Help. Kernel errors, can't find common consensus

Sun Jul 16 06:15:25 UTC 2006

This issue is no longer of any concern.  The system has been disabled 
and applications moved to others.

-Jim P.

Jim Popovitch wrote:
> Hi Tim,
> 
> This system is using raid1 but not on the root partition, only on a few 
> data partitions.  Additionally there is a broadcom ethernet controller. 
>  I've had this host up and online for over 3 years and nothing has 
> changed significantly on in in the past 2 years except for regular FL 
> updates.  Here's some info:
> 
> lspci:
> 00:00.0 Host bridge: ServerWorks: Unknown device 0017 (rev 32)
> 00:00.1 Host bridge: ServerWorks: Unknown device 0017
> 00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
> 00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
> 00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
> 00:0f.2 USB Controller: ServerWorks OSB4/CSB5 USB Controller (rev 05)
> 00:0f.3 Host bridge: ServerWorks: Unknown device 0225
> 00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
> 00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
> 01:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] 
> (rev 08)
> 02:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X 
> Gigabit Ethernet (rev 02)
> 02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X 
> Gigabit Ethernet (rev 02)
> 
> cat /proc/cpuinfo:
> processor       : 0
> vendor_id       : GenuineIntel
> cpu family      : 15
> model           : 2
> model name      : Intel(R) Pentium(R) 4 CPU 2.40GHz
> stepping        : 7
> cpu MHz         : 2399.435
> cache size      : 512 KB
> fdiv_bug        : no
> hlt_bug         : no
> f00f_bug        : no
> coma_bug        : no
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 2
> wp              : yes
> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge 
> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
> bogomips        : 4784.12
> 
> dmesg:
> Pysical RAM map:
>  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000001ffe0000 (usable)
>  BIOS-e820: 000000001ffe0000 - 000000001ffe8000 (ACPI data)
>  BIOS-e820: 000000001ffe8000 - 000000001fff0000 (ACPI NVS)
>  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
>  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 511MB LOWMEM available.
> On node 0 totalpages: 131040
> zone(0): 4096 pages.
> zone(1): 126944 pages.
> zone(2): 0 pages.
> IBM machine detected. Enabling interrupts during APM calls.
> Kernel command line: auto BOOT_IMAGE=linux ro root=302 
> BOOT_FILE=/boot/vmlinuz-2.4.20-46.7.legacy pa
> nic=60 fastboot
> Initializing CPU#0
> Detected 2399.435 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 4784.12 BogoMIPS
> Memory: 511628k/524160k available (1182k kernel code, 9972k reserved, 
> 988k data, 120k init, 0k highm
> em)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: Trace cache: 12K uops, L1 D cache: 8K
> CPU: L2 cache: 512K
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
> CPU:             Common caps: bfebfbff 00000000 00000000 00000000
> CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xf0220, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
> PCI: Discovered peer bus 01
> PCI: Discovered peer bus 02
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> apm: BIOS not found.
> Starting kswapd
> VFS: Disk quotas vdquot_6.5.1
> pty: 2048 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT 
> SHARE_IRQ SERIAL_PCI ISAPNP enabl
> ed
> ttyS0 at 0x03f8 (irq = 4) is a 16550A
> Real Time Clock Driver v1.10e
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> NET4: Frame Diverter 0.46
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SvrWks CSB5: IDE controller at PCI slot 00:0f.1
> SvrWks CSB5: chipset revision 147
> SvrWks CSB5: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x3400-0x3407, BIOS settings: hda:DMA, hdb:DMA
>     ide1: BM-DMA at 0x3408-0x340f, BIOS settings: hdc:DMA, hdd:pio
> hda: ST340016A, ATA DISK drive
> hdb: CD-224E, ATAPI CD/DVD-ROM drive
> blk: queue c037a4c0, I/O limit 4095Mb (mask 0xffffffff)
> hdc: ST340016A, ATA DISK drive
> blk: queue c037a924, I/O limit 4095Mb (mask 0xffffffff)
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: attached ide-disk driver.
> hda: host protected area => 1
> hda: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66)
> hdc: attached ide-disk driver.
