Irq11 err messages on IBM Thinkpad x30
jayeola
jayeola at gmail.com
Mon Dec 1 19:04:55 UTC 2008
Chaps,
Haven't supplied a bug yet. The dmesg when this thinkpad boots on FC10.
anything I can do to debug this? Looks like it is not liking the Yenta
CardBus thingie?
/jjm
(/home/jayeola/)
% ssh acid 'dmesg'
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.5-117.fc10.i686 (mockbuild at x86-7.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 12:19:59 EST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f770000 (usable)
BIOS-e820: 000000003f770000 - 000000003f77e000 (ACPI data)
BIOS-e820: 000000003f77e000 - 000000003f780000 (ACPI NVS)
BIOS-e820: 000000003f780000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
last_pfn = 0x3f770 max_arch_pfn = 0x100000
kernel direct mapping tables up to 38000000 @ 7000-c000
Using x86 segment limits to approximate NX protection
RAMDISK: 37d47000 - 37fefeb3
DMI present.
ACPI: RSDP 000F7090, 0024 (r2 IBM )
ACPI: XSDT 3F772A9A, 004C (r1 IBM TP-1K 1050 LTP 0)
ACPI: FACP 3F772B00, 0081 (r1 IBM TP-1K 1050 IBM 1)
ACPI: DSDT 3F772BE7, B208 (r1 IBM TP-1K 1050 MSFT 100000D)
ACPI: FACS 3F77F000, 0040
ACPI: SSDT 3F772BB4, 0033 (r1 IBM TP-1K 1050 MSFT 100000D)
ACPI: ECDT 3F77DDEF, 0052 (r1 IBM TP-1K 1050 IBM 1)
ACPI: TCPA 3F77DE41, 0032 (r1 IBM TP-1K 1050 PTL 1)
ACPI: BOOT 3F77DFD8, 0028 (r1 IBM TP-1K 1050 LTP 1)
119MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00008000 - 0000f000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 000097116c] TEXT DATA BSS ==> [0000400000 - 000097116c]
#4 [0037d47000 - 0037fefeb3] RAMDISK ==> [0037d47000 - 0037fefeb3]
#5 [0000972000 - 0000976000] INIT_PG_TABLE ==> [0000972000 - 0000976000]
#6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003f770
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f770
On node 0 totalpages: 259855
free_area_init_node: node 0, pgdat c07f2900, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 30337 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (017f4000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
PERCPU: Allocating 41372 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257824
Kernel command line: ro root=UUID=e4358c93-8b39-47c0-a746-001394911c14 vga=791
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c089e000 soft=c087e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 1198.975 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1021748k/1039808k available (2732k kernel code, 17332k reserved, 1420k data, 412k init, 122304k highmem)
virtual kernel memory layout:
fixmap : 0xffc57000 - 0xfffff000 (3744 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0814000 - 0xc087b000 ( 412 kB)
.data : 0xc06ab266 - 0xc080e610 (1420 kB)
.text : 0xc0400000 - 0xc06ab266 (2732 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2397.95 BogoMIPS (lpj=1198975)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (2397.95 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3268 bytes
CPU0 attaching sched-domain:
domain 0: span 0 level CPU
groups: 0
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
Time: 5:15:29 Date: 12/01/08
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver
ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Is dependent on dock
ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd90e, last bus=7
PCI: Using configuration type 1 for base access
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [e0000000, e7ffffff]
PCI: 0000:00:02.0 reg 14 32bit mmio: [d0000000, d007ffff]
pci 0000:00:02.0: supports D1
PCI: 0000:00:02.1 reg 10 32bit mmio: [e8000000, efffffff]
PCI: 0000:00:02.1 reg 14 32bit mmio: [d0080000, d00fffff]
pci 0000:00:02.1: supports D1
PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f]
PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f]
PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:1f.1 reg 18 io port: [170, 177]
PCI: 0000:00:1f.1 reg 1c io port: [374, 377]
PCI: 0000:00:1f.1 reg 20 io port: [1860, 186f]
PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
PCI: 0000:00:1f.3 reg 20 io port: [1880, 189f]
PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff]
PCI: 0000:00:1f.5 reg 14 io port: [18c0, 18ff]
PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff]
PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [50000000, 50000fff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
PCI: 0000:01:00.1 reg 10 32bit mmio: [50100000, 50100fff]
pci 0000:01:00.1: supports D1
pci 0000:01:00.1: supports D2
pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.1: PME# disabled
PCI: 0000:01:00.2 reg 10 32bit mmio: [d0201000, d02017ff]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
PCI: 0000:01:08.0 reg 10 32bit mmio: [d0200000, d0200fff]
PCI: 0000:01:08.0 reg 14 io port: [7000, 703f]
pci 0000:01:08.0: supports D1
pci 0000:01:08.0: supports D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [3000, 7fff]
PCI: bridge 0000:00:1e.0 32bit mmio: [d0200000, dfffffff]
PCI: bridge 0000:00:1e.0 32bit mmio pref: [f0000000, f7ffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
pci 0000:01:00.0: CardBus bridge, secondary bus 0000:02
pci 0000:01:00.0: IO window: 0x003000-0x0030ff
pci 0000:01:00.0: IO window: 0x003400-0x0034ff
pci 0000:01:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:01:00.0: MEM window: 0xd4000000-0xd7ffffff
pci 0000:01:00.1: CardBus bridge, secondary bus 0000:06
pci 0000:01:00.1: IO window: 0x003800-0x0038ff
pci 0000:01:00.1: IO window: 0x003c00-0x003cff
pci 0000:01:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:01:00.1: MEM window: 0xd8000000-0xdbffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0x3000-0x7fff
pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:01:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [3000, 7fff]
bus: 01 index 1 mmio: [d0200000, dfffffff]
bus: 01 index 2 mmio: [f0000000, f7ffffff]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffffffffffff]
bus: 02 index 0 io port: [3000, 30ff]
bus: 02 index 1 io port: [3400, 34ff]
bus: 02 index 2 mmio: [f0000000, f3ffffff]
bus: 02 index 3 mmio: [d4000000, d7ffffff]
bus: 06 index 0 io port: [3800, 38ff]
bus: 06 index 1 io port: [3c00, 3cff]
bus: 06 index 2 mmio: [f4000000, f7ffffff]
bus: 06 index 3 mmio: [d8000000, dbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 2723k freed
Simple Boot Flag at 0x35 set to 0x1
speedstep: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of 500000 nSec.
