cdrecord / readcd problem

[John Walsh]

Hi,

Anyone else have a problem when trying to read a music CD ?

using x-cd-roast to read a music CD, it will read the track TOC fine, but 
has problems
when trying to read the tracks themselves.

so I also tried using 'readcd' directly, and get the same 'screen/log' 
output:

readcd debug=5 dev=0,1,0 f=try1.raw
dev: '0,1,0'
scg__open() 0,1,0
l1: 0x0 l2: 0x0
Bus: 0 Target: 0 Lun: 0 Chan: 0 Ino: 0
l1: 0x1 l2: 0x0
Bus: 0 Target: 1 Lun: 0 Chan: 0 Ino: 0
Target (0,1,0): DMA max 262144 old max: 262144
Target (0,1,0): DMA max 262144 old max: 262144
scgo_getbuf: 262144 bytes
ioctl ret: 0
host_status: 00 driver_status: 00
ioctl ret: 0
...
ioctl ret: 0
host_status: 00 driver_status: 00
Read  speed:  9152 kB/s (CD  52x, DVD  6x).
Write speed:     0 kB/s (CD   0x, DVD  0x).
ioctl ret: 0
host_status: 00 driver_status: 00
ioctl ret: 0
host_status: 00 driver_status: 00
Capacity: 311001 Blocks = 622002 kBytes = 607 MBytes = 636 prMB
Sectorsize: 2048 Bytes
ioctl ret: 0
host_status: 00 driver_status: 00
Copy from SCSI (0,1,0) disk to file 'try1.raw'
end:    311001
ioctl ret: 0 0 cnt: 128
host_status: 00 driver_status: 28
readcd: Input/output error. read_g1: scsi sendcmd: no error
CDB:  28 00 00 00 00 00 00 00 80 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.286s timeout 40s
readcd: Input/output error. Cannot read source disk
readcd: Retrying from sector 0.
.ioctl ret: 0
host_status: 00 driver_status: 00
ioctl ret: 0
host_status: 00 driver_status: 28
ioctl ret: 0
host_status: 00 driver_status: 00
ioctl ret: 0
host_status: 00 driver_status: 28
ioctl ret: 0
...

NB. happens in both CD-R and CD-RW/DVD-R drives.

Otherwise, I can mount data CD's and play music CD's (althought this is 
direct hardware usage I
think).

gtoaster is also quite happy to write a CD.

Any ideas ?

Thanks,
John.

ps. all other setup is the same as I had under RH90, and all working there.
eg. hde=ide-scsi hdf=ide-scsi

_________________________________________________________________
Express yourself with cool emoticons - download MSN Messenger today! 
http://www.msn.co.uk/messenger