> hdc: host protected area => 1
> hdc: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=77536/16/63, UDMA(66)
> ide-floppy driver 0.99.newide
> Partition check:
>  hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
>  hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 >
> ide-floppy driver 0.99.newide
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: Autodetecting RAID arrays.
>  [events: 000000ab]
>  [events: 000000a7]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 00000008]
>  [events: 000000ab]
>  [events: 000000a7]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 00000008]
> md: autorun ...
> md: considering hdc12 ...
> md:  adding hdc12 ...
> md:  adding hda12 ...
> md: created md12
> md: bind<hda12,1>
> md: bind<hdc12,2>
> md: running: <hdc12><hda12>
> md: hdc12's event counter: 00000008
> md: hda12's event counter: 00000008
> md: RAID level 1 does not need chunksize! Continuing anyway.
> kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
> md: personality 3 is not loaded!
> md :do_md_run() returned -22
> md: md12 stopped.
> md: unbind<hdc12,1>
> md: export_rdev(hdc12)
> md: unbind<hda12,0>
> md: export_rdev(hda12)
> md: considering hdc11 ...
> md:  adding hdc11 ...
> md:  adding hda11 ...
> md: created md11
> md: bind<hda11,1>
> md: bind<hdc11,2>
> md: running: <hdc11><hda11>
> md: hdc11's event counter: 000000ab
> md: hda11's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
> md: personality 3 is not loaded!
> md :do_md_run() returned -22
> md: md11 stopped.
> md: unbind<hdc11,1>
> md: export_rdev(hdc11)
> md: unbind<hda11,0>
> md: export_rdev(hda11)
> md: considering hdc10 ...
> md:  adding hdc10 ...
> md:  adding hda10 ...
> md: created md10
> md: bind<hda10,1>
> md: bind<hdc10,2>
> md: running: <hdc10><hda10>
> md: hdc10's event counter: 000000ab
> md: hda10's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
> md: personality 3 is not loaded!
> md :do_md_run() returned -22
> md: md10 stopped.
> md: unbind<hdc10,1>
> md: export_rdev(hdc10)
> md: unbind<hda10,0>
> md: export_rdev(hda10)
> md: considering hdc9 ...
> md:  adding hdc9 ...
> md:  adding hda9 ...
> md: created md9
> md: bind<hda9,1>
> md: bind<hdc9,2>
> md: running: <hdc9><hda9>
> md: hdc9's event counter: 000000ab
> md: hda9's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
> md: personality 3 is not loaded!
> md :do_md_run() returned -22
> md: md9 stopped.
> md: unbind<hdc9,1>
> md: export_rdev(hdc9)
> md: unbind<hda9,0>
> md: export_rdev(hda9)
> md: considering hdc8 ...
> md:  adding hdc8 ...
> md:  adding hda8 ...
> md: created md8
> md: bind<hda8,1>
> md: bind<hdc8,2>
> md: running: <hdc8><hda8>
> md: hdc8's event counter: 000000ab
> md: hda8's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
> md: personality 3 is not loaded!
> md :do_md_run() returned -22
> md: md8 stopped.
> md: unbind<hdc8,1>
> md: export_rdev(hdc8)
> md: unbind<hda8,0>
> md: export_rdev(hda8)
> md: considering hdc7 ...
> md:  adding hdc7 ...
> md:  adding hda7 ...
> md: created md7
> md: bind<hda7,1>
> md: bind<hdc7,2>
> md: running: <hdc7><hda7>
> md: hdc7's event counter: 000000a7
> md: hda7's event counter: 000000a7
> md: RAID level 1 does not need chunksize! Continuing anyway.
> kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
> md: personality 3 is not loaded!
> md :do_md_run() returned -22
> md: md7 stopped.
> md: unbind<hdc7,1>
> md: export_rdev(hdc7)
> md: unbind<hda7,0>
> md: export_rdev(hda7)
> md: considering hdc6 ...
> md:  adding hdc6 ...
> md:  adding hda6 ...
> md: created md6
> md: bind<hda6,1>
> md: bind<hdc6,2>
> md: running: <hdc6><hda6>
> md: hdc6's event counter: 000000ab
> md: hda6's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno = 2
> md: personality 3 is not loaded!
> md :do_md_run() returned -22
> md: md6 stopped.