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1228108528.617:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1762
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3072k, total 8000k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Switched to high resolution mode on CPU 0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (49 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: detected 8060K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial 00:09: activated
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata1.00: ATA-7: SAMSUNG HM120JC, YL100-19, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM120JC YL10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 4:358:263
Freeing unused kernel memory: 412k freed
Write protecting the kernel text: 2736k
Write protecting the kernel read-only data: 1172k
Marking TSC unstable due to TSC halts in idle
psmouse serio1: ID: 10 00 64<6>IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
Clocksource tsc unstable (delta = -74082079 ns)
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 555, comm: nash-hotplug Not tainted 2.6.27.5-117.fc10.i686 #1
[<c0463984>] __report_bad_irq+0x2e/0x6f
[<c0463b93>] note_interrupt+0x1ce/0x223
[<c0463104>] ? handle_IRQ_event+0x5c/0x64
[<c0464203>] handle_level_irq+0x88/0xbe
[<c046417b>] ? handle_level_irq+0x0/0xbe
[<c0405e3e>] do_IRQ+0xc7/0xfe
[<c0404654>] common_interrupt+0x28/0x30
[<c0430751>] ? __do_softirq+0x66/0x109
[<c04306eb>] ? __do_softirq+0x0/0x109
[<c0405eec>] do_softirq+0x77/0xdb
[<c046417b>] ? handle_level_irq+0x0/0xbe
[<c04303d6>] irq_exit+0x44/0x83
[<c0405e5e>] do_IRQ+0xe7/0xfe
[<c0404654>] common_interrupt+0x28/0x30
=======================
handlers:
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
Disabling IRQ #11
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1228108543.993:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 109076 rules.
SELinux: 8192 avtab hash slots, 109076 rules.
SELinux: 8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats
SELinux: 73 classes, 109076 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1228108544.536:3): policy loaded auid=4294967295 ses=4294967295
udevd version 127 started
NET: Registered protocol family 23
nsc-ircc 00:0b: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input6
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
parport_pc 00:0a: activated
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
Yenta: CardBus bridge found at 0000:01:00.0 [1014:0185]
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 799, comm: modprobe Not tainted 2.6.27.5-117.fc10.i686 #1
[<c0463984>] __report_bad_irq+0x2e/0x6f
[<c0463b93>] note_interrupt+0x1ce/0x223
[<c0463104>] ? handle_IRQ_event+0x5c/0x64
[<c0464203>] handle_level_irq+0x88/0xbe
[<c046417b>] ? handle_level_irq+0x0/0xbe
[<c0405e3e>] do_IRQ+0xc7/0xfe
[<c0404654>] common_interrupt+0x28/0x30
[<c0430751>] ? __do_softirq+0x66/0x109
[<c04306eb>] ? __do_softirq+0x0/0x109
[<c0405eec>] do_softirq+0x77/0xdb
[<c046417b>] ? handle_level_irq+0x0/0xbe
[<c04303d6>] irq_exit+0x44/0x83
[<c0405e5e>] do_IRQ+0xe7/0xfe
[<c0404654>] common_interrupt+0x28/0x30
[<c046007b>] ? alloc_chunk+0x14/0x5c
[<c06a76be>] ? _spin_unlock_irqrestore+0x2d/0x38
[<c046379e>] setup_irq+0x1ca/0x22d
[<f8b971a1>] ? yenta_interrupt+0x0/0xbe [yenta_socket]
[<c04638ef>] request_irq+0xee/0x10c
[<f8b97591>] yenta_probe+0x2e8/0x59a [yenta_socket]
[<c0527264>] ? pci_match_device+0x9b/0xa2
[<c05277b3>] pci_device_probe+0x39/0x59
[<c05937d0>] driver_probe_device+0xa0/0x136
[<c05938a0>] __driver_attach+0x3a/0x59
[<c05931f6>] bus_for_each_dev+0x3b/0x63
[<c0593675>] driver_attach+0x14/0x16
[<c0593866>] ? __driver_attach+0x0/0x59
[<c0592c6a>] bus_add_driver+0x9d/0x1ba
