Network Problem

[Sébastien Bisoglio]

Luc Bouchard wrote:
> On Mon, 2004-04-19 at 19:41, Sébastien Bisoglio wrote:
> 
>>>BTW, what NIC are you using?
>>>
>>
>>a cat /proc/cpi give me this :
>>
>>Bus  2, device  11, function  0:
>>     Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] 
>>(rev 36).
>>       IRQ 5.
>>       Master Capable.  Latency=32.  Min Gnt=10.Max Lat=10.
>>       I/O at 0xd800 [0xd87f].
>>       Non-prefetchable 32 bit memory at 0xf4000000 [0xf400007f].
>>
> 
> A few years ago when the 3C905 cards were the default card for our
> hardware we had alot of problems with the 3c905b variant. None of these
> cards would auto-negotiate properly to high speeds, all of them were
> replaced with 905c and the problem went away.  This may be what you are
> encountering.  Check your other server for the model of the card, it
> might be a newer one.
> 
> Luc Bouchard
> 
> 
Thankls for all for answer..

I've resolved this.. I've changed the NIC and all is ok !

Thanks