setting debug level for logs (CUPS problem)

John Cox pk at highstream.net
Mon Dec 15 04:28:32 UTC 2003


>
> ------------------------------------------------------------------------
> Subject:
> Re: setting debug level for logs
> From:
> Clifford Snow <glass-art at comcast.net>
> Date:
> Sun, 14 Dec 2003 17:56:17 -0800
> To:
> fedora-list at redhat.com
>
> To:
> fedora-list at redhat.com
>
>
>On Sun, 2003-12-14 at 16:30, John Cox wrote:
>  
>
>>I am having a problem with setting up my local printer.   Test printing 
>>doesn't work and I get a message that says I should set the log for 
>>debug level for more info. So how do I do that?
>>    
>>
>Are you using CUPS?  If so, you can set the LogLevel to debug (debug2
>for even more detail) in /etc/cupsd.conf.  I haven't tried this so be
>warned!  
>
>You might want to give us more information maybe someone here can help
>you figure out the problem.  Printers have never been my strong suite. 
>Ok - not much is.  :)
>
>  
>

I am using CUPS. I made the change to DEBUG2 but the output doesn't mean
much to me. I tried to print a test page from the printer config window.
Got no response from the printer .
The printer is a Lexmark inkjet (1020).


Here is the last sectionof the log:

D [14/Dec/2003:22:54:44 -0500] ReadClient() 9 POST / HTTP/1.1
d [14/Dec/2003:22:54:44 -0500] decode_auth(0xbf259a34): Authorization
string = ""
d [14/Dec/2003:22:54:44 -0500] decode_auth() 9 username=""
d [14/Dec/2003:22:54:44 -0500] IsAuthorized: con->uri = "/"
d [14/Dec/2003:22:54:44 -0500] FindBest: uri = "/"...
d [14/Dec/2003:22:54:44 -0500] FindBest: Location / Limit 7f
d [14/Dec/2003:22:54:44 -0500] FindBest: Location /admin Limit 7f
d [14/Dec/2003:22:54:44 -0500] FindBest: best = "/"
d [14/Dec/2003:22:54:44 -0500] IsAuthorized: auth = 0, satisfy=0...
d [14/Dec/2003:22:54:44 -0500] POST /
d [14/Dec/2003:22:54:44 -0500] CONTENT_TYPE = application/ipp
d [14/Dec/2003:22:54:44 -0500] ReadClient() 9 con->data_encoding =
length, con->data_remaining = 234, con->file = 0
d [14/Dec/2003:22:54:44 -0500] ProcessIPPRequest(0xbf259a34[9]):
operation_id = 4002
d [14/Dec/2003:22:54:44 -0500] get_printers(0xbf259a34[9], 0)
d [14/Dec/2003:22:54:44 -0500] add_printer_state_reasons(0xbf259a34[9],
0x9f51cb8[printer])
d [14/Dec/2003:22:54:44 -0500] add_queued_job_count(0xbf259a34[9],
0x9f51cb8[printer])
d [14/Dec/2003:22:54:44 -0500] copy_attrs(0x9f6e1d0, 0x9f4f5f8,
0x9f6e098, 0)
d [14/Dec/2003:22:54:44 -0500] copy_attribute(0x9f6e1d0,
0x9f4f768[printer-name,4,42])
d [14/Dec/2003:22:54:44 -0500] copy_attribute(0x9f6e1d0,
0x9f4f7b8[printer-location,4,41])
d [14/Dec/2003:22:54:44 -0500] copy_attribute(0x9f6e1d0,
0x9f4f808[printer-info,4,41])
d [14/Dec/2003:22:54:44 -0500] copy_attribute(0x9f6e1d0,
0x9f4fae0[printer-make-and-model,4,41])
d [14/Dec/2003:22:54:44 -0500] copy_attribute(0x9f6e1d0,
0x9f55790[printer-type,4,23])
d [14/Dec/2003:22:54:44 -0500] copy_attrs(0x9f6e1d0, 0x9f4c1f8,
0x9f6e098, 0)
D [14/Dec/2003:22:54:44 -0500] ProcessIPPRequest: 9 status_code=1
d [14/Dec/2003:22:54:44 -0500] ProcessIPPRequest: Adding fd 9 to
OutputSet...
d [14/Dec/2003:22:54:44 -0500] WriteClient: Removing fd 9 from OutputSet...
d [14/Dec/2003:22:54:44 -0500] ReadClient() 9, used=0
D [14/Dec/2003:22:54:44 -0500] CloseClient() 9
d [14/Dec/2003:22:54:44 -0500] CloseClient: Removing fd 9 from InputSet
and OutputSet...
d [14/Dec/2003:22:57:53 -0500] DeleteCert: removing certificate for pid 0
d [14/Dec/2003:22:57:53 -0500] AddCert: adding certificate for pid 0
D [14/Dec/2003:22:59:22 -0500] Closing client 5 after 300 seconds of
inactivity...
D [14/Dec/2003:22:59:22 -0500] CloseClient() 5
d [14/Dec/2003:22:59:22 -0500] CloseClient: Removing fd 5 from InputSet an






More information about the fedora-list mailing list