[<c0593a27>] driver_register+0x81/0xe1
[<c0527972>] __pci_register_driver+0x3f/0x6d
[<f882d017>] yenta_socket_init+0x17/0x19 [yenta_socket]
[<c0401125>] _stext+0x3d/0x115
[<f882d000>] ? yenta_socket_init+0x0/0x19 [yenta_socket]
[<c0426237>] ? try_to_wake_up+0x221/0x22b
[<c044bf7d>] sys_init_module+0x87/0x178
[<c0403c76>] syscall_call+0x7/0xb
[<c06a007b>] ? init_intel_cacheinfo+0x0/0x421
=======================
handlers:
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<f8b971a1>] (yenta_interrupt+0x0/0xbe [yenta_socket])
Disabling IRQ #11
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
cs: IO port probe 0x3000-0x7fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
input: PC Speaker as /devices/platform/pcspkr/input/input7
Yenta: CardBus bridge found at 0000:01:00.1 [1014:0185]
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 799, comm: modprobe Not tainted 2.6.27.5-117.fc10.i686 #1
[<c0463984>] __report_bad_irq+0x2e/0x6f
[<c0463b93>] note_interrupt+0x1ce/0x223
[<c0463104>] ? handle_IRQ_event+0x5c/0x64
[<c0464203>] handle_level_irq+0x88/0xbe
[<c046417b>] ? handle_level_irq+0x0/0xbe
[<c0405e3e>] do_IRQ+0xc7/0xfe
[<c0404654>] common_interrupt+0x28/0x30
[<c0430751>] ? __do_softirq+0x66/0x109
[<c04306eb>] ? __do_softirq+0x0/0x109
[<c0405eec>] do_softirq+0x77/0xdb
[<c046417b>] ? handle_level_irq+0x0/0xbe
[<c04303d6>] irq_exit+0x44/0x83
[<c0405e5e>] do_IRQ+0xe7/0xfe
[<c0404654>] common_interrupt+0x28/0x30
[<c046007b>] ? alloc_chunk+0x14/0x5c
[<c06a76be>] ? _spin_unlock_irqrestore+0x2d/0x38
[<c046379e>] setup_irq+0x1ca/0x22d
[<f8b971a1>] ? yenta_interrupt+0x0/0xbe [yenta_socket]
[<c04638ef>] request_irq+0xee/0x10c
[<f8b97591>] yenta_probe+0x2e8/0x59a [yenta_socket]
[<c0527264>] ? pci_match_device+0x9b/0xa2
[<c05277b3>] pci_device_probe+0x39/0x59
[<c05937d0>] driver_probe_device+0xa0/0x136
[<c05938a0>] __driver_attach+0x3a/0x59
[<c05931f6>] bus_for_each_dev+0x3b/0x63
[<c0593675>] driver_attach+0x14/0x16
[<c0593866>] ? __driver_attach+0x0/0x59
[<c0592c6a>] bus_add_driver+0x9d/0x1ba
[<c0593a27>] driver_register+0x81/0xe1
[<c0527972>] __pci_register_driver+0x3f/0x6d
[<f882d017>] yenta_socket_init+0x17/0x19 [yenta_socket]
[<c0401125>] _stext+0x3d/0x115
[<f882d000>] ? yenta_socket_init+0x0/0x19 [yenta_socket]
[<c0426237>] ? try_to_wake_up+0x221/0x22b
[<c044bf7d>] sys_init_module+0x87/0x178
[<c0403c76>] syscall_call+0x7/0xb
[<c06a007b>] ? init_intel_cacheinfo+0x0/0x421
=======================
handlers:
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<c05d0f36>] (usb_hcd_irq+0x0/0xa3)
[<f8b971a1>] (yenta_interrupt+0x0/0xbe [yenta_socket])
[<f8b971a1>] (yenta_interrupt+0x0/0xbe [yenta_socket])
Disabling IRQ #11
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
cs: IO port probe 0x3000-0x7fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
firewire_ohci 0000:01:00.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
firewire_ohci: Added fw-ohci device 0000:01:00.2, OHCI version 1.0
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:01:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6b:8d:47:8c
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
ALSA sound/pci/ac97/ac97_codec.c:2122: AC'97 0 analog subsections not ready
firewire_core: created device fw0: GUID 00061b02011052eb, S400
intel8x0_measure_ac97_clock: measured 50970 usecs
intel8x0: measured clock 78 rejected
intel8x0: clocking to 48000
ppdev: user-space parallel port driver
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda5, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran at aivazian.fsnet.co.uk>
firmware: requesting intel-ucode/06-0b-04
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
(/home/jayeola/)
%
More information about the Fedora-laptop-list
mailing list