[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: FC3: Problems with Hauppauge WinTV PCI card



Am Mi, den 01.12.2004 schrieb Günter Schmidt um 23:58:

> I have a Hauppauge WinTV PCI card which worked after the first 
> installation of Fedora Core3 with the tvtime application. A
> Firewire card had not been detected at that moment. As I wanted
> to conncet an external disk by firewire I replaced another unused card
> and moved the firewire card.
> Now the external disk is working but the TV not.
> Can anybody say howto reset to the initial hardware detection
> and force a new one; kudzu did not solve it.

> Nov 29 21:14:33 erica kernel: bttv0: IRQ lockup, cleared int mask [bits: 
> VSYNC HSYNC VPRES* PPERR]

> Günter

There seems to be an IRQ problem. Check your BIOS settings. Check the
output of "cat /proc/interrupts" and "cat /proc/pci". If nothing can be
done from BIOS changes then use a different PCI slot for the Haupauge
card.

Alexander


-- 
Alexander Dalloz | Enger, Germany | new address - new key: 0xB366A773
legal statement: http://www.uni-x.org/legal.html
Fedora GNU/Linux Core 2 (Tettnang) on Athlon kernel 2.6.9-1.6_FC2smp 
Serendipity 00:12:02 up 11 days, 18:59, load average: 2.64, 2.47, 2.24 

Attachment: signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]