FC2 hang during install
James Wilkinson
james at westexe.demon.co.uk
Fri Aug 20 12:17:49 UTC 2004
A while back, Tom Taylor wrote:
> I'm experiencing a hang during install of FC2 using a DVD copy from
> CheapBytes. I've used this dvd during a previous install on the same
> computer but a different hard drive with success.
>
> The previous hard drive was an array of three 36GB SCSI drives running off an
> Adaptec 29160 controller. Worked great but wanted to move these to a server
> box to use in a RAID5 system.
>
> Anyway, I replaced the SCSIs with IDE (WD 250GB). Now, when I boot from the
> dvd and start the gui install it gets as far as "running sbin/loader" and
> hangs. Just to test, I reinstalled the SCSIs and everything worked fine.
>
> The new drive is not yet formatted. I plan to use manual partitioning as I
> set up some special partitions.
>
> Hardware:
> Gigabyte GA-7DPXDW-P workstation board with dual AMD MPs
> 2GB registered RAM
> Video: nVidia gforce4
> WD 250GB HD on IDE primary master
> ZIP 750 ATAPI on IDE primary slave
> TDK DVD/CD writer on IDE secondary master
> Plextor DVD/CD writer on IDE secondary slave
>
> I suppose I could CHEAT and install some other linux (SuSE or RH) on the new
> drive but that defeats the purpose of making a FRESH install on this drive.
Are there any BIOS updates for this motherboard?
Have you tried a smaller IDE drive? Have you tried "clipping" the drive
down to a smaller size (I'm not sure if WD support this).
I'd be interested to hear if either of the other two OSes install.
James.
--
E-mail address: james | "[the computer] belonged to our Rabid NT Guy, and we
@westexe.demon.co.uk | called it Kant partly because we were naming servers
| after philosophers and theologians, and partly
| because it couldn't. -- Anthony DeBoer
More information about the fedora-list
mailing list