 ----
+ abcdefghijklmnopqrstuvwxyz
+ abcdefghij
+ abc defghijklmnopqrstuvwxyz
+ abc defghijklmnopqrstuvwxyz
+ abc defghijklmnopqrstuvwxyz
+ abcdefghijklmnopqrstuvwxyz
+ abcdefghij
+ abc defghijklmnopqrstuvwxyz
+ abc defghijklmnopqrstuvwxyz
+ abc defghijklmnopqrstuvwxyz
*** ../vim-7.2.136/src/version.c Wed Mar 11 15:36:01 2009
--- src/version.c Wed Mar 11 16:23:07 2009
***************
*** 678,679 ****
--- 678,681 ----
{ /* Add new patch number below this line */
+ /**/
+ 137,
/**/
--
% cat /usr/include/sys/errno.h
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
[...]
#define EMACS 666 /* Too many macros */
%
/// Bram Moolenaar -- Bram at Moolenaar.net -- http://www.Moolenaar.net \\\
/// sponsor Vim, vote for features -- http://www.Vim.org/sponsor/ \\\
\\\ download, build and distribute -- http://www.A-A-P.org ///
\\\ help me help AIDS victims -- http://ICCF-Holland.org ///
More information about the fedora-extras-commits
mailing list