FC2 Ethernet and Wireless settings
Ow Mun Heng
Ow.Mun.Heng at wdc.com
Tue Aug 17 02:25:34 UTC 2004
On Tue, 2004-08-17 at 07:24, Kevin Wang wrote:
>
> but back to the original problem: how to configure two different
> network cards even though they both end up being eth0?
Isn't this the solution to the problem already presented??
> You're on the right path. You basically have to implement card
> detection all on your own. fun, isn't it?
Yeah.. It's Fun actually. In fact, since it forces me to learn new things.
Exxxxciting!
Well, if you have problems, mail me.
> - kevin
>
> On Sun, 15 Aug 2004 10:34:14 +0800, Ow Mun Heng <ow.mun.heng at wdc.com> wrote:
> > On Wed, 2004-08-11 at 21:57, Scot L. Harris wrote:
> > > On Wed, 2004-08-11 at 00:18, Peter Smith wrote:
> > > I think there is way to configure different network profiles and then
> > > select which one you want to use. Have not done this myself but I found
> > > this which may get you going the right direction.
> > >
> > > http://www.linuxgazette.com/book/view/1754
> > (I'm replying this before I read the above link so, sorry if this is
> > duplicated)
> >
> > This is how I do it when I switch from using a pcmcia network to a
> > pcmcia wireless. Since my dell has only 1 slot, I need to configure it
> > to various different settings. (since both wants to be called eth1)
> >
> > user $ cat /etc/sysconfig/network-scripts/ifcfg-eth1
> > # Please read /usr/share/doc/initscripts-*/sysconfig.txt
> > # for the documentation of these parameters.
> > DEVICE=eth1
> > case `ifconfig eth1 | sed -ne 's/.*HWaddr *\([^ ]*\) */\1/p'` in
> > 00:60:08:B1:1C:03)
> > . eth-3com;;
> >
> > 00:09:5B:0E:0B:D1)
> > . eth-netgear;;
> >
> > *) echo "Unknown MAC address. Please update ifcfg-eth1"
> >
> > esac
> >
> > [ -n "$USERDEVICENAME" ] && echo $DEVICE > /tmp/$USERDEVICENAME
> >
> > IPV6INIT=no
> > ONBOOT=no
> > USERCTL=yes
> > PEERDNS=yes
> > TYPE=Ethernet
> > DEVICE=eth1
> > BOOTPROTO=dhcp
> >
> > user $ cat /etc/sysconfig/network-scripts/eth-3com
> > # Please read /usr/share/doc/initscripts-*/sysconfig.txt
> > # for the documentation of these parameters.
> > USERDEVICENAME=eth-3com
> > USERCTL=yes
> > PEERDNS=yes
> > ONBOOT=no
> > #BOOTPROTO=none
> > BOOTPROTO=dhcp
> > TYPE=Ethernet
> > #IPADDR=10.0.0.1
> > DEVICE=eth1
> > HWADDR=00:60:08:b1:1c:03
> > BOOTPROTO=none
> > NETMASK=255.255.255
> >
> > cat /etc/sysconfig/network-scripts/eth-netgear
> > # Please read /usr/share/doc/initscripts-*/sysconfig.txt
> > # for the documentation of these parameters.
> > USERDEVICENAME=eth-netgear
> > USERCTL=yes
> > PEERDNS=yes
> > GATEWAY=
> > ONBOOT=no
> > TYPE=Wireless
> > DHCP_HOSTNAME=
> > IPADDR=
> > DEVICE=eth1
> > HWADDR=00:09:5b:0e:0b:d1
> > BOOTPROTO=dhcp
> > DOMAIN=
> > NETMASK=
> > ESSID=
> > CHANNEL=1
> > MODE=Managed
> > KEY=
> > RATE=2Mb/s
> >
> >
> > --
> > Ow Mun Heng
> > Fedora GNU/Linux Core 2 on D600 1.4Ghz CPU kernel
> > 2.6.7-2.jul1-interactive
> > Neuromancer 07:29:54 up 1:36, 6 users, load average: 1.65, 1.60, 1.82
> >
> >
> >
> >
> > --
> > fedora-list mailing list
> > fedora-list at redhat.com
> > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> >
--
Ow Mun Heng
Fedora GNU/Linux Core 2 on D600 1.4Ghz CPU kernel
2.6.7-2.jul1-interactive
Neuromancer 10:24:29 up 51 min, 5 users, load average: 0.74, 0.77, 0.80
More information about the fedora-list
mailing list