> md: unbind<hdc6,1>
> md: export_rdev(hdc6)
> md: unbind<hda6,0>
> md: export_rdev(hda6)
> md: ... autorun DONE.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> Linux IP multicast router 0.06 plus PIM-SM
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Freeing initrd memory: 129k freed
> VFS: Mounted root (ext2 filesystem).
> md: raid1 personality registered as nr 3
> Journalled Block Device driver loaded
> md: Autodetecting RAID arrays.
>  [events: 00000008]
>  [events: 00000008]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000ab]
>  [events: 000000a7]
>  [events: 000000a7]
>  [events: 000000ab]
>  [events: 000000ab]
> md: autorun ...
> md: considering hda6 ...
> md:  adding hda6 ...
> md:  adding hdc6 ...
> md: created md6
> md: bind<hdc6,1>
> md: bind<hda6,2>
> md: running: <hda6><hdc6>
> md: hda6's event counter: 000000ab
> md: hdc6's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> md6: max total readahead window set to 124k
> md6: 1 data-disks, max readahead per data-disk: 124k
> raid1: device hda6 operational as mirror 0
> raid1: device hdc6 operational as mirror 1
> raid1: raid set md6 active with 2 out of 2 mirrors
> md: updating md6 RAID superblock on device
> md: hda6 [events: 000000ac]<6>(write) hda6's sb offset: 2104384
> md: hdc6 [events: 000000ac]<6>(write) hdc6's sb offset: 2097536
> md: considering hda7 ...
> md:  adding hda7 ...
> md:  adding hdc7 ...
> md: created md7
> md: bind<hdc7,1>
> md: bind<hda7,2>
> md: running: <hda7><hdc7>
> md: hda7's event counter: 000000a7
> md: hdc7's event counter: 000000a7
> md: RAID level 1 does not need chunksize! Continuing anyway.
> md7: max total readahead window set to 124k
> md7: 1 data-disks, max readahead per data-disk: 124k
> raid1: device hda7 operational as mirror 0
> raid1: device hdc7 operational as mirror 1
> raid1: raid set md7 active with 2 out of 2 mirrors
> md: updating md7 RAID superblock on device
> md: hda7 [events: 000000a8]<6>(write) hda7's sb offset: 4200896
> md: hdc7 [events: 000000a8]<6>(write) hdc7's sb offset: 4194688
> md: considering hda8 ...
> md:  adding hda8 ...
> md:  adding hdc8 ...
> md: created md8
> md: bind<hdc8,1>
> md: bind<hda8,2>
> md: running: <hda8><hdc8>
> md: hda8's event counter: 000000ab
> md: hdc8's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> md8: max total readahead window set to 124k
> md8: 1 data-disks, max readahead per data-disk: 124k
> raid1: device hda8 operational as mirror 0
> raid1: device hdc8 operational as mirror 1
> raid1: raid set md8 active with 2 out of 2 mirrors
> md: updating md8 RAID superblock on device
> md: hda8 [events: 000000ac]<6>(write) hda8's sb offset: 4200896
> md: hdc8 [events: 000000ac]<6>(write) hdc8's sb offset: 4194688
> md: considering hda9 ...
> md:  adding hda9 ...
> md:  adding hdc9 ...
> md: created md9
> md: bind<hdc9,1>
> md: bind<hda9,2>
> md: running: <hda9><hdc9>
> md: hda9's event counter: 000000ab
> md: hdc9's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> md9: max total readahead window set to 124k
> md9: 1 data-disks, max readahead per data-disk: 124k
> raid1: device hda9 operational as mirror 0
> raid1: device hdc9 operational as mirror 1
> raid1: raid set md9 active with 2 out of 2 mirrors
> md: updating md9 RAID superblock on device
> md: hda9 [events: 000000ac]<6>(write) hda9's sb offset: 2152576
> md: hdc9 [events: 000000ac]<6>(write) hdc9's sb offset: 2146432
> md: considering hda10 ...
> md:  adding hda10 ...
> md:  adding hdc10 ...
