Ethernet
Eric Diamond
eric at ediamond.net
Mon Apr 12 18:12:09 UTC 2004
Monday, April 12, 2004 1:58 AM Bülent Açy'kgöz replied:
> [root at sbe-60 root]# ifconfig -a
> eth0 Link encap:Ethernet HWaddr
00:02:44:66:D3:32
> inet addr:144.122.85.60
Bcast:144.122.85.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
> RX packets:301403 errors:0 dropped:0
overruns:0 frame:0
> TX packets:115798 errors:14 dropped:0
overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:51269291 (48.8 Mb) TX
bytes:119416712 (113.8 Mb)
> Interrupt:11 Base address:0xec00
OK. Well, eth0 is up....
> [root at sbe-60 root]# ping 144.122.199.20
> PING 144.122.199.20 (144.122.199.20) 56(84) bytes of
data.
> 64 bytes from 144.122.199.20: icmp_seq=0 ttl=63
time=1.69 ms
And passing traffic....
> root at sbe-60 root]# mii-tool eth0
> eth0: 10 Mbit, half duplex, no link
But mii-tool sees no link....
>From earlier posts it was clear that ethtool also sees
no link.
Quite strange indeed.
Could I ask what ethernet hardware you're using?
Also, a couple of other threads on ethernet problems had
recommendations to change the functions that report the
link status. Have you done any of that to your
networking scripts?
Eric Diamond
eDiamond Networking & Security
303-246-9555
eric at ediamond.net
More information about the fedora-list
mailing list