Help needed with SanDisk CRUZER memory stick
Caleb Rodriguez
calebsr2k at acm.org
Wed Dec 24 16:55:02 UTC 2003
On Wed, 2003-12-24 at 08:08, Felipe Alfaro Solana wrote:
> On Wed, 2003-12-24 at 13:58, Caleb Rodriguez wrote:
> > Thank you that kind of seemed to work for me as well. The only catch is
> > that only root can mount the drive which i should be able to change the
> > permissions.
> > When I do attempt to mount the drive I get the following:
> >
> > root at localhost etc]# mount /dev/sda1
> > mount: /dev/sda1 is not a valid block device
> >
> > Can you help me with this please?
>
> Could you please attach the contents of /proc/bus/usb/devices while the
> memory stick is attached to your system?
>
> Thanks!
>
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
Ok here goes.
[root at 014-255-706 root]# more /proc/bus/usb/devices
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1060
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=054c ProdID=0096 Rev= 1.00
S: Manufacturer=Sony
S: Product=JGD-U01
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=40ms
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=054c ProdID=0069 Rev= 1.09
S: Manufacturer=Sony
S: Product=USB Memory Stick Slot
Thank you I hope you can help.
More information about the fedora-list
mailing list