> md: created md10
> md: bind<hdc10,1>
> md: bind<hda10,2>
> md: running: <hda10><hdc10>
> md: hda10's event counter: 000000ab
> md: hdc10's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> md10: max total readahead window set to 124k
> md10: 1 data-disks, max readahead per data-disk: 124k
> raid1: device hda10 operational as mirror 0
> raid1: device hdc10 operational as mirror 1
> raid1: raid set md10 active with 2 out of 2 mirrors
> md: updating md10 RAID superblock on device
> md: hda10 [events: 000000ac]<6>(write) hda10's sb offset: 2152576
> md: hdc10 [events: 000000ac]<6>(write) hdc10's sb offset: 2146432
> md: considering hda11 ...
> md:  adding hda11 ...
> md:  adding hdc11 ...
> md: created md11
> md: bind<hdc11,1>
> md: bind<hda11,2>
> md: running: <hda11><hdc11>
> md: hda11's event counter: 000000ab
> md: hdc11's event counter: 000000ab
> md: RAID level 1 does not need chunksize! Continuing anyway.
> md11: max total readahead window set to 124k
> md11: 1 data-disks, max readahead per data-disk: 124k
> raid1: device hda11 operational as mirror 0
> raid1: device hdc11 operational as mirror 1
> raid1: raid set md11 active with 2 out of 2 mirrors
> md: updating md11 RAID superblock on device
> md: hda11 [events: 000000ac]<6>(write) hda11's sb offset: 4200896
> md: hdc11 [events: 000000ac]<6>(write) hdc11's sb offset: 4194688
> md: considering hda12 ...
> md:  adding hda12 ...
> md:  adding hdc12 ...
> md: created md12
> md: bind<hdc12,1>
> md: bind<hda12,2>
> md: running: <hda12><hdc12>
> md: hda12's event counter: 00000008
> md: hdc12's event counter: 00000008
> md: RAID level 1 does not need chunksize! Continuing anyway.
> md12: max total readahead window set to 124k
> md12: 1 data-disks, max readahead per data-disk: 124k
> raid1: device hda12 operational as mirror 0
> raid1: device hdc12 operational as mirror 1
> raid1: raid set md12 active with 2 out of 2 mirrors
> md: updating md12 RAID superblock on device
> md: hda12 [events: 00000009]<6>(write) hda12's sb offset: 14779648
> md: hdc12 [events: 00000009]<6>(write) hdc12's sb offset: 14834112
> md: ... autorun DONE.
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 120k freed
> Adding Swap: 1052248k swap-space (priority -1)
> Adding Swap: 1048816k swap-space (priority -2)
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,6), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,8), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,9), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,10), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,11), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,12), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> ide-floppy driver 0.99.newide
> hdb: attached ide-cdrom driver.
> hdb: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> hdb: DMA disabled
> 
> Thanks,
> 
> -Jim P.
> 
> Tim Thome wrote:
>> Couple of questions... is this a SMP box? PCI Raid Controller? 
>> Broadcomm ethernet?
>>
>> More info on the HW config would be helpful.  dmesg dump would also be 
>> very helpful...
>>
>> Tim
>>
>> On Jul 14, 2006, at 1:41 PM, Jim Popovitch wrote:
>>
>>> Sorry for the chatter, but I am running out of places to look/ask...
>>>
>>> What does this mean, wrt a stock+FL-updated RH7.3 server (no ACPID, 
>>> APM, etc):
>>>
>>>     kernel: Uhhuh. NMI received for unknown reason 31 on CPU 0.
>>>     kernel: Dazed and confused, but trying to continue
>>>     kernel: Do you have a strange power saving mode enabled?
>>>
>>> It repeats abt every minute, over and over.
>>>
>>> Clues?  Hints?  Possibilities?
>>>
>>> Tia,
>>>
>>> -Jim P.
>>>
>>> -- 
>>> fedora-legacy-list mailing list
>>> fedora-legacy-list at redhat.com
>>> https://www.redhat.com/mailman/listinfo/fedora-legacy-list
>>
>> -- 
>> fedora-legacy-list mailing list
>> fedora-legacy-list at redhat.com
>> https://www.redhat.com/mailman/listinfo/fedora-legacy-list
>>
> 
> -- 
> fedora-legacy-list mailing list
> fedora-legacy-list at redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-legacy-list
> 