Raid0 Raid1 boot problem.

[Chris Miller]

  I did a install with a 4 drive raid5 but after some playing I wanted
to make 2 raid1's and then make them a raid0.  So here is my problem.  
When I reboot and do a lsmod I get.


[root at localhost root]# lsmod 
Module                  Size  Used by
parport_pc             23616  1 
lp                     12300  0 
parport                34632  2 parport_pc,lp
autofs4                15488  0 
sunrpc                110280  1 
e1000                  73356  0 
e100                   30852  0 
mii                     7552  1 e100
floppy                 52336  0 
sg                     32288  0 
dm_mod                 37536  0 
ohci_hcd               19356  0 
button                  8472  0 
battery                10892  0 
asus_acpi              12440  0 
ac                      7308  0 
ipv6                  214624  14 
ext3                  108136  1 
jbd                    50328  1 ext3
raid5                  20096  0 
xor                    16904  1 raid5
aic79xx               182684  1 
sd_mod                 20352  2 
scsi_mod               97224  3 sg,aic79xx,sd_mod

#raidtab
raiddev /dev/md0
        raid-level      1
        nr-raid-disks   2
        nr-spare-disks  0
        persistent-superblock 1
        chunk-size      4
        device          /dev/sdb1
        raid-disk       0
        device          /dev/sdc1
        raid-disk       1

raiddev /dev/md1
        raid-level      1
        nr-raid-disks   2
        nr-spare-disks  0
        persistent-superblock 1
        chunk-size      4
        device          /dev/sdd1
        raid-disk       0
        device          /dev/sde1
        raid-disk       1

raiddev /dev/md2
        raid-level      0
        nr-raid-disks   2
        persistent-superblock 0
        chunk-size     4
        device          /dev/md0
        raid-disk       0
        device          /dev/md1
        raid-disk       1

My raidtab is right but the modules do not load at boot time.  Any
ideas?